+ Post new Ad
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 0
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 1
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 2
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 3
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 4
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 5
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 6
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 0
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 1
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 2
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 3
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 4
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 5
CLEAN! TAPMATIC 1/2" to 1-1/8" SELF-REVERSING TAPPING HEAD ATTACHMENT - #90X, US $1900 – Picture 6

Clean! Tapmatic 1/2" To 1-1/8" Self-reversing Tapping Head Attachment - #90x

US $1900

  • Covina, California, United States
  • Jun 9th
Open on mobile:
QR code
Made in the U.S.A. by Tapmatic. This is a used Self-Reversing Torque Control Tapping Head Attachment in GREAT condition. Model #: 90X The Tapmatic 90X Retails for Over $1,800.00!! FEATURES: Self-Feed-Permits the tap to act as its own lead screw to consistently produce gauge perfect threads. Pre-Selective Torque Control- A safety device which transmits machine power to the tap and helps prevent tap breakage. 1.75 x 1 Reverse Ratio-The tap retracts 75% faster than it entered to greatly increase production. Re-entry Cushion-A cushioned drive to eliminate cross threading. Spring Biased Drive & Reverse-Provides smooth disengagement and transition from drive to reverse. Collet Chuck Spindle Nose-Jacobs rubber flex collets and back jaws adapt to all tap sizes within a unit's rated capacity. Easy Installation-A variety of tapers or thread mounts allow these attachments to adapt easily to all types of rotating machine spindles. SPECIFICATIONS: Capacity: 1/2" to 1-1/8" (M10 to M30) Maximum Speed: 600 RPM Mount Bore: #4 Jacobs Taper  Overall Length: 8-3/4" Comes exactly as shown in pictures. LOCAL PICKUP AVAILABLE!!! If you have any questions please contact Mike @ 323-202-3955 or Nick @ 323-837-8598. Thank you.

Directions

Similar products from Tools for Drilling & Tapping Equipment

Dumore 24 - 051 Automatic Drill Unit Adjustable Height Base Plate 110v Air #1

Dumore 24 - 051 Automatic Drill Unit Adjustable Height Base Plate 110v Air #1

  • Millstadt, Illinois, United States
  • Jun 9th
Dumore 24 - 051 Automatic Drill Unit Adjustable Height Base Plate 110v Air #3

Dumore 24 - 051 Automatic Drill Unit Adjustable Height Base Plate 110v Air #3

  • Millstadt, Illinois, United States
  • Jun 9th
NEW TAPMATIC 20100 TAP COLLETS (3 pieces) 117 x B1 - Expedited Shipping

NEW TAPMATIC 20100 TAP COLLETS (3 pieces) 117 x B1 - Expedited Shipping

  • Portland, Oregon, United States
  • Jun 9th
NEW TAPMATIC Tap Chuck DRIVE SPINDLE ASSEMBLY w/ 1/2" Straight Shank - Expedited

NEW TAPMATIC Tap Chuck DRIVE SPINDLE ASSEMBLY w/ 1/2" Straight Shank - Expedited

  • Portland, Oregon, United States
  • Jun 9th
SPV TK Torque Control Quick-Change Tap Adapters TK-24, TK-12, T-24. Millimeter

SPV TK Torque Control Quick-Change Tap Adapters TK-24, TK-12, T-24. Millimeter

  • Koskenkorva, default, Finland
  • Jun 9th
BT40 Floating tapping chucks SPV-Spintec 6pcs CGS-12, CGS-24 and GS-24

BT40 Floating tapping chucks SPV-Spintec 6pcs CGS-12, CGS-24 and GS-24

  • Koskenkorva, default, Finland
  • Jun 9th
Greenfield Trw Taps Assortment 19 Boxes Set

Greenfield Trw Taps Assortment 19 Boxes Set

  • Warrenton, Georgia, United States
  • Jun 9th
AAT312B KIT AVK, INSERT TOOL KIT AA112 A-T TOOL, M3 M4 M5 M6 M8

AAT312B KIT AVK, INSERT TOOL KIT AA112 A-T TOOL, M3 M4 M5 M6 M8

  • Farmingdale, New York, United States
  • Jun 9th
Geimetric Die Head 5/16DSA

Geimetric Die Head 5/16DSA

  • Hazleton, Pennsylvania, United States
  • Jun 9th
Geomertric Die Head 5/16 DSA

Geomertric Die Head 5/16 DSA

  • Hazleton, Pennsylvania, United States
  • Jun 9th
Starrett 93-C T-Handle Tap Wrench

Starrett 93-C T-Handle Tap Wrench

  • Boaz, Alabama, United States
  • Jun 9th
HILTI SF 180-A HAMMER DRILL 18V CHARGER NICD 1/2" BATTIERS PART ONLY AS IS USED

HILTI SF 180-A HAMMER DRILL 18V CHARGER NICD 1/2" BATTIERS PART ONLY AS IS USED

  • Westerville, Ohio, United States
  • Jun 9th
NUT PLATE JIG SET 220 250 #1 AIRCRAFT TOOL

NUT PLATE JIG SET 220 250 #1 AIRCRAFT TOOL

  • Citrus Heights, California, United States
  • Jun 9th
NICE! CLEVELAND 6 DRAWER DRILL / TAP CABINET +TAPS, REAMERS & COBALT, HSS DRILLS

NICE! CLEVELAND 6 DRAWER DRILL / TAP CABINET +TAPS, REAMERS & COBALT, HSS DRILLS

  • Rancho Cucamonga, California, United States
  • Jun 9th
USED ROTHFUSS TOOL CO. G-2 ANGLE DRESSER AND TOOL HOLDER

USED ROTHFUSS TOOL CO. G-2 ANGLE DRESSER AND TOOL HOLDER

  • Oxnard, California, United States
  • Jun 9th
ACCO CRAFTS #1152 TOOL CO ANGLE DRESSER TOOL HOLDER FIXTURE

ACCO CRAFTS #1152 TOOL CO ANGLE DRESSER TOOL HOLDER FIXTURE

  • Oxnard, California, United States
  • Jun 9th
USED ROTHFUSS G-2 ANGLE DRESSER AND TOOL HOLDER

USED ROTHFUSS G-2 ANGLE DRESSER AND TOOL HOLDER

  • Oxnard, California, United States
  • Jun 9th
Tapping Head; Jarvis Model 187 (CTAM #8267)

Tapping Head; Jarvis Model 187 (CTAM #8267)

  • Sicklerville, New Jersey, United States
  • Jun 9th
Iscar GTI ER ST3/4X4.0 Tap holder

Iscar GTI ER ST3/4X4.0 Tap holder

  • Syracuse, New York, United States
  • Jun 9th
Commander Multi Drill Spindle Head

Commander Multi Drill Spindle Head

  • Webster, Florida, United States
  • Jun 9th

People who viewed this item also vieved

HARDINGE 1-1/16" ROUND #22C COLLET. 12181412

HARDINGE 1-1/16" ROUND #22C COLLET. 12181412

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC TOOL CO. 3/4" THREAD CHASER DIE HEAD, 1" ALIGNING SHANK

GEOMETRIC TOOL CO. 3/4" THREAD CHASER DIE HEAD, 1" ALIGNING SHANK

  • San Diego, California, United States
  • Jan 30th
SOMMA TOOL MODEL NO. 2 FLOATING TOOL HOLDER 1" SHANK

SOMMA TOOL MODEL NO. 2 FLOATING TOOL HOLDER 1" SHANK

  • Waterbury, Connecticut, United States
  • Jan 30th
charmilles 852476 apm u v

charmilles 852476 apm u v

  • Anoka, Minnesota, United States
  • Jan 30th
COPPER TUNGSTEN SHEET .030 X 1" X 8"

COPPER TUNGSTEN SHEET .030 X 1" X 8"

  • Hudson, New York, United States
  • Jan 30th
Charmilles Andrews wire EDM parts, new and used

Charmilles Andrews wire EDM parts, new and used

  • Lewisville, Pennsylvania, United States
  • Jan 30th
LOT OF 36 STEEL LETTER AND NUMBER STAMPS A TO Z, & AND 0 TO 9 GREENFIELD

LOT OF 36 STEEL LETTER AND NUMBER STAMPS A TO Z, & AND 0 TO 9 GREENFIELD

  • Ellington, New York, United States
  • Jan 30th
Vintage Chicago Steel Dreis & Krump Manual Slitting Shear

Vintage Chicago Steel Dreis & Krump Manual Slitting Shear

  • Gilbertsville, Pennsylvania, United States
  • Jan 30th
PEXTO ROPER WHITNEY 36" PX-36 MANUAL FINGER BOX & PAN BRAKE W/ BACK GAGE & STAND

PEXTO ROPER WHITNEY 36" PX-36 MANUAL FINGER BOX & PAN BRAKE W/ BACK GAGE & STAND

  • Louisville, Kentucky, United States
  • Jan 30th
Shaviv Scrape-Burr Kit 3+1 3 Scrape Burrs & 1 Glo-Burr w/B10 Blade #90081

Shaviv Scrape-Burr Kit 3+1 3 Scrape Burrs & 1 Glo-Burr w/B10 Blade #90081

  • Seminole, Florida, United States
  • Jan 30th
Sunnen Power Hone "MAN"

Sunnen Power Hone "MAN"

  • United States
  • Jan 30th
Sunnen - M27-J83 - One Stone Set - New Old Stock -

Sunnen - M27-J83 - One Stone Set - New Old Stock -

  • Lockport, Illinois, United States
  • Jan 30th
VINTAGE STARRETT NO. 278 V BLOCK SET WITH CLAMPS MACHINIST TOOLING

VINTAGE STARRETT NO. 278 V BLOCK SET WITH CLAMPS MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
STARRETT NO. 568 SINGLE V BLOCK MACHINIST TOOLING JIG FIXTURE

STARRETT NO. 568 SINGLE V BLOCK MACHINIST TOOLING JIG FIXTURE

  • Waterford, Michigan, United States
  • Jan 30th
VINTAGE OLIVER TOOL GRINDER MODEL 585 LOGO ID NAMEPLATE

VINTAGE OLIVER TOOL GRINDER MODEL 585 LOGO ID NAMEPLATE

  • Waterford, Michigan, United States
  • Jan 30th
Hardinge Lathe Gib Screw

Hardinge Lathe Gib Screw

  • Sellersville, Pennsylvania, United States
  • Jan 30th
Delta lathe compound slide rest with dirty paper and lantern tool post holder

Delta lathe compound slide rest with dirty paper and lantern tool post holder

  • Ridgewood, New Jersey, United States
  • Jan 30th
Armstrong # 460 Spanner Wrenchs for Lathe heavy duty and in nice condition

Armstrong # 460 Spanner Wrenchs for Lathe heavy duty and in nice condition

  • Sellersville, Pennsylvania, United States
  • Jan 30th
Ingersoll face mill DN6H050R00 + 10pcs SNGU 1205ENN IN2505 Carbide Inserts

Ingersoll face mill DN6H050R00 + 10pcs SNGU 1205ENN IN2505 Carbide Inserts

  • Schweinfurt, Germany
  • Jan 30th
Wilson rockwell hardness tester anvil

Wilson rockwell hardness tester anvil

  • United States
  • Jan 30th
LMT Fette FMT87 S12-600AD 6.0" Dia 87 Deg Twincut Face Mill

LMT Fette FMT87 S12-600AD 6.0" Dia 87 Deg Twincut Face Mill

  • Barberton, Ohio, United States
  • Jan 30th
Lakeland Tube End Finishing, Flaring & Beading Machine - Used - AM7071

Lakeland Tube End Finishing, Flaring & Beading Machine - Used - AM7071

  • Cleveland, Ohio, United States
  • Jan 30th
Hi-Ton 250 Ton Capacity Hydraulic Coining Press for Coins, Medals, Medallions

Hi-Ton 250 Ton Capacity Hydraulic Coining Press for Coins, Medals, Medallions

  • Pawtucket, Rhode Island, United States
  • Jan 30th
Hartford / Bridgeport 2 HP Ram Type Vertical Turret Milling Machine w/DRO

Hartford / Bridgeport 2 HP Ram Type Vertical Turret Milling Machine w/DRO

  • Pawtucket, Rhode Island, United States
  • Jan 30th
9 X 42 BRIDGEPORT CNC VERTICAL MILL,BANDIT 3 AXIS CONTROL,TOOL CHANGER,POWER BAR

9 X 42 BRIDGEPORT CNC VERTICAL MILL,BANDIT 3 AXIS CONTROL,TOOL CHANGER,POWER BAR

  • Pinellas Park, Florida, United States
  • Jan 30th
#PNF-350A (Cobra 350AX) HYD-MECH (MEP) 14" Non-Ferrous Automatic Cold Saw (2006)

#PNF-350A (Cobra 350AX) HYD-MECH (MEP) 14" Non-Ferrous Automatic Cold Saw (2006)

  • Hauppauge, New York, United States
  • Jan 30th
Supertanium Lg. 3/8" Shank Hole Saw Arbor. Set of 3. Part #: 60343 (LW0314-3)

Supertanium Lg. 3/8" Shank Hole Saw Arbor. Set of 3. Part #: 60343 (LW0314-3)

  • Miami, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies