+ Post new Ad
Copperhead By Hougen 9/16" X 2" Carbide Tip Annular Cutter, US $120 – Picture 0
Copperhead By Hougen 9/16" X 2" Carbide Tip Annular Cutter, US $120 – Picture 1
Copperhead By Hougen 9/16" X 2" Carbide Tip Annular Cutter, US $120 – Picture 0
Copperhead By Hougen 9/16" X 2" Carbide Tip Annular Cutter, US $120 – Picture 1

Copperhead By Hougen 9/16" X 2" Carbide Tip Annular Cutter

US $120

  • Clarksville, Tennessee, United States
  • Oct 29th
Open on mobile:
QR code
Hougen 18,000 Series 2" Depth of Cut Carbide Copperhead Annular Cutter Copperhead Carbide Tip Cutters feature a durable grade carbide insert for extended tool life when used with Hougen Mag Drills on abrasive and tough-to-cut materials. Up to three times the cutting speed of twist drills and traditional tooling like twist drills, along with a longer tool life, a more accurate hole, and a better, burr-free finish For use with Hougen Portable Magnetic Drills that require 3/4" Weldon shank Two flats for cutter mounting make for a rigid connection to you mag drill and offers twice to tool life when compared to quick change or one touch tool mounting systems Only a thin are of material touches the outside of the hole, which provides for less friction and a better hole finish Hougen-Edge tool geometry provides faster, smoother cuts with less chatter A relief are between the slug and the cutter reduces horsepower required and improves slug ejection Ground and fully fluted bits provide better chip evacuation, requires less HP and offers better performance in deeper holes Hougen has been making Rotabroach cutters since they invented them in 1974 and still makes them today, right here in the USA Most Rotabroach cutters can be resharpened, some up to 15 times depending on depth of cut and tool wear

Directions

Similar products from Other Drilling Tools

2 NEW 1-1/2" ALLIED SPADE DRILL INSERT BIT. 433T-0116 AMEC. {H910}

2 NEW 1-1/2" ALLIED SPADE DRILL INSERT BIT. 433T-0116 AMEC. {H910}

  • Mentor, Ohio, United States
  • Oct 30th
NEW LOT 9 PIECES KOMET DRILL NESTS WITH HARDWARE

NEW LOT 9 PIECES KOMET DRILL NESTS WITH HARDWARE

  • Woodstock, Illinois, United States
  • Oct 30th
B503S06000 AS3 HTS-C PILOT DRILL KENNAMETAL 1125649

B503S06000 AS3 HTS-C PILOT DRILL KENNAMETAL 1125649

  • Glendale, Arizona, United States
  • Oct 30th
12 PACK KEO 10600 Plain Type Combined Drills And Countersinks #6, 7/32"

12 PACK KEO 10600 Plain Type Combined Drills And Countersinks #6, 7/32"

  • Scandia, Kansas, United States
  • Oct 30th
Guhring GUHRING 9006600006600 Cobalt Micro Precision Drill Bit, Reinforced

Guhring GUHRING 9006600006600 Cobalt Micro Precision Drill Bit, Reinforced

  • USA, United States
  • Oct 30th
Drills /Core Drills piloted,.171-.190 x 6inch

Drills /Core Drills piloted,.171-.190 x 6inch

  • Live Oak, Florida, United States
  • Oct 30th
Vintage 1/2" Shank Silver & Deming Drills 11/16" HSS Drill Bit with Box

Vintage 1/2" Shank Silver & Deming Drills 11/16" HSS Drill Bit with Box

  • Philadelphia, Pennsylvania, United States
  • Oct 30th
AMEC SPADE & INDEXABLE DRILL 021219-4 REV 0(B0) 1272X

AMEC SPADE & INDEXABLE DRILL 021219-4 REV 0(B0) 1272X

  • Naperville, Illinois, United States
  • Oct 29th
Copperhead By Hougen 1-1/4" X 2" Carbide Tip Annular Cutter

Copperhead By Hougen 1-1/4" X 2" Carbide Tip Annular Cutter

  • Clarksville, Tennessee, United States
  • Oct 29th
Copperhead By Hougen 20 X 50mm Carbide Tip Annular Cutter

Copperhead By Hougen 20 X 50mm Carbide Tip Annular Cutter

  • Clarksville, Tennessee, United States
  • Oct 29th
Kennametal SSF200FDS561507 KPLUS Shank 5XD NG=56MM 3794910 113467798NGF4 FDS56

Kennametal SSF200FDS561507 KPLUS Shank 5XD NG=56MM 3794910 113467798NGF4 FDS56

  • Saint Peters, Missouri, United States
  • Oct 29th
Lot of 10 TRW Machinist High Speed End Mills Assorted Sizes (E)

Lot of 10 TRW Machinist High Speed End Mills Assorted Sizes (E)

  • Vinton, Virginia, United States
  • Oct 29th
CHICAGO-LATROBE 52453 Silver/Deming Drill,53/64,HSS,118 Deg

CHICAGO-LATROBE 52453 Silver/Deming Drill,53/64,HSS,118 Deg

  • Lee's Summit, Missouri, United States
  • Oct 29th
1 1/4" X 1 1/4" Long End Mills HS Steel 6 Flute SE champion #608

1 1/4" X 1 1/4" Long End Mills HS Steel 6 Flute SE champion #608

  • Philadelphia, Pennsylvania, United States
  • Oct 29th
Center Drills Assortment

Center Drills Assortment

  • West Greenwich, Rhode Island, United States
  • Oct 28th
WELDON COUNTER SINKS

WELDON COUNTER SINKS

  • West Greenwich, Rhode Island, United States
  • Oct 28th
.8438" 27/32" PREMIUM STEEL REDUCED SHANK DRILL 1/2" SHANK USA

.8438" 27/32" PREMIUM STEEL REDUCED SHANK DRILL 1/2" SHANK USA

  • Petaluma, California, United States
  • Oct 28th
AIRCRAFT TAPER ROUTER ( LOT #7 = 78 ROUTER BITS ) SEE DETAILS BELOW FOR BRAND

AIRCRAFT TAPER ROUTER ( LOT #7 = 78 ROUTER BITS ) SEE DETAILS BELOW FOR BRAND

  • TEXAS, United States
  • Oct 28th
1/8" 60 DEGREE HIGH SPEED STEEL SINGLE FLUTE COUNTERSINK 1/8" SHANK MADE IN USA

1/8" 60 DEGREE HIGH SPEED STEEL SINGLE FLUTE COUNTERSINK 1/8" SHANK MADE IN USA

  • Petaluma, California, United States
  • Oct 28th
WAUKESHA D SERIES SPADE DRILL 2050-0282-F STK4999

WAUKESHA D SERIES SPADE DRILL 2050-0282-F STK4999

  • Wadley, Alabama, United States
  • Oct 28th

People who viewed this item also vieved

WE-K2-53-2-A KUB KOMET D5055320 Kennametal Cutting Drill Drilling Insert Pocket

WE-K2-53-2-A KUB KOMET D5055320 Kennametal Cutting Drill Drilling Insert Pocket

  • Huntington Beach, California, United States
  • Jan 30th
WE-K01-38-2J KUB KOMET D5055100 Kennametal Cutting Drill Drilling Insert Pocket

WE-K01-38-2J KUB KOMET D5055100 Kennametal Cutting Drill Drilling Insert Pocket

  • Huntington Beach, California, United States
  • Jan 30th
NEW SECO CARBIDE TiALN COOLANT 8.5MM DRILL SD203A 19101 SCREW LENGTH

NEW SECO CARBIDE TiALN COOLANT 8.5MM DRILL SD203A 19101 SCREW LENGTH

  • Minneapolis, Minnesota, United States
  • Jan 30th
LOT OF 3 EXTRA LONG HSS STRAIGHT SHANK TWIST DRILL BITS 23/64x10, 25&27/64x12

LOT OF 3 EXTRA LONG HSS STRAIGHT SHANK TWIST DRILL BITS 23/64x10, 25&27/64x12

  • Pawleys Island, South Carolina, United States
  • Jan 30th
BRAND NEW EXTRA LONG HIGH QTY HSS STRAIGHT SHANK TWIST DRILL BITS 21/64X18"

BRAND NEW EXTRA LONG HIGH QTY HSS STRAIGHT SHANK TWIST DRILL BITS 21/64X18"

  • Pawleys Island, South Carolina, United States
  • Jan 30th
LOT OF 3 NEW EXTRA LONG HIGH QTY HSS STRAIGHT SHANK TWIST DRILL BIT 13/32x10""

LOT OF 3 NEW EXTRA LONG HIGH QTY HSS STRAIGHT SHANK TWIST DRILL BIT 13/32x10""

  • Pawleys Island, South Carolina, United States
  • Jan 30th
Jobber Length Drills #80 HSS 118D Oxide 1/8" LOC x 3/4" OAL QTY 12 <1917>

Jobber Length Drills #80 HSS 118D Oxide 1/8" LOC x 3/4" OAL QTY 12 <1917>

  • Saint Louis, Missouri, United States
  • Jan 30th
HERTEL Jobber Length Drill Bits #9 0.1960&#034; 118 Deg HSS 3-5/8&#034; USA Qty 4 [053]

HERTEL Jobber Length Drill Bits #9 0.1960" 118 Deg HSS 3-5/8" USA Qty 4 [053]

  • Saint Louis, Missouri, United States
  • Jan 30th
Jobber Length Drill Bit #O 0.3160&#034; 118 Deg HSS Bright USA Qty 5 [053]

Jobber Length Drill Bit #O 0.3160" 118 Deg HSS Bright USA Qty 5 [053]

  • Saint Louis, Missouri, United States
  • Jan 30th
Cleveland 16019 2165TN 23/64&#034; Screw Machine Length Parabolic Drill Tin Coated

Cleveland 16019 2165TN 23/64" Screw Machine Length Parabolic Drill Tin Coated

  • Attleboro, Massachusetts, United States
  • Jan 30th
Cleveland 16016 2165TN 5/16&#034; Screw Machine Length Parabolic Drill Tin Coated

Cleveland 16016 2165TN 5/16" Screw Machine Length Parabolic Drill Tin Coated

  • Attleboro, Massachusetts, United States
  • Jan 30th
SCREW MACHINE DRILL 1/8&#034; DIAMETER 135 SPLIT PT COBALT NEW PACK OF 10 SPAIN $5.50

SCREW MACHINE DRILL 1/8" DIAMETER 135 SPLIT PT COBALT NEW PACK OF 10 SPAIN $5.50

  • North Tonawanda, New York, United States
  • Jan 30th
1.250 HELICAL Carbide Endmill 2F CR 0.190&#034; 3-1/4 x 7

1.250 HELICAL Carbide Endmill 2F CR 0.190" 3-1/4 x 7

  • Windsor, Connecticut, United States
  • Jan 30th
12MM KENNAMETAL Carbide Coolant Drill B224A12000HP KC7315

12MM KENNAMETAL Carbide Coolant Drill B224A12000HP KC7315

  • Windsor, Connecticut, United States
  • Jan 30th
8MM SANDVIK Carbide Drill 2F R840-0800-50-A1A 1220

8MM SANDVIK Carbide Drill 2F R840-0800-50-A1A 1220

  • Windsor, Connecticut, United States
  • Jan 30th
Morse cutless brass bearing 6&#034; long x 2 3/8&#034; O.D. x 1 1/2&#034; I.D.

Morse cutless brass bearing 6" long x 2 3/8" O.D. x 1 1/2" I.D.

  • Ponte Vedra, Florida, United States
  • Jan 30th
B.F. Goodrich cutless brass bearing 5&#034; long x 2&#034; O.D. x 1.5&#034; I.D.

B.F. Goodrich cutless brass bearing 5" long x 2" O.D. x 1.5" I.D.

  • Ponte Vedra, Florida, United States
  • Jan 30th
Carbide Bur 3/8 Inch Shank SL-3 Double Cut

Carbide Bur 3/8 Inch Shank SL-3 Double Cut

  • Muscle Shoals, Alabama, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies