+ Post new Ad
Brown & Sharpe #2 Square Base, US $3600 – Picture 0
Brown & Sharpe #2 Square Base, US $3600 – Picture 1
Brown & Sharpe #2 Square Base, US $3600 – Picture 0
Brown & Sharpe #2 Square Base, US $3600 – Picture 1

Brown & Sharpe #2 Square Base

US $3600

  • White Pigeon, Michigan, United States
  • Nov 22nd
Open on mobile:
QR code
Listed is a Brown & Sharpe #2 Square Base with an 1 1/2 inch capacity. The serial is #542-2-5369.  The electric is currently 220 3 phase. It has front and back slide tool posts and both overhead  vertical slides. The tooling is there for the front slide but not the rear. All spindle gears and cycle gears are there as well.          The only problem is with the starter. It does work and I put a new switch on it but it won't engage for automatic. I have been using a pvc cheater to engage the starter. Other than that it runs fine. There is no Feed tube and I removed some of the feeding mechanism to allow for a Bar Feed machine. Those are gone as well    It could use a good cleaning however.                             It is presently sitting in my pole barn under power but I have no means to move it. There is a Lipe Bar Feed machine that I have attached to it that I have been using which is listed on eBay as well

Directions

Similar products from Screw Machines Equipment

Oil Pan Drain Plug Screw Removal Plastic Tool Fit For T10549 VAG Skoda Seat.

Oil Pan Drain Plug Screw Removal Plastic Tool Fit For T10549 VAG Skoda Seat.

  • Shanghai, China
  • May 17th
TRAUB AUTOMATIC SCREW MACHINE MODEL A15-A20-A25

TRAUB AUTOMATIC SCREW MACHINE MODEL A15-A20-A25

  • Temecula, California, United States
  • May 16th
Cleveland Twist Drill National Acme Vers-O-Tool 1" DR Revolving Die Head

Cleveland Twist Drill National Acme Vers-O-Tool 1" DR Revolving Die Head

  • Carson, California, United States
  • May 15th
GEOMETRIC 2" INTERNAL DIE HEAD 1-1/2" SHANK 18 TPI CHASERS

GEOMETRIC 2" INTERNAL DIE HEAD 1-1/2" SHANK 18 TPI CHASERS

  • Ellington, New York, United States
  • May 13th
GEOMETRIC 1-1/4" INTERNAL DIE HEAD 1-1/4" SHANK 18 TPI CHASERS

GEOMETRIC 1-1/4" INTERNAL DIE HEAD 1-1/4" SHANK 18 TPI CHASERS

  • Ellington, New York, United States
  • May 13th
Spindle For A Brown & Sharpe Ultra Screw Machine P/N 42-11892-1 made in ENGLAND

Spindle For A Brown & Sharpe Ultra Screw Machine P/N 42-11892-1 made in ENGLAND

  • Hebron, Indiana, United States
  • May 11th
GREENLEE SCREW MACHINE 1 5/8" WITH RACK OF TOOLING

GREENLEE SCREW MACHINE 1 5/8" WITH RACK OF TOOLING

  • Carson, California, United States
  • May 11th
5/16 DSA GEOMETRIC SELF OPENING DIE HEAD WITH A 5/8" SHANK

5/16 DSA GEOMETRIC SELF OPENING DIE HEAD WITH A 5/8" SHANK

  • Nampa, Idaho, United States
  • Nov 27th
Brown & Sharpe #2 &3 6 hole turret disc

Brown & Sharpe #2 &3 6 hole turret disc

  • Dayton, Ohio, United States
  • Nov 27th
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm Y

New Automatic Screw Feeder Supplier 1.0 – 5.0 mm Y

  • CN,CN, China
  • Nov 24th
Lipe Bar Feed Gaurd for Gears

Lipe Bar Feed Gaurd for Gears

  • Dayton, Ohio, United States
  • Nov 21st
Brown & Sharpe #2 & #3 Ultramatic Control Drum Complete

Brown & Sharpe #2 & #3 Ultramatic Control Drum Complete

  • Dayton, Ohio, United States
  • Nov 21st
Brown & Sharpe Square Tool Post

Brown & Sharpe Square Tool Post

  • Dayton, Ohio, United States
  • Nov 21st
Brown & Sharpe Adjustable Stub Collet Holder

Brown & Sharpe Adjustable Stub Collet Holder

  • Dayton, Ohio, United States
  • Nov 21st
Brown & Sharpe Miniature Revolving Stock Stop

Brown & Sharpe Miniature Revolving Stock Stop

  • Dayton, Ohio, United States
  • Nov 21st
Brown & Sharpe 22H 1 1/16 rd. Finger Feed

Brown & Sharpe 22H 1 1/16 rd. Finger Feed

  • Dayton, Ohio, United States
  • Nov 21st
Peterson Insert Holder for Brown & Sharpe front or rear cross slides

Peterson Insert Holder for Brown & Sharpe front or rear cross slides

  • Dayton, Ohio, United States
  • Nov 21st
Brown & Sharpe Adjustable Holder w/ 5/8-1"

Brown & Sharpe Adjustable Holder w/ 5/8-1"

  • Dayton, Ohio, United States
  • Nov 21st
(Lot of 2) Geometric 1-1/4" Die Heads w/ 1" Shank

(Lot of 2) Geometric 1-1/4" Die Heads w/ 1" Shank

  • Fort Thomas, Kentucky, United States
  • Nov 20th
FETTE THREAD ROLLS 10-24/12-24 UNC ARTICLE 2169080

FETTE THREAD ROLLS 10-24/12-24 UNC ARTICLE 2169080

  • Colorado Springs, Colorado, United States
  • Nov 20th

People who viewed this item also vieved

5/16 BILZ #2 TAP COLLET FOR 5/16, M7 & M8 TAP, TORQUE CONTROL ADAPTER LOT C4897

5/16 BILZ #2 TAP COLLET FOR 5/16, M7 & M8 TAP, TORQUE CONTROL ADAPTER LOT C4897

  • Dayton, Ohio, United States
  • Jan 30th
NEW!!! LOT OF 27 UNION BUTTERFIELD HSS PILOTS 9/16" TO 13/16"

NEW!!! LOT OF 27 UNION BUTTERFIELD HSS PILOTS 9/16" TO 13/16"

  • Ellington, New York, United States
  • Jan 30th
NATIONAL ACME COLLAPSIBLE TAPPING HEAD 1-3/4" RANGE 1-3/8" SHANK

NATIONAL ACME COLLAPSIBLE TAPPING HEAD 1-3/4" RANGE 1-3/8" SHANK

  • Ellington, New York, United States
  • Jan 30th
ISTEMA SYSTEM 3R EDM INDEX COLLET HOLDER W/CHUCK- FREE SHIPPING

ISTEMA SYSTEM 3R EDM INDEX COLLET HOLDER W/CHUCK- FREE SHIPPING

  • Rochester, New York, United States
  • Jan 30th
SYSTEM 3R 3R-651 52x52MM PALETT W/ 3/4" HOLDER FREE SHIPPING

SYSTEM 3R 3R-651 52x52MM PALETT W/ 3/4" HOLDER FREE SHIPPING

  • Rochester, New York, United States
  • Jan 30th
MECATOOL SYSTEM 3R EDM TOOL CHUCK C185300

MECATOOL SYSTEM 3R EDM TOOL CHUCK C185300

  • Rochester, New York, United States
  • Jan 30th
Mubea Ironworker by Muhr and Bender NO RESERVE

Mubea Ironworker by Muhr and Bender NO RESERVE

  • Oregon, Illinois, United States
  • Jan 30th
S5 Nilson Fourslide, 1973, Nice

S5 Nilson Fourslide, 1973, Nice

  • Bridgeport, Connecticut, United States
  • Jan 30th
Quickwork Division of Whiting Circle Shear, 1/4" mild steel

Quickwork Division of Whiting Circle Shear, 1/4" mild steel

  • Bridgeport, Connecticut, United States
  • Jan 30th
UNUSED! SUNNEN HONING MANDREL 1/32" SHIM FOR "V" SERIES MANDREL SHOE LN-1141

UNUSED! SUNNEN HONING MANDREL 1/32" SHIM FOR "V" SERIES MANDREL SHOE LN-1141

  • Chino, California, United States
  • Jan 30th
Sunnen Shoes

Sunnen Shoes

  • Pittsburg, California, United States
  • Jan 30th
Sunnen K4 & K5 Stones

Sunnen K4 & K5 Stones

  • Pittsburg, California, United States
  • Jan 30th
Cincinnati-Milacron 10" x 24" / 30" Plain Hydraulic Cylindrical Grinder 370-10

Cincinnati-Milacron 10" x 24" / 30" Plain Hydraulic Cylindrical Grinder 370-10

  • Dayton, Ohio, United States
  • Jan 30th
Interstate - Roughing End Mills | Mill Diameter (Inch): 1/2 | Material: Cobalt

Interstate - Roughing End Mills | Mill Diameter (Inch): 1/2 | Material: Cobalt

  • Allentown, Pennsylvania, United States
  • Jan 30th
YUASA 550-000 Diamond Radius And Angle Dresser For Surface Grinder

YUASA 550-000 Diamond Radius And Angle Dresser For Surface Grinder

  • Hoffman Estates, Illinois, United States
  • Jan 30th
Original SOUTH BEND LATHE 9 Inch Model A PARTS LIST 1945 Bench Lathe

Original SOUTH BEND LATHE 9 Inch Model A PARTS LIST 1945 Bench Lathe

  • Puyallup, Washington, United States
  • Jan 30th
5 inch 6 jaw Buck chuck South Bend, Atlas lathe 1 1/2 x 8 tpi mounting plate

5 inch 6 jaw Buck chuck South Bend, Atlas lathe 1 1/2 x 8 tpi mounting plate

  • Fort Myers, Florida, United States
  • Jan 30th
craftsman 109 lathe spindle (custom)

craftsman 109 lathe spindle (custom)

  • Spring Hill, Kansas, United States
  • Jan 30th
Bridgeport 6F Power Feed Parts

Bridgeport 6F Power Feed Parts

  • Spring Grove, Pennsylvania, United States
  • Jan 30th
DAPRA EXTENDED REACH END MILL CC-SSER1000-8000-R55-2 CARBIDE CORE USED

DAPRA EXTENDED REACH END MILL CC-SSER1000-8000-R55-2 CARBIDE CORE USED

  • Naperville, Illinois, United States
  • Jan 30th
DAPRA INDEXABLE END MILL HFEM100 450 R3 2

DAPRA INDEXABLE END MILL HFEM100 450 R3 2

  • Naperville, Illinois, United States
  • Jan 30th
Proto 6202A 750 Ft Lb Torque Multiplier

Proto 6202A 750 Ft Lb Torque Multiplier

  • Millstone Township, New Jersey, United States
  • Jan 30th
Doran Apton Air Hammer Sheet Metal Ductwork

Doran Apton Air Hammer Sheet Metal Ductwork

  • Auburn, Washington, United States
  • Jan 30th
DREMEL Moto Shop Jig Saw Model 15-2

DREMEL Moto Shop Jig Saw Model 15-2

  • Lorain, Ohio, United States
  • Jan 30th
ENCO MODEL: 01712009 VERTICAL BANDSAW

ENCO MODEL: 01712009 VERTICAL BANDSAW

  • Oceanside, California, United States
  • Jan 30th
1998 Amada H1080 Saw

1998 Amada H1080 Saw

  • Shawano, Wisconsin, United States
  • Jan 30th
Nice Heavy Duty Horizontal Band Saw Amada HA250 HA-250 10" x 10"

Nice Heavy Duty Horizontal Band Saw Amada HA250 HA-250 10" x 10"

  • Baldwin Park, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies