Clean Room International Fan Filter Unit ., US $275.00 – Picture 0

Clean Room International Fan Filter Unit ., US $275.00 – Picture 1

Clean Room International Fan Filter Unit ., US $275.00 – Picture 2

Clean Room International Fan Filter Unit ., US $275.00 – Picture 3

Clean Room International Fan Filter Unit ., US $275.00 – Picture 4

Clean Room International Fan Filter Unit ., US $275.00 – Picture 5

Clean Room International Fan Filter Unit .

US $275.00

Alvin, Texas, United States
Feb 14th

Open on mobile:
QR code

Manufacturer information: SAM ® Fan Filter Units SAM Fan Filter Units are self-contained, motorized Supply Air Modules equipped with either HEPA or ULPA fi lters. SAM GS Units permit the removal of the HEPA or ULPA fi lters from roomside without removing the complete unit from the ceiling. GS Units feature an upstream gel channel on the fi nal fi lter which provides a leak-free seal between the fi lter and housing. SAM NCR Style fi lters can be replaced when complete unit is removed from the ceiling. SAM MicroSound units feature low noise levels and energy effi cient low watt motors. SAM MicroSound 3S units feature low noise levels and energy effi cient low watt motors with a 3-speed switch. SAM MicroWatt units feature ultra low power consumption. SAM MicroSound ECM units feature low noise levels and maintain a constant air fl ow. SAM Haz Loc units feature electrical components meeting various Class and Division requirements for hazardous locations. Key features include: • Powered by energy effi cient EBM motors. • SAM units with EBM motors are compatible with our CRI SAMlink Control System. • Four seismic clips at all corners provide strong suspension points for meeting seismic requirements. • Solid-state variable speed control with RFI suppression allows each unit to be fi ne tuned for room air fl ow requirements. • Most units are UL Listed with all electrical components UL Listed or UL Recognized. • Housings are fabricated from steel with a white powder coat finish, aluminum or stainless steel. NCR Style GS Style GS LI Style Stainless Steel HazLoc SAM is a registered trademark owned by Clean Rooms International It is easy to see why SAM is the most trusted name in a cleanroom. SAM Units Meet Your Most Exacting Cleanroom Specifications SAM 24 MicroSound Undersized Series Fan Filter Units are designed for ceiling T-Bar openings of 22”x 46”. Actual size of the units is 23-1/8”x 47-1/8”. SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned. Housings are fabricated from steel with a white powdercoat finish and include seismic clip suspension points. The energy efficient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 Volt (60 Hz). Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option. GS style units feature a polystyrene eggcrate grille in an anodized aluminum frame hinged to open, permitting removal of the filter without removing the unit from the ceiling. Optional perforated stainless steel or aluminum grilles are available. Other popular options include an 8’ power cord (115 Volt only), 99.9995% eff. ULPA grade final filter, UL 900 filters and duct collar adapters. Refer to the back of this section for more options and accessories. For horizontal flow applications consult with one of our cleanroom experts in your area, or call the factory for more information. • Energy Efficient Motor: Operating Amps Low As .6 For 277 Volt And 1.6 For 115 Volt • Safety Switch: Disables Unit While Servicing • Variable Speed Control: Allows Air Flow To Be Fine Tuned For Room Requirements NCR Style Filter Data: Size: The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Air Flow: Airflow ranges from 400 to 750 CFM for a 2 x 4 unit and 250 to 400 CFM for a 2 x 2 unit. At 90 FPM, CFM is nominal 632 on a 2 x 4 and 300 on a 2 x 2 unit respectively. Airflow for units running at 50 Hz will be about 20% less. GS Filter Data: The HEPA Filter with upstream gel channel is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger. An access port with removable plug is located in the center of the filter element face for introducing an upstream challenge or measuring static pressure. Air Flow: Airflow ranges from 340 to 640 CFM for a 2 x 4 unit and 220 to 340 CFM for a 2 x 2 unit. At 90 FPM, CFM is nominal 510 on a 2 x 4 and 220 on a 2 x 2 unit respectively. Airflow for units running at 50 Hz will be about 20% less.

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

Brand

Liberty