This is a used CANOGA PERKINS EDGE ACCESS 2361 T1 FIBER OPTIC MODEM for sale. It was recently purchased from a very prominent US Government Laboratory just after it was replaced with new equipment. It powers up when plugged in but beyond that there has been no further testing of this unit. This item is being SOLD AS IS, with no further warranty. The EdgeAccess® Canoga Perkins 2361 T1 fiber optic modem is G.703 compliant . It is a microprocessor-based T1 fiber modem that supports the standard speed of 1.544Mbps, for AMI and B8ZS bipolar line codes. Optically Extends T1 up to 100km ITU G.703, G.824 Compliant 850nm Multimode, 1310nm/1550nm Single Mode Optics Transparent to AMI and B8ZS Line Codes; Passes Bipolar Violations Hot-swappable Main Module, ELIMs and OLIMs Local and Remote Loopbacks Redundancy Options End-to-End Side-band Management Management Support for Local and Remote Terminal, SLIP, PPP, and SNMP Diagnostic LEDs, V.54 Compliant Loopbacks Continuous End-to-end Self-test Dry Contact Input and Output Alarms The Canoga Perkins 2361 is a G.703 compliant T1 fiber optic modem. It is a microprocessor-based modem that supports the standard speed of 1.544Mbps, providing a transparent fiber optic link extension for AMI and B8ZS bipolar line codes. The Canoga Perkins 2361 is modular in design for flexibility and serviceability. It is composed of three modules: Main Module, Electrical Line Interface Module (ELIM), and Optical Line Interface Module (OLIM). It is available as a standalone unit or a rackmount module for installation in a Canoga Perkins EdgeAccess® Universal Chassis System (UCS). The UCS1000 Chassis provides capacity for up to 15 rackmount modems. Refer to the UCS1000 product line data sheet for details on available features. Full configuration and management for both ends are accomplished via a local terminal. Using the UCS Domain Manager, menu driven, user-friendly screens provide end-to-end configuration, status and control of the link. Full modem redundancy options are available to provide backup of critical circuits. The redundant modem connects the hardware together, each with its own fiber path, they become fully redundant. Failure in the primary modem will cause an automatic switchover. The standalone version comes in a compact enclosure for desktop, shelf, rack, or wall mount installations. It has a built-in AC or DC power supply and utilizes the same ELIMs and OLIMs as the rackmount version. The EdgeAccess® Model 2361 is a SNMP managed multifeatured fiber optic modem that optically extends T-1 (1.544 Mbps) and E-1 (2.048 Mbps) over single mode or multimode fiber optic cable. It is a microprocessor based modem and is ANSI and ITU G.703 complaint. The 2361 is designed to expand capabilities of data communications infrastructure for cryptographic, security and satellite downlink, telephony and other applications. Remote management of the T-1 or E-1 communication link allows services to be deployed for maximum flexibility of communications and C3 assets for mission critical applications. The 2361 is modular in design for flexibility and serviceability. It is comprised of three modules: Main Module, Electrical Line Interface (ELIM), and Optical Line Interface (OLIM), all are hot swappable. It is transparent to line coding and transports AMI and B8ZS, D4, ESF and unframed data streams. The Main module is available in rack mount and standalone versions. The Standalone version is disk/shelf mount and has optional wall mount and rack mount brackets. The rackmount version mounts in the UCS1000 Chassis, providing capacity for up to 15 modems. To reduce circuit down time and increase available of mission critical applications, full modem fiber redundancy including fiber path protection is available. Failure of the on-line fiber or modem causes automatic switchover to the off-line modem and fiber facility. An integral RS-232 port on the modem provides a menu driven management interface. SNMP interface is provided via the UCS1000 Platform and the standalone version, providing end-to-end monitoring and configuration. CanogaView Smart Element Manager, a GUI based manager, supports the 2361. DIAGNOSTIC LEDs Status (STA), Configuration (CFG), Composite Loss of Sync (CLS), Test/Loopback (TST), Loss Of Sync (LOS), Local Pattern String Optical Signal Quality Level (SQL) SWITCHES Recessed Reset (Standalone and Rackmount) Loopback and Console (Standalone) ALARMS Dry Contact Output and Alarm Input (Both) Alarm Input (Standalone) REDUNDANCY Full Modem PHYSICAL Dimensions Standalone 1.7"H x 8.5"W x 11.5"D (44 x 215 x 292mm) Rackmount 1.0"H x 7.9"W x 10.4"D (25 x 201x 264mm) Weight Standalone 3.2 lb (1.45kg) Rackmount 1.2 lb (0.54kg) POWER Standalone 90 to 275VAC, 47 to 63Hz Autoranging, 7W Max 38 to 72VDC, 7W Max. Rackmount 10W Max. (See UCS 1000 Specifications) OPERATING ENVIRONMENT Temperature 0° to 50°C Humidity Up to 95% (Noncondensing) ELECTRICAL CONNECTORS AND IMPEDANCE RJ-48 Interface 100 ohm Balanced DA-15 Interface 100 ohm Balanced Input Sensitivity -6dB Output Signal Level 100 ohm 6V pp+10% (per G OPTICAL INTERFACE CONNECTORS ST with 850nm LED ST, SC, FC/PC with 1310nm/1550nm Laser PERFORMANCE Composite Error Rate ?10-10 MANAGEMENT Local Terminal (VT100) SNMP Through Dial-in (Optional for Standalone) SNMP Through UCS for Rackmount TEST FUNCTIONS Local Loopback, Remote Loopback, Remote Loopback with BERT, Bi-directional Loopback, Continuous Self-test DISTANCE GUIDE Managed Rackmount modem for UCS 1000 or UCS 1001 2361-20-xx-011-0 850nm, LED, MM, 16dB, ST, Includes Single Tx/Rx OLIM and ELIM 2361-20-xx-02x-0 1310nm Laser, SM/MM*, 17dB, Includes Single Tx/Rx OLIM and ELIM 2361-20-xx-03x-0 1310nm Laser, SM/MM*, 26dB, Includes Single Tx/Rx OLIM and ELIM 2361-20-xx-04x-0 1550nm Laser, SM, 26dB, Includes Single Tx/Rx OLIM and ELIM Optical Connector Type 1-ST 2-FC/PC 4-SC simplex Electrical Connector Type 01-DA15 02-RJ48 Managed Rackmount Modem for UCS 1000 or UCS 1001, Modem Redundancy 2361-22-xx-011-0 850nm, LED, MM, 16dB, ST, Includes 2 x 2361 Rackmount Modems, 2 x OLIMs, 2 x ELIMs, 1 x Y cable (Depends on Electrical Connector Type) 2361-22-xx-02x-0 1310nm Laser, SM/MM*, 17dB, Includes 2 x 2361 Rackmount Modems, 2 x OLIMs, 2 x ELIMs, 1 x Y cable (Depends on Electrical Connector Type) 2361-22-xx-03x-0 1310nm Laser, SM/MM*, 26dB, Includes 2 x 2361 Rackmount Modems, 2 x OLIMs, 2 x ELIMs, 1 x Y cable (Depends on Electrical Connector Type)
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
