Crestron Dm-md6x1 6x1 Hdmi/component Digitalmedia Switcher W/endpoints

US $510

  • Bangor, Maine, United States
  • Oct 29th
Up for grabs are a couple of decommissioned Crestron DM-MD6x1 DigitalMedia switchers.  Units were removed from a working enviroment and include one Black wallplate transmitter each and one RMC endpoint each. Any questions please ask before purchase. Payment due within 24 hours of best offer acceptance. Info below direct from Crestron's website Video   Switcher 6x1 combination digital/analog switch, Crestron QuickSwitch HD®   Input Signal Types DM CAT (DigitalMedia over shielded twisted-pair copper wire), HDMI®, DVI[1], DisplayPort Multimode[1], RGB, component (YPbPr)[2], S-Video (Y/C)[2], composite[2]   Output Signal Types DM CAT, HDMI, DVI[1]   Formats HDMI, DVI, HDCP content protection support, 3D (via DM only), RGBHV up to UXGA/WUXGA, HDTV up to 1080p60, NTSC or PAL   Input Resolutions, HDMI, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock   Input Resolutions, HDMI, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock   Input Resolutions, RGB 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz   Input Resolutions, Component 480i, 576i, 480p, 576p, 720p50, 720p60, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60   Input Resolutions, Composite and S-Video 480i, 576i   Output Resolutions Matched to inputs   Analog-To-Digital Conversion 10-bit 165 MHz per each of 3 channels Audio   Switcher 6x1 combination digital/analog switch, limited audio breakaway[4]; independent input compensation and master volume adjustment for analog output   Input Signal Types DM CAT, HDMI, DisplayPort Multimode[1], S/PDIF coaxial, analog stereo   Output Signal Types DM CAT, HDMI, analog stereo   Formats, HDMI and SPDIF Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, 2ch PCM   Formats, HDMI only Up to 8ch PCM   Formats, Analog Stereo 2-Channel   Analog-To-Digital Conversion 24-bit 48 kHz   Digital-To-Analog Conversion 24-bit 48 kHz   Volume Gain Range (analog out) -80dB to 0dB, adjustable from 0% to 100%   Input Compensation (analog out) ±10dB per input   Performance (analog) Frequency Response: 20Hz to 20kHz ±0.75dB; S/N Ratio: >90dB, 20Hz to 20kHz A-weighted; THD+N: <0.05% @ 1kHz; Stereo Separation: >90dB Communications   DigitalMedia DM CAT, DMNet, HDCP management, EDID format management, CEC   Ethernet 10BaseT/100BaseTX, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, RSTP   USB Supports USB HID class devices Ethernet Switch   Provides (1) onboard 10BaseT/100BaseTX Ethernet port, (1) internal 10BaseT/100BaseTX Ethernet port for the switcher, and (4) remote 10BaseT/100BaseTX Ethernet ports via select outboard devices Connectors   VIDEO IN 1 (3) BNC female comprising (1) auto-sensing multi-format analog video input; Signal Types: Component (YPbPr), S-Video (Y/C), or composite input; Input Level: 1 Vp-p nominal; Input Impedance: 75 Ohms nominal   RGB IN 2 (1) DB15HD female, RGB (VGA) or component (YPbPr) video input[2]; Formats: RGBHV, RGBS, RGsB, YPbPr; Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms; Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 1k Ohms   AUDIO IN 1 – 2 (2) 5-pin 3.5mm detachable terminal blocks; Balanced/unbalanced stereo line-level inputs; AUDIO IN 1 and SPDIF IN 1 inputs are mutually exclusive; Input Impedance: 24k Ohms balanced/unbalanced; Balanced Input Level: 4 Vrms maximum; Unbalanced Input Level: 2 Vrms maximum   HDMI IN 3 (1) 19-pin Type A HDMI female; HDMI digital video/audio input   SPDIF IN 1 (1) RCA female, S/PDIF coaxial digital audio input; SPDIF IN 1 and AUDIO IN 1 inputs are mutually exclusive; Input Impedance: 75 Ohms   AUDIO OUT (1) 5-pin 3.5mm detachable terminal block; Balanced/unbalanced stereo line-level output, variable level; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced   DM IN D/M 4 – 6 (3) DM CAT inputs, each composed of (2) 8-pin RJ45 female, shielded; Connect to DM CAT outputs of DM transmitters or other DM devices viaDM-CBL cable[3]   DM IN 24ABG (3) 4-pin 3.5mm detachable terminal blocks, DMNet ports; Connect to DMNet ports of DM transmitters or other DM devices via DM-CBL cable[3]   DM OUT D/M (1) DM CAT output composed of (2) 8-pin RJ45 female, shielded; Connects to DM CAT input of a DM receiver/room controller, switcher, or other DM device via DM-CBL cable[3]   DM OUT 24ABG (1) 4-pin 3.5mm detachable terminal block, DMNet port; Connects to DMNet port of a DM receiver/room controller, switcher, or other DM device via DM-CBL cable[3]   EXT PWR (1) 3-pin 3.5mm detachable terminal block, power selection port; Connects to an external power supply[5], or to the internal power source via a jumper, to power the DM devices connected to DM IN 4 – 6 and DM OUT; Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC) total for all ports when connected to external power supply[5], otherwise limited to available DMNet power (see “Power Requirements” below)   HDMI OUT (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Carries same audio and video signals as DM OUT   USB HID (1) USB Type B female; USB 1.1 device port for connection to the USB host interface of a computer or other USB HID-compliant host device   LAN (1) 8-wire RJ45 female w/2 LED indicators; 10BaseT/100BaseTX Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity   100-240V ~2.3A 50/60Hz (1) IEC C14 male chassis plug, main power input; Mates with removable power cord, included   G (1) 6-32 screw, chassis ground lug   COMPUTER (front) (1) USB Type B female; USB 1.1 computer console port (6 ft cable included) DM Cable Length   Cable Type: DM-CBLDigitalMedia Cable Maximum length per port without, between, before, or after repeaters: 200 ft (60 m) for 720p, 1080i, 1080p24 200 ft (60 m) for 1024x768 @75Hz 150 ft (45 m) for 1080p60 150 ft (45 m) for 1280x1024 @75Hz 150 ft (45 m) for 1920x1200 @60Hz 125 ft (38 m) for 1600x1200 @60Hz Maximum total length per port using up to 2 repeaters: 450 ft (137 m) for 720p, 1080i, 1080p24 450 ft (137 m) for 1024x768 @75Hz 450 ft (137 m) for 1080p60 450 ft (137 m) for 1280x1024 @75Hz 450 ft (137 m) for 1920x1200 @60Hz 375 ft (114 m) for 1600x1200 @60Hz Controls and Indicators   PWR (1) green LED, indicates operating power supplied via Main Power Input   USB HID DISABLED (1) red LED, indicates the COMPUTER port is in use causing USB HID to be disabled   RESET (1) recessed miniature pushbutton for hardware reset, reboots the switcher   SYNC (1) pushbutton and red LED, selects SYNC mode so the INPUTS LEDs indicate input signal presence   ROUTE (1) pushbutton and red LED, selects ROUTE mode to allow routing changes   INPUTS 1 – 6 (6) pushbuttons and red LEDs, select input for routing   SETUP (rear) (1) red LED and (1) miniature recessed pushbutton for Ethernet auto-discovery Power Requirements   Main Power 90 Watts @ 100-240 Volts AC, 50/60 Hz   Available DMNet Power 30 Watts (1.25 Amps @ 24 Volts DC) from internal power supply Environmental   Temperature 32° to 104°F (0° to 40°C)   Humidity 10% to 90% RH (non-condensing)   Heat Dissipation 307 BTU/Hr Enclosure   Chassis Metal with black finish, vented sides, fan-cooled   Faceplate Extruded aluminum, black finish with polycarbonate label overlay   Mounting Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions   Height 3.47 in (89 mm) without feet   Width 17.03 in (433 mm), 19.00 in (483 mm) with ears   Depth 12.21 in (310 mm) Weight   7.5 lb (3.4 kg)

Directions

Similar products from Other Presentation Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies