US $42.90
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Material | HSS |
| Helix Angle | 30 Helix | ||
| Coating | --- | ||
| Cutting Diameter | -- | ||
| End Type | Single End | ||
| Shank Diameter | -- | ||
| Brand | Controx | ||
| Overall Length | -- | ||
| Model | -- | ||
| Quantity | 2 | ||
| Flutes | 4-Flute | ||
| Country/Region of Manufacture | Germany |
Directions
Similar products from End Mills Router & Drill Bits
1/4" DIAMETER - TRW - 4 FLUTES - HSS - SQUARE CUT END MILL
NEW DOALL DOUBLE END MILL 1/2 # DC-16 W/TUBE
(2) 7/8" Carbide Four Flute Endmills NEW TC10556 MADE IN USA
Niagara Cutter HSS 3/4 2Flute EndMill
Niagara Cutter Solid Carbide 1Inch 4Flute EndMill Tialn
12x Solid Carbide 3/4"x3/4"x1-1/2"x4" 4 Flute Square Center Cutting End Mill
5/16" SGS Solid Carbide 2 Flute End Mill 30339 (M287)
UNION LONG SINGLE-END END MILL 1" DIAMETER 1" SHANK S58
MACHINIST LATHE MILL Lot of Machinist End Mills for Milling Machine Cutting a
MACHINIST LATHE MILL NICE Lot of Woodruff Key Way End Mill s Cutter
3/16" Metal Removal Solid Carbide 2 Flute End Mill (M284)
Helical 3/8" x 1-1/4" Vari. Pitch High Perf. Carbide End Mill w/C.R-SST,Titanium
5/16 x 3/8x 7/8 x 2 1/2 4 Flute Roughing End Mill Hss-Co8
Helical 1/2"x5/8" Vari. Pitch High Perf.Carbide End Mill w/CR-Stainless,Titanium
3/8 x 3/8x 7/8 x 2 1/2 4 Flute Tin Roughing End Mill Hss-Co8
Niagara Cutter TiN Coated End Mill 13mm
Helical 1/2"x1" Vari. Pitch High Perf. Carbide End Mill w/CR-Stainless,Titanium
Helical 1/2"x 1-1/4" Vari. Pitch High Perf. Carbide End Mill w/CR-Stainless,TI
3/8 x 3/8x 7/8 x 2 1/2 4 Flute Roughing End Mill Hss-Co8
People who viewed this item also vieved
Lot Of 6 High Speed KEY SEAT T-SLOT CUTTERS # 806,807,808,810 KEO, Poland&other
Linde #6Tip for cutting and welding torch
SANDVIK VBMT 110208-UF 235 30pcs
5 BOXES SANDVIK Coromant TPMT 11 02 08-UM TPMT 2(1.5)2-UM 1025
3- Reamers Machine/Hand .250” - .246” - .252” G.C.+ USA
NEW SURPLUS A-P USA .787" +/- STRAIGHT SHANK CHUCKING REAMER
WHITNEY NO.2 - HAND OPERATED PUNCH VINTAGE TOOL ANTIQUE
9pc Punch And Die Set Sheet Metal Fabrication Custom Metal Hot Rods Choppers
CNGA 4321S0625 6050 CNGA 120404S05125 6050 SANDVIK CERAMIC INSERT
WNGA-433 HSN100 GREENLEAF CERAMIC INSERTS-Last Box of 5
LOT OF 5 HSS STAGGERED TOOTH CUTTERS 2-3/4" TO 4-7/8'' W/1" MORSE CLEVELAND
LOT OF 4 HSS STRAIGHT TOOTH MILLING CUTTERS 1" &1-1/4" BORES B&S
Hougen 12272 2-1/4" x 2" Depth of Cut Rotabroach Annular Cutter
Hougen 12250 1-9/16" x 2" Depth of Cut Rotabroach Annular Cutter
1/4 3 flute counter sinks HSS 16pcs NIB
Set of 17 Solid Carbide 1°Tapered Endmills, 3 flutes, 90° Tip,
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies