+ Post new Ad
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 0
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 1
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 2
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 3
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 4
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 5
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 6
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 7
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 8
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 9
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 0
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 1
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 2
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 3
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 4
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 5
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 6
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 7
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 8
CEHISA EDGEBANDER SERIES 200 MODEL 202, US $7,500.00 – Picture 9

Cehisa Edgebander Series 200 Model 202

US $7,500.00

  • Nazareth, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
GOOD WORKING CONDITIONS, PRE-OWNED CEHISA EDGEBANDER SERIES 200 MODEL 202 , SERIAL # 362, MADE IN SPAIN. COMPLETE OF INSTRUCTION MANUAL AND SCHEMATICS INDIPENDENT FRONT AND END 45 DEGREE CUT OFF SAWS, TOP AND BOTTOM TRIMMERS. ANTI NOISE CABIN The machine is stored in Hudson, NY . Ready for immediate delivery PARTS AND SERVICE AVAILABLE IN USA For more information call 610-614-1205   READY TO WORK FOR PRODUCTION   Note : installation and training (if required)  in the following States : NY - PA - NJ - CT - DE  = $ 500.00 flat rate For the other States , please contact us
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “GOOD WORKING CONDITIONS, PRE-OWNED CEHISA EDGEBANDER SERIES 200 MODEL 202 , SERIAL # 362, MADE IN SPAIN.”

Directions

Similar products from Other Woodworking Equipment & Machines

Ekstrom-Carlson 156 overhead router reconditioned, Rare Single phase Howell Mtr

Ekstrom-Carlson 156 overhead router reconditioned, Rare Single phase Howell Mtr

  • DeKalb, Illinois, United States
  • Jan 30th
FRAMING CLAMP FOR FURNITURE FRAMES

FRAMING CLAMP FOR FURNITURE FRAMES

  • Sophia, North Carolina, United States
  • Jan 30th
DELTA ROCKWELL 10" UNISAW .01 START LOW RESERVE!!!!!

DELTA ROCKWELL 10" UNISAW .01 START LOW RESERVE!!!!!

  • Sarasota, Florida, United States
  • Jan 30th
2 Delta Rockwell Table Saw Extension Wings, Aluminum. 10" x 27"

2 Delta Rockwell Table Saw Extension Wings, Aluminum. 10" x 27"

  • Cathlamet, Washington, United States
  • Jan 30th
Vintage Delta Rockwell 6" Jointer Chip Chute

Vintage Delta Rockwell 6" Jointer Chip Chute

  • Rosburg, Washington, United States
  • Jan 30th
Holz Her 1435 SE Edgebander

Holz Her 1435 SE Edgebander

  • Valley City, Ohio, United States
  • Jan 30th
Moulder, molder, weinig ,wadkin ,scmi,Leadermac,IIda,

Moulder, molder, weinig ,wadkin ,scmi,Leadermac,IIda,

  • Evansville, Indiana, United States
  • Jan 30th
ADWOOD CORP EC-24 6-95 1041 CUTTER & EDGEBANDER 1-35 95 180

ADWOOD CORP EC-24 6-95 1041 CUTTER & EDGEBANDER 1-35 95 180

  • Friendship, Wisconsin, United States
  • Jan 30th
sink removal router

sink removal router

  • Nashville, Tennessee, United States
  • Jan 30th
Delta Invicta TI-14 Tilting Spindle Shaper w/ Maggi Steff 4-Roll Power Feeder

Delta Invicta TI-14 Tilting Spindle Shaper w/ Maggi Steff 4-Roll Power Feeder

  • Stone Mountain, Georgia, United States
  • Jan 30th
Oliver Auxiliary Fence Face Approx 4" X 40" Metal and Aluminum

Oliver Auxiliary Fence Face Approx 4" X 40" Metal and Aluminum

  • Guntersville, Alabama, United States
  • Jan 30th
Boy 80M Horizontal Injection (1995)

Boy 80M Horizontal Injection (1995)

  • Watertown, Connecticut, United States
  • Jan 30th
NORTHFIELD 24HD 24" Heavy Duty Jointer

NORTHFIELD 24HD 24" Heavy Duty Jointer

  • Oxford, Pennsylvania, United States
  • Jan 30th
Clarkes Abort Gate- CM-34

Clarkes Abort Gate- CM-34

  • Toledo, Washington, United States
  • Jan 30th
OLIVER 299-D 24" Heavy Duty Planer (Woodworking Machinery)

OLIVER 299-D 24" Heavy Duty Planer (Woodworking Machinery)

  • Placentia, California, United States
  • Jan 30th
1996 ALTENDORF F-45 Elmo 3 Sliding Table Saw (Woodworking Machinery)

1996 ALTENDORF F-45 Elmo 3 Sliding Table Saw (Woodworking Machinery)

  • Placentia, California, United States
  • Jan 30th
1996 PETERSON GRINDER HC 4400-B CAT 3512 5193 HOURS

1996 PETERSON GRINDER HC 4400-B CAT 3512 5193 HOURS

  • Sutherlin, Oregon, United States
  • Jan 30th
3/4" SHAPER SPINDLE FOR ROCKWELL / DELTA HEAVY DUTY

3/4" SHAPER SPINDLE FOR ROCKWELL / DELTA HEAVY DUTY

  • Alpharetta, Georgia, United States
  • Jan 30th
VIRUTEX EB 25 Edgebander - EXCELLENT CONDITION

VIRUTEX EB 25 Edgebander - EXCELLENT CONDITION

  • Van Nuys, California, United States
  • Jan 30th
Casadei Edgebander With Phase Converter K 20/10 I

Casadei Edgebander With Phase Converter K 20/10 I

  • Floral Park, New York, United States
  • Jan 30th

People who viewed this item also vieved

Antique Brass Gas Caps Velvac 68g-3 And Others

Antique Brass Gas Caps Velvac 68g-3 And Others

  • Virginia Beach, Virginia, United States
  • May 28th
Delta 14 in. Radial arm saw

Delta 14 in. Radial arm saw

  • Princeton, Kentucky, United States
  • May 28th
walker turner radial arm saw head

walker turner radial arm saw head

  • Greenfield, Indiana, United States
  • May 28th
10 Pack Mirka Abranet 6 in Grip Mesh Dust Free Sanding Disc 9A-241-220B 220 Grit

10 Pack Mirka Abranet 6 in Grip Mesh Dust Free Sanding Disc 9A-241-220B 220 Grit

  • Tampa, Florida, United States
  • May 30th
10 Pack Mirka Abranet 6 in Grip Mesh Dust Free Sanding Disc 9A-241-180B 180 Grit

10 Pack Mirka Abranet 6 in Grip Mesh Dust Free Sanding Disc 9A-241-180B 180 Grit

  • Tampa, Florida, United States
  • May 30th
10 Pack Mirka Abranet 6 in Grip Mesh Dust Free Sanding Disc 9A-241-150B 150 Grit

10 Pack Mirka Abranet 6 in Grip Mesh Dust Free Sanding Disc 9A-241-150B 150 Grit

  • Tampa, Florida, United States
  • May 30th
ROCKWELL / DELTA HANDLE / 15" DRILL PRESS PART 15-665

ROCKWELL / DELTA HANDLE / 15" DRILL PRESS PART 15-665

  • Oceanport, New Jersey, United States
  • May 30th
ROCKWELL / DELTA SPINDLE LOCK BOLT / 15" DRILL PRESS PART 15-665

ROCKWELL / DELTA SPINDLE LOCK BOLT / 15" DRILL PRESS PART 15-665

  • Oceanport, New Jersey, United States
  • May 30th
ROCKWELL / DELTA SPINDLE CLAMP/ 15" DRILL PRESS PART 15-665

ROCKWELL / DELTA SPINDLE CLAMP/ 15" DRILL PRESS PART 15-665

  • Oceanport, New Jersey, United States
  • May 30th
Over 180 CNC 3D Relief Models on Factory Sealed CD in STL DXF EPS Format NEW

Over 180 CNC 3D Relief Models on Factory Sealed CD in STL DXF EPS Format NEW

  • Sparks, Nevada, United States
  • Jun 12th
New CNC Z-Axis Set Touch Plate Probe Engraving Mach3 Router Mill Milling Tools

New CNC Z-Axis Set Touch Plate Probe Engraving Mach3 Router Mill Milling Tools

  • Hongkong, Hong Kong
  • Jun 13th
5 IN 1 STL 3d Models for CNC Router Engraver Machine Relief Artcam DECOR

5 IN 1 STL 3d Models for CNC Router Engraver Machine Relief Artcam DECOR

  • Великий Устюг, Вологодская обл., Russian Federation
  • Jun 13th
25pcs/set Mini DIY Multifunction Lathe Beads Machine Polisher Table Saw w/ Power

25pcs/set Mini DIY Multifunction Lathe Beads Machine Polisher Table Saw w/ Power

  • HK, Hong Kong
  • Oct 20th
Rockwell lathe

Rockwell lathe

  • Cannelton, Indiana, United States
  • Oct 20th
Delta Rockwell Wood Lathe Countershaft, 12" Lathe

Delta Rockwell Wood Lathe Countershaft, 12" Lathe

  • Cape Neddick, Maine, United States
  • Oct 20th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies