Clamp Meter Digital Ac Multimeter New Tester Fluke Dc Voltage Rms True Amp Test, US $125.61 – Picture 0

Clamp Meter Digital Ac Multimeter New Tester Fluke Dc Voltage Rms True Amp Test, US $125.61 – Picture 1

Clamp Meter Digital Ac Multimeter New Tester Fluke Dc Voltage Rms True Amp Test

US $125.61

United States
Mar 25th

Open on mobile:
QR code

Clamp Meter Digital Ac Multimeter New Tester Fluke Dc Voltage Rms True Amp Test The Fluke 323 digital clamp meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures AC current to 400 amp. The clamp has two jaws that can close around an electrical conductor up to 30mm in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V and resistance to 40 kilohms. An audible continuity sensor confirms that the circuit conducts electricity. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The meter has a rotary switch to select the property to measure, and a four-digit LCD that shows readings. The unit operates on two AAA batteries, and it has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. It meets International Electrotechnical Commission (IEC) safety standard 61010-1 and is rated for CAT IV installations to 300V, which covers measurements at the source of the low-voltage supply such as electricity meters and overcurrent protection devices, and CAT III installations to 600V, which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply. The European Conformity (CE) marking indicates compliance with applicable European Union directives. The unit comes with a test lead set, a carrying case, and instructions. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Clamp meters, also called clamp-on meters, measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. A current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA. What's in the Box? -Fluke 323 True-RMS clamp meter -Test lead set -Soft case -Instructions Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit Audible continuity sensor confirms that the circuit conducts electricity Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V Shipping Please verify the address you registered in ebay before purchase. We are not responsible for wrong or undeliverable address. We are not responsible for any custom duty or import tax. We are not responsible for any restrict products that can't be import to your country, we will not refund you.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Fluke
MPN	Fluke 323
UPC	095969623742