+ Post new Ad
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 0
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 1
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 2
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 3
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 0
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 1
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 2
Bundle of 6 Outside Corner Protectors Trim .063 x 3" x 1" Diamond Tread, US $45.99 – Picture 3

Bundle Of 6 Outside Corner Protectors Trim .063 X 3" X 1" Diamond Tread

US $45.99

  • Elyria, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
  Bundle of 6  Outside Corner Protectors .063 3" x 1" x 48" Diamond Tread Sheet/ Brite  3003 H-22 Aluminum polished to a mirror finish. This Aluminum is used as corner protector trim to enhance  your project such as  enclosed trailer , garage and man caves trim. At C and J Aluminum we specialize in building all of our products out of polished Aluminum Diamond sheet, plate tread  from materials that are used the trailer industry for trim, stone guard in from of the trailer, flooring covering, chair rails, this list goes on.  In addition we offer custom inside and outside corners. We also offer Cut  and bend services with purchases of pieces of Aluminum Tread Sheet. With all of our Bulk stock we offer to cut to size for a additional cost. $2.00 for the per cut, we also can bend to order for a additional $2.00 per bend. Check out our inside corners See our Ebay store for details on custom cuts and bends. If you have any questions on our products  and services feel free to contact us at the following: You can reach us from 9 am to 9 pm eastern time 7 days a week, 440-822-7848 ask for Chuck Thanks C & J Aluminum
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture United States

Directions

Similar products from Metals & Fusions

T -itanium Nail 10mm Extended Arm Male G.R.2 Domeless +Jar

T -itanium Nail 10mm Extended Arm Male G.R.2 Domeless +Jar

  • Panama City, Florida, United States
  • Jan 30th
1045 TGP 1 1/4", 3/4" Machinists Lathe Stock, 8" long

1045 TGP 1 1/4", 3/4" Machinists Lathe Stock, 8" long

  • United States
  • Jan 30th
BRONZE ALUMINUM 3/4"+(.786 Dia.) Round bar stock end cut approx. 1' long C95510

BRONZE ALUMINUM 3/4"+(.786 Dia.) Round bar stock end cut approx. 1' long C95510

  • Hawthorne, New Jersey, United States
  • Jan 30th
SS Non-Magnetic 80/20 T-Slot Support Strut Brace 65”+

SS Non-Magnetic 80/20 T-Slot Support Strut Brace 65”+

  • Athol, Massachusetts, United States
  • Jan 30th
Aluminum E-Cigarette E-Cig Ego Vape Stand 4 holes Holder Vapor [A004} 1.25

Aluminum E-Cigarette E-Cig Ego Vape Stand 4 holes Holder Vapor [A004} 1.25

  • Los Angeles, California, United States
  • Jan 30th
Aluminum E-Cigarette E-Cig Ego Vape Stand 4 holes Holder / Vapor [A004] 1.25

Aluminum E-Cigarette E-Cig Ego Vape Stand 4 holes Holder / Vapor [A004] 1.25

  • Los Angeles, California, United States
  • Jan 30th
Lot of STEEL ROUND STOCK machine shop rod bar

Lot of STEEL ROUND STOCK machine shop rod bar

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
SOLID ROUND BRASS ROD BAR 1 pcs. 3/4" DIAMETER X 7" OR LONGER 360

SOLID ROUND BRASS ROD BAR 1 pcs. 3/4" DIAMETER X 7" OR LONGER 360

  • Kendallville, Indiana, United States
  • Jan 30th
New 16 oz copper sheet 12" x 12"

New 16 oz copper sheet 12" x 12"

  • Waterloo, Illinois, United States
  • Jan 30th
5/16” 304 Stainless Steel Round Bar / Rod 24” 4 Pcs.

5/16” 304 Stainless Steel Round Bar / Rod 24” 4 Pcs.

  • Independence, Kentucky, United States
  • Jan 30th
Tungsten bar 1.79 lb

Tungsten bar 1.79 lb

  • Wichita, Kansas, United States
  • Jan 30th
Catalytic Converter For Scrap Only 10 Lbs !!! Free shipping!

Catalytic Converter For Scrap Only 10 Lbs !!! Free shipping!

  • Paradise, Pennsylvania, United States
  • Jan 30th
Aluminum Round Tubing – 1.25" OD x .090” x 48" Long NEW, .062, .1 1/4 IN.

Aluminum Round Tubing – 1.25" OD x .090” x 48" Long NEW, .062, .1 1/4 IN.

  • Old Fort, North Carolina, United States
  • Jan 30th
Steel, Aluminum Spacer Disks 2", 1-5/8" Diameter Lot of 4

Steel, Aluminum Spacer Disks 2", 1-5/8" Diameter Lot of 4

  • Vancouver, Washington, United States
  • Jan 30th
Aluminum Flat Sheet Stock 12 in x 48 in, 1/4 thick, .25in, Bar, USA!

Aluminum Flat Sheet Stock 12 in x 48 in, 1/4 thick, .25in, Bar, USA!

  • Old Fort, North Carolina, United States
  • Jan 30th
BRASS BUSHING 13J164 DR 4 15/16" OD, 4 1/2 ID" 1/4" THICK, 2 7/16 Long, NEW

BRASS BUSHING 13J164 DR 4 15/16" OD, 4 1/2 ID" 1/4" THICK, 2 7/16 Long, NEW

  • Ely, Minnesota, United States
  • Jan 30th
Kick Plate Door Protector Trim .063 x 4" x 30" Diamond Tread / Brite

Kick Plate Door Protector Trim .063 x 4" x 30" Diamond Tread / Brite

  • Elyria, Ohio, United States
  • Jan 30th
Zinc ingots, nice buttons, Zamak series, probably #3, great casting! 11.5+ lbs.

Zinc ingots, nice buttons, Zamak series, probably #3, great casting! 11.5+ lbs.

  • Midlothian, Illinois, United States
  • Jan 30th
48 inchesTitanium tubing, 2-1/2" OD, X .025 wall, type 1, BMS 721, unused

48 inchesTitanium tubing, 2-1/2" OD, X .025 wall, type 1, BMS 721, unused

  • Herington, Kansas, United States
  • Jan 30th
S-7 Tool Steel -- 1 1/2" Round Bar -- 1.5" Diameter Rod -- 12", or by the inch

S-7 Tool Steel -- 1 1/2" Round Bar -- 1.5" Diameter Rod -- 12", or by the inch

  • Asheville, North Carolina, United States
  • Jan 30th

People who viewed this item also vieved

VINTAGE NORTON ABRASIVES RESINOID PRODUCTS CATALOG #174 DATED 1954

VINTAGE NORTON ABRASIVES RESINOID PRODUCTS CATALOG #174 DATED 1954

  • Novelty, Ohio, United States
  • Jun 9th
CENTRAL MACHINERY PLANISHING HAMMER FRAME, AND STAND SKU 94847 HARBOR FREIGHT

CENTRAL MACHINERY PLANISHING HAMMER FRAME, AND STAND SKU 94847 HARBOR FREIGHT

  • Roanoke, Indiana, United States
  • Jun 9th
New 1/2 inch 12.5MM Capital Letters And Number Marking Metal Punch Stamp- 36 Pcs

New 1/2 inch 12.5MM Capital Letters And Number Marking Metal Punch Stamp- 36 Pcs

  • New Delhi, India
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies