Baxter Rpw2e Retarder/proofer Used As-is

US $2300

Lucasville, Ohio, United States
May 24th

Open on mobile:
QR code

Baxter RPW2E Retarder/Proofer: Standard Features: Patented air flow system Easy access heat and humidity system • Internally mounted • No flushing requiredEye-level digital control panel • Set heat/humidity system • Four independent timers Stainless steel interior and exterior Progammable 24-hour timer for one or seven day cycle Configured for remote R404A refrigeration Modular panel construction with cam lock attachment Open floor - no ramp required 99.5" overall height to match rack oven Utilities and Notes: Water: 1/2" FNPT cold water 30-80 psi at 85" (215.9cm) AFF. Max. NOTE: Water supply must have the proper hardness, pH & chloride concentration. Consult your local water company and/or water conditioner dealer before installation. Recommended water hardness range: 2-4 grains per gallon. Recommended pH range: 7.0 to 8.0 Acceptable range for chloride concentration: 0-30 ppm. Drain: 1/2" FNPT, front or rear drain at 5" ( 12.7cm) AFF. Rte to air-gap drain. Power: Provide connection(s) at 85" (215.9cm) AFF. Natural wire circuitry needed to provide 110-120V for control components. A separate line may be run or a transformer will be required if 110-120V is not available. Refrigeration: Requirements shown are based on use of frozen product, an ambient temperature of 90 degrees F and a minimum of 2 hours to attain retarding temps from proofing temps. Consult factory for additional refrigeration requirements if faster times are needed or if fresh products are used. Installation: Floor should be level within 1/8" per foot for proper installation. Slope should not exceed 3/4" in all directions under the unit. IMPORTANT: Do not route utilities (wiring, plumbing, etc.) in or under the non-combustible floor beneath the proofer. A minimum of 1" airgap between proofer and oven recommended to ensure proper proofer operation. 10' ceiling height is recommended for proper airflow and service access. Physical DATA: Model 40.5" Interior Dimensions: 37.8"D x 52.6"W x 74.5"H Exterior Dimensions: 43.3" x 62.0"W Net Door Opening Height: 74.5" Net Door Opening Width: 51.0" Power Input with Neutral: 208-240V/3/18-21A Heat Wattage (KW): 3.3-4.4 Water Flow Rate (GPM): 0.5 Max. Water Usage (GPM): 1.0 Remote Refrigeration (std): 1 evaporator supplied 6,000 BTU/hr min. remote condenser required. ** ALL INFORMATION ABOVE IS TAKEN FROM MANUFACTURER'S SPEC SHEET. This unit is being sold AS-IS. The unit was taken from a closing coffee shop, it was in working order the last time of operation. We will re-test the unit prior to shipment. Shipping is only included when shipping to the continental US. This item is for sale locally, also. This auction may end at any time without notice. If you have any questions please contact us at 740-259-2177.