Beautiful Beltone 119 Portable Air Only Audiometer, US $149.99 – Picture 0

Beautiful Beltone 119 Portable Air Only Audiometer, US $149.99 – Picture 1

Beautiful Beltone 119 Portable Air Only Audiometer, US $149.99 – Picture 2

Beautiful Beltone 119 Portable Air Only Audiometer

US $149.99

Tucson, Arizona, United States
Jan 30th

Open on mobile:
QR code

University surplus. Beautiful condition, extra-lightly used portable audiometer. The BELTONE 119 is a screening audiometer designed to do pure tone air conduction hearing screenings. To prepare the audiometer: Open the cover. Plug in the earphones in this manner: plug the red cord into the right receptacle at the back of the audiometer; plug the blue cord into the left receptacle. Plug the audiometer into an electrical outlet. Turn the power ON by pushing the toggle switch located in the center front panel. The red light to the right of the POWER switch should be illuminated when the power is on. Check the jacks at the back of the audiometer for secure insertion. Check that the earphones are securely attached to the headset. CONTROLS The HEARING LEVEL attenuator dial is located on the right side of the audiometer. It ranges from -10 dB HL to 110 dB HL. The FREQUENCY dial is located on the left side of the audiometer. The frequency selector can be rotated continuously in either direction. It has an off position and allows the operator to test the following frequencies: 125, 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, and 8000 Hz. The tone is presented by pressing the blue pad marked “TONE” in the center of the audiometer. The red light above the blue pad should illuminate to indicate that the tone is ON. BELTONE 119 SCREENING AUDIOMETER Page 2 The RIGHT/LEFT PHONE toggle switches are located on the right side of the audiometer above the hearing level attenuator. To test the right ear move the switch to the "Right" position and to test the left ear move the switch to the "Left" position. Generally speaking, the tone used to screen hearing should be continuous. The operator does not have to move any switches to obtain this mode of presentation. The TONE MODE switch located above the Frequency Selector on the left side of the audiometer is used to have the tone is a continuous off mode, a continuous on mode or presented as a pulsed tone. Generally speaking the switch should be in the “NORM OFF” position.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Cosmetically beautiful, nice clear tones. Great headphone”