+ Post new Ad
BT40 DRILL CHUCK TOOL HOLDER (Maritool), US $100.00 – Picture 0
BT40 DRILL CHUCK TOOL HOLDER (Maritool), US $100.00 – Picture 1
BT40 DRILL CHUCK TOOL HOLDER (Maritool), US $100.00 – Picture 0
BT40 DRILL CHUCK TOOL HOLDER (Maritool), US $100.00 – Picture 1

Bt40 Drill Chuck Tool Holder (maritool)

US $100.00

  • Punta Gorda, Florida, United States
  • Jan 30th
Open on mobile:
QR code
Drill Chuck is screwed from the back to ensure it does not come out during high cutting loads All critical surfaces precision ground Made from alloy steel hardened to 54 - 56rc Jaws are hardened to over 60rc Balanced to 15,000 rpms Gage length is 110mm (4.3 inches) This unit can hold shanks from .019-.511 (.5-13mm) Rear thread for pull stud is M16 X 2.0 Wrench included MariTool Part# is BT40-APU13-110
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Maritool
Brand Maritool
Country/Region of Manufacture United States

Directions

Similar products from BT Tool Holders

KENNAMETAL S16T-STUPR8 INDEXABLE BORING BAR TOOL HOLDER LATHE HAAS CNC MORI LMSI

KENNAMETAL S16T-STUPR8 INDEXABLE BORING BAR TOOL HOLDER LATHE HAAS CNC MORI LMSI

  • Sun Valley, California, United States
  • Jan 30th
4" COMMAND C6S5-1500 19190-19 FACE SHELL MILL CAT 50 CAT50 CT50 TOOL HOLDER LMSI

4" COMMAND C6S5-1500 19190-19 FACE SHELL MILL CAT 50 CAT50 CT50 TOOL HOLDER LMSI

  • Sun Valley, California, United States
  • Jan 30th
"NEW" RICHMILL COMPRESSION TAPPING TAP TOOL HOLDER CAT40 CT40-RTN22-2 CT LMSI

"NEW" RICHMILL COMPRESSION TAPPING TAP TOOL HOLDER CAT40 CT40-RTN22-2 CT LMSI

  • Sun Valley, California, United States
  • Jan 30th
"NEW" NIKKEN CAT50-SLB36-120 CT50 CT CAT TOOL HOLDER TOOLHOLDER HAAS CNC LMSI

"NEW" NIKKEN CAT50-SLB36-120 CT50 CT CAT TOOL HOLDER TOOLHOLDER HAAS CNC LMSI

  • Sun Valley, California, United States
  • Jan 30th
"NEW" NIKKEN CT40 MT3 MORSE TAPER TOOLHOLDER CT CAT40-MTA3-135 TOOL HOLDER LMSI

"NEW" NIKKEN CT40 MT3 MORSE TAPER TOOLHOLDER CT CAT40-MTA3-135 TOOL HOLDER LMSI

  • Sun Valley, California, United States
  • Jan 30th
"NEW" PARLEC C50-16HP3 C5016HP3 CAT50 CAT 50 CT50 CT TOOL HOLDER TOOLHDER LMSI

"NEW" PARLEC C50-16HP3 C5016HP3 CAT50 CAT 50 CT50 CT TOOL HOLDER TOOLHDER LMSI

  • Sun Valley, California, United States
  • Jan 30th
NEW! Lyndex Nikken BT-50 1" Balanced Endmill Holder 4" long B5006-1000

NEW! Lyndex Nikken BT-50 1" Balanced Endmill Holder 4" long B5006-1000

  • Prospect Heights, Illinois, United States
  • Jan 30th
BT 40 Endmill Holder Lot (Maritool)

BT 40 Endmill Holder Lot (Maritool)

  • Punta Gorda, Florida, United States
  • Jan 30th
BT 40 ER-16 Collet Toolholder (Maritool)

BT 40 ER-16 Collet Toolholder (Maritool)

  • Punta Gorda, Florida, United States
  • Jan 30th
BT 40 ER-32 Collet Toolholder (Maritool)

BT 40 ER-32 Collet Toolholder (Maritool)

  • Punta Gorda, Florida, United States
  • Jan 30th
NICE ACME FETTE N-1 THREAD ROLLING HEAD W/ 5/8" SHANK 1/4" - 7/16" RANGE

NICE ACME FETTE N-1 THREAD ROLLING HEAD W/ 5/8" SHANK 1/4" - 7/16" RANGE

  • Cleveland, Ohio, United States
  • Jan 30th
"NEW" RICHMILL CT50-SL1.1/4-4.00 CAT50 CT 50 CAT TOOL HOLDER 1.250" CT50 LMSI

"NEW" RICHMILL CT50-SL1.1/4-4.00 CAT50 CT 50 CAT TOOL HOLDER 1.250" CT50 LMSI

  • Sun Valley, California, United States
  • Jan 30th
5" LYNDEX FACE SHELL MILL CAT CAT50 CT50 TOOL HOLDER MITSUBISHI SG20R0506E LMSI

5" LYNDEX FACE SHELL MILL CAT CAT50 CT50 TOOL HOLDER MITSUBISHI SG20R0506E LMSI

  • Sun Valley, California, United States
  • Jan 30th
PARLEC CAT50 CT50 CT TOOL HOLDER C50-32HP4 COLLET TOOLHOLDER C5032HP4 HAAS LMSI

PARLEC CAT50 CT50 CT TOOL HOLDER C50-32HP4 COLLET TOOLHOLDER C5032HP4 HAAS LMSI

  • Sun Valley, California, United States
  • Jan 30th
PARLEC MT2 CAT50 CT50 CT TOOL HOLDER C50-03MT2 MORSE TAPER TOOLHOLDER HAAS LMSI

PARLEC MT2 CAT50 CT50 CT TOOL HOLDER C50-03MT2 MORSE TAPER TOOLHOLDER HAAS LMSI

  • Sun Valley, California, United States
  • Jan 30th
PARLEC MOD. CODE B3 H100-18EM3 HSK100 3/16 END MILL TOOL HOLDER TOOLHOLDER LMSI

PARLEC MOD. CODE B3 H100-18EM3 HSK100 3/16 END MILL TOOL HOLDER TOOLHOLDER LMSI

  • Sun Valley, California, United States
  • Jan 30th
DEVLIEG MICROBORE INDEXABLE BORE 50CT-ADE-1412-30 CAT50 CT50 CT TOOL HOLDER LMSI

DEVLIEG MICROBORE INDEXABLE BORE 50CT-ADE-1412-30 CAT50 CT50 CT TOOL HOLDER LMSI

  • Sun Valley, California, United States
  • Jan 30th
DEVLIEG MICROBORE INDEXABLE BORE BORRING HEAD CAT50 CT50 CT 50 TOOL HOLDER LMSI

DEVLIEG MICROBORE INDEXABLE BORE BORRING HEAD CAT50 CT50 CT 50 TOOL HOLDER LMSI

  • Sun Valley, California, United States
  • Jan 30th
DEVLIEG MICROBORE INDEXABLE BORE BORRING HEAD CT50 CAT50 CT 50 TOOL HOLDER LMSI

DEVLIEG MICROBORE INDEXABLE BORE BORRING HEAD CT50 CAT50 CT 50 TOOL HOLDER LMSI

  • Sun Valley, California, United States
  • Jan 30th
DEVLIEG MICROBORE INDEXABLE BORE HEAD 50CT-66 CT50 CAT50 CT 50 TOOL HOLDER LMSI

DEVLIEG MICROBORE INDEXABLE BORE HEAD 50CT-66 CT50 CAT50 CT 50 TOOL HOLDER LMSI

  • Sun Valley, California, United States
  • Jan 30th

People who viewed this item also vieved

30 PCS CAT40 PULL STUD COOLANT KNOB CAT 40 CNC

30 PCS CAT40 PULL STUD COOLANT KNOB CAT 40 CNC

  • Manchester, Connecticut, United States
  • Jun 11th
Lyndex Tap Collet #2 NT10-032 1/2''

Lyndex Tap Collet #2 NT10-032 1/2''

  • Lewisville, Texas, United States
  • Jun 11th
NEW 1/2" TOP NOTCH CARBIDE BORING BAR W/ 5 KENNAMETAL INSERT NG 2125 RK {G16}

NEW 1/2" TOP NOTCH CARBIDE BORING BAR W/ 5 KENNAMETAL INSERT NG 2125 RK {G16}

  • Mentor, Ohio, United States
  • May 24th
1 NEW 1" CARBIDE BORING BAR. TAKES CCMT 32.5 INSERT C16-SCLCR-3. 10-1/4" OAL B30

1 NEW 1" CARBIDE BORING BAR. TAKES CCMT 32.5 INSERT C16-SCLCR-3. 10-1/4" OAL B30

  • Mentor, Ohio, United States
  • May 24th
KOMET 20MM DIAMETER PINS PART# UL0207020

KOMET 20MM DIAMETER PINS PART# UL0207020

  • Cadiz, Kentucky, United States
  • May 26th
PALBIT 1-1/4" INDEXABLE HIGH FEED EXTENDED REACH END MILL WITH INSERTS

PALBIT 1-1/4" INDEXABLE HIGH FEED EXTENDED REACH END MILL WITH INSERTS

  • Cadiz, Kentucky, United States
  • May 26th
1''SS FLUSH MILLING ARBOR - PETERSON

1''SS FLUSH MILLING ARBOR - PETERSON

  • Duncan, South Carolina, United States
  • May 27th
TTC Arbor Support

TTC Arbor Support

  • Duncan, South Carolina, United States
  • May 27th
NEW BROWNING H40H23 SPROCKET 23 TEETH, NEW IN BOX, NEW OLD STOCK

NEW BROWNING H40H23 SPROCKET 23 TEETH, NEW IN BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • May 28th
NEW BROWNING H40H22 SPROCKET 22 TEETH, NEW IN BOX, NEW OLD STOCK

NEW BROWNING H40H22 SPROCKET 22 TEETH, NEW IN BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • May 28th
Komet ABS 32 Boring Bar .625" Min Diameter

Komet ABS 32 Boring Bar .625" Min Diameter

  • Johnson City, New York, United States
  • Jun 3rd
Komet ABS 40 Boring Bar .716" Min Diameter

Komet ABS 40 Boring Bar .716" Min Diameter

  • Johnson City, New York, United States
  • Jun 3rd
KWIK SWITCH 200 MORSE TAPER #3 80228 MT #3 MORE TOOL HOLDERS LISTED LOT C9981

KWIK SWITCH 200 MORSE TAPER #3 80228 MT #3 MORE TOOL HOLDERS LISTED LOT C9981

  • Dayton, Ohio, United States
  • Jun 9th
BILZ #1 7/16" TAP COLLET FOR 7/16" TAP MORE COLLETS ADAPTERS LISTED LOT D14026

BILZ #1 7/16" TAP COLLET FOR 7/16" TAP MORE COLLETS ADAPTERS LISTED LOT D14026

  • Dayton, Ohio, United States
  • Jun 9th
Jacobs Ball Bearing Super Chuck No. 14N cap 0-1/2 w/jacobs arbor # 3 morse tape

Jacobs Ball Bearing Super Chuck No. 14N cap 0-1/2 w/jacobs arbor # 3 morse tape

  • West Chicago, Illinois, United States
  • Jun 9th
use box with use CHUCKS

use box with use CHUCKS

  • Port Washington, New York, United States
  • Jun 9th
K6-185CH SUNNEN HONE MANDREL WITH ADAPTER .185" - .190" RANGE

K6-185CH SUNNEN HONE MANDREL WITH ADAPTER .185" - .190" RANGE

  • Cleveland, Ohio, United States
  • Jun 18th
AL20-994LC SUNNEN HONE MANDREL WITH ADAPTER & TRUING SLEEVE .994" - 1.031" RANGE

AL20-994LC SUNNEN HONE MANDREL WITH ADAPTER & TRUING SLEEVE .994" - 1.031" RANGE

  • Cleveland, Ohio, United States
  • Jun 18th
57mm 600W Air cooled Brushed Spindle Motor + Mount Bracket + Speed controller

57mm 600W Air cooled Brushed Spindle Motor + Mount Bracket + Speed controller

  • Guangzhou , China
  • Oct 28th
TIC TAPMATIC REVERSIBLE TAPPING ATTACHMENT MODEL 1A

TIC TAPMATIC REVERSIBLE TAPPING ATTACHMENT MODEL 1A

  • Petaluma, California, United States
  • Oct 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies