BECKETT CLEANCUT OIL PUMP 120V 3450 RPM 2184404U, US $65.00 – Picture 0

BECKETT CLEANCUT OIL PUMP 120V 3450 RPM 2184404U, US $65.00 – Picture 1

Beckett Cleancut Oil Pump 120v 3450 Rpm 2184404u

US $65.00

Wilton, New Hampshire, United States
Jan 29th

Open on mobile:
QR code

New Old Stock OEM BECKETT A2EA-6528, A2EA6528, 3450 RPM 120 vac, 4 GPH CLEANCUT OIL PUMP ***NO LONGER INCLUDES A DELAY TIMER. IF YOU NEED THE TIMER YOU MUST PURCHASE THE 21887U SEPARATELY*** ***THIS IS THE REPLACEMENT FOR THE A2EA-6520, A2EA6520, A2EA-6527, A2EA6527*** The CleanCut Solenoid Advantage The new Beckett CleanCut Pump--developed as a joint effort with Suntec Industries--combines the 'clean burning' benefits of a solenoid valve with the hefty lift capabilities of traditional American pumps. Cleaner Operation The solenoid valve cuts oil flow almost instantly when power is cut to the motor, eliminating coasting stops that can cause soot formation on shut-down. Pre-purge type controls work hand-in-hand with the CleanCut pump to establish airflow and bring pump pressure up to full operating levels before light-off. this ensures smoother and cleaner light-offs. More Reliable There are fewer moving parts, compared to conventional pumps and fewer troublesome oil fittings to cause problems. In addition, all of the moving parts in the CleanCut have been in use for years either in the US or in Europe. Reduced Load on Motor Configurations using an external valve deadhead pressure against the valve during start-up, increasing load on the motor. The CleanCut pump reduces demands on the motor during start-up by allowing oil to freely bypass the pump's piston. Higher Capacity The unique design of the CleanCut pump delivers up to 4 gallons per hour at 100 psi. (Note that applications above 3 gph will require an additional valve due to UL requirements). Leak-Through Protection The CleanCut pump utilizes the same piston valve used in traditional pumps, to provide the same level of protection from leak-through in gravity feed situations. Nozzle Pressure 100 - 200 psi Factory Ste Pressure 100 psi Operating Fluids #2 & lighter fuel oils Viscosity 1.4 - 12 cSt 0 - 25°C / 32 - 77°F in the pump Inlet pressure 10 psi max. Return pressure 10 psi max. Suction height One pipe: 8' max. Two pipe: 14' max. Rate speed 3600 rpm max. Breakaway torque 36 in.-oz. max.

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second, or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“box shows some wear, product new old stock”