+ Post new Ad
Cincinnati Bickford Radial Drill Press 4' arm x 9" column w / Tap Control, US $1800 – Picture 0
Cincinnati Bickford Radial Drill Press 4' arm x 9" column w / Tap Control, US $1800 – Picture 0

Cincinnati Bickford Radial Drill Press 4' Arm X 9" Column W / Tap Control

US $1800

  • Johnson City, Tennessee, United States
  • Jun 6th
Open on mobile:
QR code
 This is a very nice Cincinnati Bickford "Super Service" radial drill press with a 4' arm x 9" diameter column. It is 220/440vt and is currently wired for 220vt. 3 phase power. It has  9 speeds 75-1500 rpm. and a #4 Mt. spindle. It has "tap control" feature which allows one hand control of the spindle rotational direction and quill up or down with what looks a lot like a motorcycle throttle.The head of this machine was disassembled and all bearings and bronze/brass bushings were replaced and it is in tip top condtion. It has been used under 100 hours since It has a coolant system, power elevation and lowering of the head, .and a box table. You are welcome to come inspect under power. Look close and ask any questions you have..

Directions

Similar products from Tools for Drilling & Tapping Equipment

ACME 4-40 MS51830-102, Threaded Inserts

ACME 4-40 MS51830-102, Threaded Inserts

  • Abingdon, Maryland, United States
  • Jun 6th
T.M. SMITH 3/8" EXTENSION TAP ADAPTER FOR 3/8" TAP

T.M. SMITH 3/8" EXTENSION TAP ADAPTER FOR 3/8" TAP

  • Cadiz, Kentucky, United States
  • Jun 6th
Helicoil 5543-10 Thread Repair Kit, M10 x 1.25 Metric Thread Kit

Helicoil 5543-10 Thread Repair Kit, M10 x 1.25 Metric Thread Kit

  • Conway, Arkansas, United States
  • Jun 6th
NEW ATI by Snap On 1/4" Nutplate Drill Jig AT518K-1/4" Aircraft Tool

NEW ATI by Snap On 1/4" Nutplate Drill Jig AT518K-1/4" Aircraft Tool

  • Scituate, Massachusetts, United States
  • Jun 6th
Helicoil Thread Inserts 1/4-20 x.375 New 9 Inserts

Helicoil Thread Inserts 1/4-20 x.375 New 9 Inserts

  • Wellington, Ohio, United States
  • Jun 6th
Kennametal 17mm Carbide Drill

Kennametal 17mm Carbide Drill

  • Holland, New York, United States
  • Jun 6th
VALENITE S.P.V. TENSION COMPRESSION TAP CHUCK CGS-24 STK 6651

VALENITE S.P.V. TENSION COMPRESSION TAP CHUCK CGS-24 STK 6651

  • Wadley, Alabama, United States
  • Jun 6th
Hougen Industrial Rotabroach 1-5/16 X 2 X 3/4 Shank 42042

Hougen Industrial Rotabroach 1-5/16 X 2 X 3/4 Shank 42042

  • Jonesville, South Carolina, United States
  • Jun 6th
Taper Hand Tap 3/8-16 H3 4FL Titan #TT90422

Taper Hand Tap 3/8-16 H3 4FL Titan #TT90422

  • Dover-Foxcroft, Maine, United States
  • Jun 6th
HeliCoil Thread Repair Inserts Refill Metric 12 X 1.75 X 12 - Quantity 22 - New

HeliCoil Thread Repair Inserts Refill Metric 12 X 1.75 X 12 - Quantity 22 - New

  • Rockford, Illinois, United States
  • Jun 6th
TAPMATIC RX70 REVERSIBLE TAPPING HEAD, M5-M18, #10-3/4, 1200 RPM, #3JT

TAPMATIC RX70 REVERSIBLE TAPPING HEAD, M5-M18, #10-3/4, 1200 RPM, #3JT

  • Fremont, California, United States
  • Jun 5th
TAPMATIC RX70 REVERSIBLE TAPPING HEAD, M5-M18, #10-3/4, 1200 RPM, 7/8-20

TAPMATIC RX70 REVERSIBLE TAPPING HEAD, M5-M18, #10-3/4, 1200 RPM, 7/8-20

  • Fremont, California, United States
  • Jun 5th
2 Snow Drilling Tapping Machines sold for parts or repair.

2 Snow Drilling Tapping Machines sold for parts or repair.

  • DeKalb, Illinois, United States
  • Jun 5th
Machinist tool 1/4 - 28 tool

Machinist tool 1/4 - 28 tool

  • Neosho, Missouri, United States
  • Jun 5th
Large Assortment Rutland Thread Repair Key lock 8-32 to 1"-12 Stainless & Carbon

Large Assortment Rutland Thread Repair Key lock 8-32 to 1"-12 Stainless & Carbon

  • Kansas City, Missouri, United States
  • Jun 5th
Aro self feed drill dual spindle head spindle assembly

Aro self feed drill dual spindle head spindle assembly

  • Niles, Michigan, United States
  • Jun 5th
lot of Aro self feed drill control blocks

lot of Aro self feed drill control blocks

  • Niles, Michigan, United States
  • Jun 5th
LOT OF 7 HSS DIES 9/16-18NF TO 1"-14UNF W/ 22-3/8" DIE WRENCH BUTTERFILED MORSE

LOT OF 7 HSS DIES 9/16-18NF TO 1"-14UNF W/ 22-3/8" DIE WRENCH BUTTERFILED MORSE

  • Ellington, New York, United States
  • Jun 5th
AUTAL NO A12 GERMAN MADE TAPPING ATTACHMENT W/ 2 MT SHANK

AUTAL NO A12 GERMAN MADE TAPPING ATTACHMENT W/ 2 MT SHANK

  • Ellington, New York, United States
  • Jun 5th
PROCUNIER SIZE 1 STYLE E TAPPING ATTACHMENT W/ 2MT & 1/2" SHANK

PROCUNIER SIZE 1 STYLE E TAPPING ATTACHMENT W/ 2MT & 1/2" SHANK

  • Ellington, New York, United States
  • Jun 5th

People who viewed this item also vieved

GEOMETRIC 7/16"-24 MILLED CHASERS FOR 1" D, DS,DSA, 5 HOOK, 22 CHAMFER

GEOMETRIC 7/16"-24 MILLED CHASERS FOR 1" D, DS,DSA, 5 HOOK, 22 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC 7/16"-20 MILLED CHASERS FOR 1" D, DS,DSA, 10 HOOK, 33 CHAMFER

GEOMETRIC 7/16"-20 MILLED CHASERS FOR 1" D, DS,DSA, 10 HOOK, 33 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC 7/16"-20 MILLED CHASERS FOR 1" D, DS,DSA

GEOMETRIC 7/16"-20 MILLED CHASERS FOR 1" D, DS,DSA

  • Fox Lake, Illinois, United States
  • Jan 30th
MITSUBISHI EDM FLUSH CUPS FOR OEM # S344 UPPER DWC90H1

MITSUBISHI EDM FLUSH CUPS FOR OEM # S344 UPPER DWC90H1

  • Mundelein, Illinois, United States
  • Jan 30th
SODICK EDM FLUSH CUPS OEM#3081606 UP. 10MM ID .623" THD

SODICK EDM FLUSH CUPS OEM#3081606 UP. 10MM ID .623" THD

  • Mundelein, Illinois, United States
  • Jan 30th
MITSUBISHI EDM FLUSH CUPS OEM # M728 UPPER/4MM/DWC90H1

MITSUBISHI EDM FLUSH CUPS OEM # M728 UPPER/4MM/DWC90H1

  • Mundelein, Illinois, United States
  • Jan 30th
6" x 6" x 1/2" Hill Acme Hydraulic Ironworker, No. 6, 95 Ton, 24" Throat (24604)

6" x 6" x 1/2" Hill Acme Hydraulic Ironworker, No. 6, 95 Ton, 24" Throat (24604)

  • Cincinnati, Ohio, United States
  • Jan 30th
10' x 15/64" Bertsch Power Bending Roll 5 HP (22461)

10' x 15/64" Bertsch Power Bending Roll 5 HP (22461)

  • Cincinnati, Ohio, United States
  • Jan 30th
NIAGARA No. 180 Power 14 Ga. Capacity 12" Throat Tooling (27184)

NIAGARA No. 180 Power 14 Ga. Capacity 12" Throat Tooling (27184)

  • Cincinnati, Ohio, United States
  • Jan 30th
1pc MB2000 Aluminum Blue Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29092

1pc MB2000 Aluminum Blue Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29092

  • Seminole, Florida, United States
  • Jan 30th
1pc MB2000 Aluminum Green Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29159

1pc MB2000 Aluminum Green Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29159

  • Seminole, Florida, United States
  • Jan 30th
1pc MB2000 Aluminum Red Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29160

1pc MB2000 Aluminum Red Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29160

  • Seminole, Florida, United States
  • Jan 30th
10" Swg 27" cc Jones & Shipman 1300 OD GRINDER, Swg around i.d., hyd. Tbl, auto

10" Swg 27" cc Jones & Shipman 1300 OD GRINDER, Swg around i.d., hyd. Tbl, auto

  • Harrison, New Jersey, United States
  • Jan 30th
Deckel SO TOOL & CUTTER GRINDER

Deckel SO TOOL & CUTTER GRINDER

  • Harrison, New Jersey, United States
  • Jan 30th
12" Swg 18" cc Kondo 450-U-H-TS OD GRINDER, I.D. ATT., HYD. Tbl, AUTO INFEED, PL

12" Swg 18" cc Kondo 450-U-H-TS OD GRINDER, I.D. ATT., HYD. Tbl, AUTO INFEED, PL

  • Harrison, New Jersey, United States
  • Jan 30th
HARDINGE SUPER SLANT SB-1H TURRET TOOL BLOCK W/ 1-1/8" BUSHING

HARDINGE SUPER SLANT SB-1H TURRET TOOL BLOCK W/ 1-1/8" BUSHING

  • Cleveland, Ohio, United States
  • Jan 30th
EA REVOLVING STOCK STOP 1-1/2" SHANK

EA REVOLVING STOCK STOP 1-1/2" SHANK

  • Cleveland, Ohio, United States
  • Jan 30th
HARDINGE B60 COLLET CLOSER CHUCK W/ COLLET A2-6 MOUNT

HARDINGE B60 COLLET CLOSER CHUCK W/ COLLET A2-6 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
16mm Round Indexable End Milling Tool Holder RPMT1003 Insert 2 Flute + 1 Key US

16mm Round Indexable End Milling Tool Holder RPMT1003 Insert 2 Flute + 1 Key US

  • HongKong, Hong Kong
  • Jan 30th
30mm Round Indexable End Milling Tool Holder RPMT1003 Insert 2 Flute + 1 Key US

30mm Round Indexable End Milling Tool Holder RPMT1003 Insert 2 Flute + 1 Key US

  • HongKong, Hong Kong
  • Jan 30th
SANDVIK CORO MILL RA790-025M25S2-16L INDEXABLE 2FL MILLING CUTTER

SANDVIK CORO MILL RA790-025M25S2-16L INDEXABLE 2FL MILLING CUTTER

  • United States
  • Jan 30th
15 ton hydraulic press head

15 ton hydraulic press head

  • Ann Arbor, Michigan, United States
  • Jan 30th
AUXILIARY CUTTER FOR ROTARY MULTISLIDE

AUXILIARY CUTTER FOR ROTARY MULTISLIDE

  • Ann Arbor, Michigan, United States
  • Jan 30th
FEEDING SYSTEM FOR HEADED BLANKS

FEEDING SYSTEM FOR HEADED BLANKS

  • Ann Arbor, Michigan, United States
  • Jan 30th
Doall Circle Attachment Parts and Pieces

Doall Circle Attachment Parts and Pieces

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Horizontal Kalamazoo Saw

Horizontal Kalamazoo Saw

  • Yaphank, New York, United States
  • Jan 30th
Cosen Model SH-460M, Horizontal Band Saw, Used

Cosen Model SH-460M, Horizontal Band Saw, Used

  • Indianapolis, Indiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies