Crest Hal-20 Gallon Floor Ultrasonic Cleaner 3-500 Watt Genesis Generators

US $2,999.99

  • San Tan Valley, Arizona, United States
  • Jan 30th
Crest HAL-20 Ultrasonic Cleaner Free Standing 20 Gallon 1500 Watt Ultrasonic Cleaner w/ 3-500 Watt Genesis Generators Parts or Repair Unit Unit Ships Freight on Pallet Crest HAL Series Ultrasonic Cleaning Systems are designed to thoroughly clean instruments prior to final disinfection and sterilization in order to ensure total removal of tissue, blood and other contaminates. Thoroughly cleaning instruments and lubricating them between uses helps to keep them functioning properly and assure surgeon efficiency. The HAL series cleaners can be used in high volume areas either in the O.R. or Central Supply to process instruments prior to final disinfection and sterilization as required. This HAL-20 Ultrasonic Cleaner is being sold for parts or repair only. Please read the entire description if you are still interested. This unit can be wired 208v or 3 Phase. It is complete including the rack, but it does have some issues. Once connected to a 208v power source, the unit does not power up as originally designed. There is power to the bus, but the main relay is not getting energized. When the relay is manually depressed, the system fires up. Release the relay and unit cuts out. Two of the 500 watt Genesis Generators function as designed, the third one blows the 8amp fuse after a few seconds. Not sure what the issue is with this generator. The two functioning generators work perfect, as shown by the disintegrated aluminum foil after about 4 minutes in the cleaner [see photos]. The dump valve also works fine once energized. The lid was opened manually by disconnecting the bar from the motor. All 4 wheels are present, but the 2 rear ones don't roll well. Specifications: Crest Ultrasonic Cleaner Model: HAL-20 Serial No: 0205-T-0149 208V/3ph-60hz-9A 208/1ph-60hz-16A 20 Gallon Tank Overall Dimensions: Floor standing Permanent Hot water connection & Drain fitting Irrigation connection for cannulated instrument cleaning Made in USA You will receive the actual unit in the photos. Please, NO RETURNS on this unit due to its rock bottom price, and it's being sold as non-working parts unit. Condition This HAL-20 Ultrasonic Cleaner is being sold for parts or repair only. Please read the entire description if you are still interested. This unit can be wired 208v or 3 Phase. It is complete including the rack, but it does have some issues. Once connected to a 208v power source, the unit does not power up as originally designed. There is power to the bus, but the main relay is not getting energized. When the relay is manually depressed, the system fires up. Release the relay and unit cuts out. Two of the 500 watt Genesis Generators function as designed, the third one blows the 8amp fuse after a few seconds. Not sure what the issue is with this generator. The two functioning generators work perfect, as shown by the disintegrated aluminum foil after about 4 minutes in the cleaner [see photos]. The dump valve also works fine once energized. The lid was opened manually by disconnecting the bar from the motor. Warranty As always, I stand behind every item I sell. If there ever is an issue with your purchase, please contact me immediately and I will make it right. No questions asked. Age The actual age of this item is unknown. Dimensions Unit: 36” x 36” x 36” Weight: 588lbs before packing Shipping Weight before packing is 588lbs for unit pictured. Pallet weight will be 640 lbs. Pallet dimensions are 36"x36"x45" tall. The freight class is 92.5. The NMFC is 133300-3 "Machine NOI" All Buyers may contact me for a shipping quote. Pickup is always welcome. located in Coolidge Arizona 85128 which is 40 miles SE of Phoenix AZ, 10 minutes off Interstate 10 All other international buyers must contact me prior to purchasing for a shipping quote and determination whether this item will ship feasibly to your country. Legal Disclaimer: Anyone may bid/buy, but it is a blanket requirement by eBay that I post the following disclaimer on all medical category auctions and sales. “The sale of this item may be subject to regulation by the United States Food and Drug Administration, as well as state and local regulatory agencies. If so, do not bid on the item unless you are an authorized purchaser. If an item is subject to FDA regulations, I will verify your status as an authorized purchaser before shipping the item”. Whitney Hernandez Medical 2745 W Gold Dust Queen Creek AZ 85123 We do our best to test every item we sell and make sure it is working. We will state the results of our testing in the description. Some equipment is not able to be tested due to power requirements and/or lack of connection cables and accessories. Our warranty covers items for 14 days after delivered. Calibration and maintenance are the responsibility of the buyer.
Condition For parts or not working :
An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the seller’s listing for full details.
Seller Notes Complete Parts Unit. See Photos and Description for Details...........................

Directions

Similar products from Cleansing Utensils

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies