Calibrated Weller Dec1001 Dual Soldering Station W/ Dual Ec1201a Irons & Stands

US $224

  • Dallas, Texas, United States
  • Jun 9th
You are bidding on a Weller DEC1001 ESD Safe 130W Dual Variable Temperature Soldering Station with complete set of (2) EC1201A 40W ESD Soldering Tools, (2) PH1201ESD ESD Safe Soldering Tool Stands, (2) TC205 Soldering Sponges, (2) NEW ET Series Tips and all original printed materials. The DEC1001 combines two separate control units in one housing.  Both channels operate completely independently and can be operated simultaneously.  Tip temperature is fully variable from 350°F - 850°F (175°C - 455°C) and is controlled for each channel by independent analog dials.  The station is 100% operational, fully tested and calibrated and meets or exceeds manufacturers original specifications. This system includes (2) Weller EC1201A 40W ESD Soldering Tools.  The EC1201A is ESD Safe and the cord is made from non-burnable silicon rubber.  ET Series Tips are readily available in over 30 different tip geometries.  Both soldering tips are NEW and two different tip geometries are included in the set so you can cover a wide range of soldering tasks right away.  (2) Weller PH1201ESD ESD Safe Soldering Tool Stands are also included in the package as well as (2) NEW Weller TC205 Soldering Sponges.  Each PH1201ESD Iron Stand has 6 Tip Storage Slots for immediate accessibility while you work (3 ET Series Slots and 3 EPH Series Slots) in addition to the TC205 Sponge Tray and Water Reservoir below.  If you have no need for the EPH Tip Slots and would prefer 12 ET Series Tip Slots instead, let me know and I will widen the narrow EPH Series Tip Slots to accommodate the larger ET Series Tips. The Weller DEC1001 is compatible with any of the following Weller Soldering Tools: EC1201A, EC1201P, EC1503A, EC1503B, EC1302A, EC1302B, EC1204A, EC1204P, EC1504A, EC1504P, DS1204A.  Please feel free to contact me if you are unsure of the compatibility of the DEC1001 with any of your Weller Soldering Tools. This is an extremely versatile, fully variable dual soldering system with more than enough power to cover even the most demanding lead-free soldering applications.  It is designed for dual simultaneous operation on shared workstations and can be incredibly effective for the single operator as well.  Two separate soldering tool/tip configurations can be kept plugged in and ready to go at any given time or in the case of mixed lead/lead-free process environments, one channel can be designated for each process by the user.  Other than a couple of minor scratches from normal use, this system is in near perfect condition!  I do not waste your time or money with Powers On/No Further Testing, Untested, or AS-IS Soldering Stations.  This system conforms 100% to original manufacturers specifications and a complete calibration has been performed.  A final calibration will be performed immediately prior to being shipped. Calibration and calibration checks can be performed by the user, however, additional equipment is required.  This auction includes the following: Weller DEC1001-0 130W Power Supply (S/N: 1200) (2) Weller EC1201A 40W Soldering Tools (2) Weller PH1201ESD Soldering Tool Stands (2) NEW Weller TC205 Soldering Sponges (2) NEW Weller ET Series Tips Weller DEC1001 Soldering Station User Guide Weller EC1201A Soldering Tool Tech/Repair Sheet Weller Tip Selection Guide Weller Tip Care & Use Guide SPECIFICATIONS Power Input     120VAC, 60hz, 130 Watts Power Unit Output Voltage     Isolated 24 VAC @ 3.4 amperes Size     4.5" x 5.875" x 3.625" Weight (Total Unit including Irons & Stands)     5.4 lbs. Line Cord     3 wire, UL recognized Tip-to-Ground Potential       < 2 mV True RMS Tip-to-Ground Resistance     < 2 ohms Tip Temperature Control Range     350°F - 850°F (175°C - 455°C) Control Setting Resolution     10°F (5°C) Control Accuracy     ± 10°F (± 6°C) at idle Ambient Temperature Range     60°F to 110°F (16°C to 44°C) Line Voltage     120VAC ± 10% ESD Safe UL and cUL listed DOD-STD-2000, MIL-S-2000, MIL-S-45743, W-S-6536, W-S-570 and DOD-STD-1686

Directions

Similar products from Solering & Desoldering Stations & Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies