+ Post new Ad
Center It Drill Press V Block, US $240 – Picture 0
Center It Drill Press V Block, US $240 – Picture 0

Center It Drill Press V Block

US $240

  • Leggett, California, United States
  • Jun 25th
Open on mobile:
QR code
CENTER IT (Part # 2186) is a tool for drilling pipe and other round objects. CENTER IT is made specifically for use in a drill press. No clamping of the tube is necessary since the angled flats of the jig hold it centered. Holes will automatically be centered on the tube with no center-punching required. If tubing is too large to drill in a single operation it can simply be turned over.Especially for the metalworking enthusiast, the woodworking hobbyist, and even the professional automotive mechanic, CENTER IT makes speedy and precise work of drilling tasks. Its "hand vise" grip ridges allow no-clamp holding of round stock for sawing and cutting. CENTER IT is made of heavy aluminum extrusion. CENTER IT is 5" Long, 4" Wide, and 1-3/4" High. The groove at the base of the V is 0.43" wide, so use a drill bit smaller than this to center the CENTER IT.

Directions

Similar products from Supporting Blocks & Sets

MACHINIST TOOLS LATHE MILL Starrett # 567 V Block and Clamp with Extras in Box

MACHINIST TOOLS LATHE MILL Starrett # 567 V Block and Clamp with Extras in Box

  • Morris Plains, New Jersey, United States
  • Oct 19th
MACHINIST TOOLS LATHE MILL Faith Tool Co Super Wee Blocks V Block Set Jewelers

MACHINIST TOOLS LATHE MILL Faith Tool Co Super Wee Blocks V Block Set Jewelers

  • Morris Plains, New Jersey, United States
  • Oct 19th
MACHINISTS PRECISION SET UP GRINDING ANGLE BLOCKS, V BLOCK & PARALLEL FIXTURES

MACHINISTS PRECISION SET UP GRINDING ANGLE BLOCKS, V BLOCK & PARALLEL FIXTURES

  • Ellington, New York, United States
  • Oct 19th
Steel Step Block 1-1/2 to 2-1/2 1-1/2" Wide, Northwestern Tools 4S 4 blocks

Steel Step Block 1-1/2 to 2-1/2 1-1/2" Wide, Northwestern Tools 4S 4 blocks

  • Hamlin, New York, United States
  • Oct 19th
MACHINIST LATHE MILL Machinist Lot of Ground Toolmakers Block s for Set Up

MACHINIST LATHE MILL Machinist Lot of Ground Toolmakers Block s for Set Up

  • Morris Plains, New Jersey, United States
  • Jun 25th
MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Stud s ? for Block s

MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Stud s ? for Block s

  • Morris Plains, New Jersey, United States
  • Jun 25th
MACHINIST TOOLS LATHE MILL Machinist Lot of 2 V Block s and Clamp

MACHINIST TOOLS LATHE MILL Machinist Lot of 2 V Block s and Clamp

  • Morris Plains, New Jersey, United States
  • Jun 25th
MACHINIST TOOLS LATHE MILL Machinist Lot of Nice Ground Parallel Block s erfd

MACHINIST TOOLS LATHE MILL Machinist Lot of Nice Ground Parallel Block s erfd

  • Morris Plains, New Jersey, United States
  • Jun 25th
BROWN & SHARPE V BLOCKS/CLAMPS MATCHED PAIR 750-B NO. 34

BROWN & SHARPE V BLOCKS/CLAMPS MATCHED PAIR 750-B NO. 34

  • Arlington, Texas, United States
  • Jun 25th
Vintage Lot Of 2 Lathe Cut Off Blade Tool Holder Atlas Logan Southbend Craftsman

Vintage Lot Of 2 Lathe Cut Off Blade Tool Holder Atlas Logan Southbend Craftsman

  • Conway, New Hampshire, United States
  • Jun 25th
SET of 2 BROWN & SHARPE 750B V BLOCKS, NO. 10 With CLAMPS, Metal Lathe Tools

SET of 2 BROWN & SHARPE 750B V BLOCKS, NO. 10 With CLAMPS, Metal Lathe Tools

  • Concord, New Hampshire, United States
  • Jun 25th
Vintage L S Starrett V Block & clamp # 567 work hold machinist tool

Vintage L S Starrett V Block & clamp # 567 work hold machinist tool

  • Elgin, Illinois, United States
  • Jun 25th
ASSORTMENT OF ENCO TE-CO TIETZMANN STEP BLOCKS & HOLD DOWNS

ASSORTMENT OF ENCO TE-CO TIETZMANN STEP BLOCKS & HOLD DOWNS

  • Los Gatos, California, United States
  • Jun 25th
Two used 1-2-3 blocks

Two used 1-2-3 blocks

  • Pomona, California, United States
  • Jun 25th
2 MATCHED BROWN & SHARPE V-BLOCKS & CLAMPS No. 750 B No. 50 machinist tools *18

2 MATCHED BROWN & SHARPE V-BLOCKS & CLAMPS No. 750 B No. 50 machinist tools *18

  • Thomaston, Connecticut, United States
  • Jun 25th
VINTAGE BROWN & SHARPE PERMANENT MAGNET BLOCK With Grid, 255, NR!

VINTAGE BROWN & SHARPE PERMANENT MAGNET BLOCK With Grid, 255, NR!

  • Belmont, Massachusetts, United States
  • Jun 23rd
NEW 6PC ADJUSTABLE PARALLEL NEW SET 3/8" - 2-1/4"

NEW 6PC ADJUSTABLE PARALLEL NEW SET 3/8" - 2-1/4"

  • Tonawanda, New York, United States
  • Jun 23rd
4-3/8 X 2-3/8 X 1-1/8" SINGLE MAGNETIC V-BLOCK (3402-0007)

4-3/8 X 2-3/8 X 1-1/8" SINGLE MAGNETIC V-BLOCK (3402-0007)

  • Chino, California, United States
  • Jun 23rd
2 PIECE 4 X 2 X 1 INCH MAGNETIC PARALLEL SET (3402-0009)

2 PIECE 4 X 2 X 1 INCH MAGNETIC PARALLEL SET (3402-0009)

  • Chino, California, United States
  • Jun 23rd
2 X 2-3/8 X 1-7/8" MATCHED MAGNETIC V-BLOCK SET (3402-0006)

2 X 2-3/8 X 1-7/8" MATCHED MAGNETIC V-BLOCK SET (3402-0006)

  • Chino, California, United States
  • Jun 23rd

People who viewed this item also vieved

Craftsman 109 lathe live center

Craftsman 109 lathe live center

  • Spring Hill, Kansas, United States
  • Jan 30th
10" Lathe Headstock Dead Center Faceplate w/Dog Slot + D1-8 Camlock Mount

10" Lathe Headstock Dead Center Faceplate w/Dog Slot + D1-8 Camlock Mount

  • Middlebury, Indiana, United States
  • Jan 30th
ROYAL Spring Type Live Center - Overall Length : 5-15/16" Taper: 4 MT

ROYAL Spring Type Live Center - Overall Length : 5-15/16" Taper: 4 MT

  • Flushing, New York, United States
  • Jan 30th
ER32 SPRING COLLET NUT SAFETY WRENCH CNC MILLING LATHE TOOL & WORKHOLDING #A47

ER32 SPRING COLLET NUT SAFETY WRENCH CNC MILLING LATHE TOOL & WORKHOLDING #A47

  • Hong Kong, Hong Kong
  • Jan 30th
ER32 32MM STRAIGHT SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #G06

ER32 32MM STRAIGHT SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #G06

  • Hong Kong, Hong Kong
  • Jan 30th
ER40 BT50 M24 150L COLLET CHUCK CNC MILLING TOOLHOLDING MACHINIST ENGINEER #L129

ER40 BT50 M24 150L COLLET CHUCK CNC MILLING TOOLHOLDING MACHINIST ENGINEER #L129

  • Hong Kong, Hong Kong
  • Jan 30th
DE-STA-CO 441 Clamp, NPM 54410, New In Bag

DE-STA-CO 441 Clamp, NPM 54410, New In Bag

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO 210-TU Clamp, 210-TU, NPM 52102, New In Bag

DE-STA-CO 210-TU Clamp, 210-TU, NPM 52102, New In Bag

  • Warren, Michigan, United States
  • Jan 30th
70932, De-Sta-Co, Hydraulic Hose, New Old Stock

70932, De-Sta-Co, Hydraulic Hose, New Old Stock

  • Warren, Michigan, United States
  • Jan 30th
Collet Assembly DRYL1723

Collet Assembly DRYL1723

  • Glassboro, New Jersey, United States
  • Jan 30th
USED ERICKSON CAT45 x DA200 x 5.50" Gage COLLET CHUCK CAT-45 x DA-200

USED ERICKSON CAT45 x DA200 x 5.50" Gage COLLET CHUCK CAT-45 x DA-200

  • Fairfield, Iowa, United States
  • Jan 30th
R8 Bridgeport ER40 Chuck+23 PCs ER40 Collets+Spanner

R8 Bridgeport ER40 Chuck+23 PCs ER40 Collets+Spanner

  • Vancouver, Washington, United States
  • Jan 30th
LOT OF SCHAUBLIN W-12 THREE MM MODEL 70 LATHE COLLETS

LOT OF SCHAUBLIN W-12 THREE MM MODEL 70 LATHE COLLETS

  • Southington, Connecticut, United States
  • Jan 30th
Hardinge 16C 1-3/4" step collet

Hardinge 16C 1-3/4" step collet

  • Fall River, Massachusetts, United States
  • Jan 30th
LOT OF 9 SCHAUBLIN W-12 TWO MM MODEL 70 LATHE COLLETS

LOT OF 9 SCHAUBLIN W-12 TWO MM MODEL 70 LATHE COLLETS

  • Southington, Connecticut, United States
  • Jan 30th
Challenge Universal Right Angle Iron (Inv.29986)

Challenge Universal Right Angle Iron (Inv.29986)

  • Portland, Connecticut, United States
  • Jan 30th
Angle plate 7" x 10.5" x 7"

Angle plate 7" x 10.5" x 7"

  • Montebello, California, United States
  • Jan 30th
1/8" Parallel Set - 10 Pair

1/8" Parallel Set - 10 Pair

  • Duluth, Georgia, United States
  • Jan 30th
Lot of 2 Disco LELH-910004-0 Kurashiki Kako HI-MOUNT KM-100-HL Leveling Block

Lot of 2 Disco LELH-910004-0 Kurashiki Kako HI-MOUNT KM-100-HL Leveling Block

  • Morgan Hill, California, United States
  • Jan 30th
Sunstrand 922-300 3-1/4"L X 1-1/2"W 2-1/4"W X 1-3/4"H Dog

Sunstrand 922-300 3-1/4"L X 1-1/2"W 2-1/4"W X 1-3/4"H Dog

  • Peoria, Illinois, United States
  • Jan 30th
carbide seratted gripper for machine fixture work holding 3/4-16 x 1 threaded

carbide seratted gripper for machine fixture work holding 3/4-16 x 1 threaded

  • Warren, Michigan, United States
  • Jan 30th
PHASE II 6"Horizontal Rotary Table

PHASE II 6"Horizontal Rotary Table

  • Flushing, New York, United States
  • Jan 30th
Troyke 15 Inch Rotary Table, Inv 6062

Troyke 15 Inch Rotary Table, Inv 6062

  • Portland, Connecticut, United States
  • Jan 30th
Tilting Table 23 inch X 30 inch Number 2344-30160, Inv 6966

Tilting Table 23 inch X 30 inch Number 2344-30160, Inv 6966

  • Portland, Connecticut, United States
  • Jan 30th
Wheeler-Rex 13020 2" Hinged Pipe Vise

Wheeler-Rex 13020 2" Hinged Pipe Vise

  • Wayland, Michigan, United States
  • Jan 30th
Yankee 4" Drill Press Vise; model 994

Yankee 4" Drill Press Vise; model 994

  • Sicklerville, New Jersey, United States
  • Jan 30th
Palmgren milling vise Model: 9626603 6.125 wide kurt usa list $390.00 new

Palmgren milling vise Model: 9626603 6.125 wide kurt usa list $390.00 new

  • Denver, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies