+ Post new Ad
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8, US $1800 – Picture 0
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8, US $1800 – Picture 1
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8, US $1800 – Picture 2
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8, US $1800 – Picture 0
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8, US $1800 – Picture 1
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8, US $1800 – Picture 2

Cushman Ref No 5340b 3 Jaw 5" Scroll Chuck 4 South Bend 9 10k Lathe 1 1/2" X 8

US $1800

  • United States
  • Mar 1st
Open on mobile:
QR code
Cushman 5" 3 jaw scroll chuck with two sets of reversing jaws.  One set is original to chuck.  I had a second set that are in mint condition, which are mounted on the chuck as shown.  Jaws move smoothly throughout range.  Chuck is stamped "THE CUSHMAN CHUCK CO. HARTFORD CONN. MADE IN UNITED STATES OF AMERICA REF. NO. 5340B".  Chuck is 2 1/4" thick.  Thread mounting diameter is 1 1/2" x 8 tpi.  Unit was acquired without key.  Threads are in good order.  All as shown.    Always combine shipping - If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture United States
Brand Cushman

Directions

Similar products from Lathe Chucks

CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

  • Toms River, New Jersey, United States
  • Mar 2nd
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

  • Houston, Texas, United States
  • Mar 2nd
6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

  • Bloomington, California, United States
  • Mar 2nd
8" 6-JAW SELF-CENTERING LATHE CHUCK w.solid jaws--0.003" TIR #K13-200---new

8" 6-JAW SELF-CENTERING LATHE CHUCK w.solid jaws--0.003" TIR #K13-200---new

  • Madison Heights, Michigan, United States
  • Mar 1st
No. 2 Bohle (German) Plain Horizontal Milling Machine

No. 2 Bohle (German) Plain Horizontal Milling Machine

  • Libertyville, Illinois, United States
  • Mar 1st
15" CNC Lathe Chuck Jaw Tools 3 T Nuts+6 Bolts 151JN

15" CNC Lathe Chuck Jaw Tools 3 T Nuts+6 Bolts 151JN

  • Columbus, Ohio, United States
  • Mar 1st
6 inch Buck chuck backplate Carroll Ellis

6 inch Buck chuck backplate Carroll Ellis

  • Kaneohe, Hawaii, United States
  • Mar 1st
Buck Accujust 8.25" Chuck w/ Hard & Soft Jaws Exlnt Used Condition Smooth Scroll

Buck Accujust 8.25" Chuck w/ Hard & Soft Jaws Exlnt Used Condition Smooth Scroll

  • Santa Monica, California, United States
  • Mar 1st
CUSHMAN 9" THREE JAW CHUCK 8TPI MACHINIST TOOL LATHE MILL

CUSHMAN 9" THREE JAW CHUCK 8TPI MACHINIST TOOL LATHE MILL

  • Lake Hiawatha, New Jersey, United States
  • Mar 1st
4 1/2" THREE JAW BUCK CHUCK MACHINIST TOOL LATHE MILL

4 1/2" THREE JAW BUCK CHUCK MACHINIST TOOL LATHE MILL

  • Lake Hiawatha, New Jersey, United States
  • Mar 1st
NEW Steelex M1057 3 Jaw Chuck 4-Inch

NEW Steelex M1057 3 Jaw Chuck 4-Inch

  • United States
  • Mar 1st
USED MACHINED CAST IRON CHUCK ADAPTER PLATE 10.00" D1-6 CAM-LOCK

USED MACHINED CAST IRON CHUCK ADAPTER PLATE 10.00" D1-6 CAM-LOCK

  • Millstadt, Illinois, United States
  • Mar 1st
15" SKINNER U.S.A. 4 JAW CHUCK L-1 MOUNT REV/JAWS LATHE CHUCK L1 TAPER ***VGC***

15" SKINNER U.S.A. 4 JAW CHUCK L-1 MOUNT REV/JAWS LATHE CHUCK L1 TAPER ***VGC***

  • Highland, New York, United States
  • Mar 1st
CUSHMAN No. 3509 9" THREE JAW CHUCK With Extra Jaws And Key.

CUSHMAN No. 3509 9" THREE JAW CHUCK With Extra Jaws And Key.

  • Suffern, New York, United States
  • Mar 1st
Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1

  • Jamestown, New York, United States
  • Mar 1st
JAW NUTS FOR CNC LATHE CHUCK 3 PCS SET T-NUTS

JAW NUTS FOR CNC LATHE CHUCK 3 PCS SET T-NUTS

  • Unionville, Connecticut, United States
  • Mar 1st
2 PC ER25 SPRING COLLET CLAMPING NUT CNC MILLING LATHE TOOL & WORKHOLDING #A87

2 PC ER25 SPRING COLLET CLAMPING NUT CNC MILLING LATHE TOOL & WORKHOLDING #A87

  • Hong Kong, Hong Kong
  • Mar 1st
5C Collet Mount 3" LATHE CHUCK by HD HHT Yama - with chuck key

5C Collet Mount 3" LATHE CHUCK by HD HHT Yama - with chuck key

  • Glendale, Arizona, United States
  • Mar 1st
Cushman 18" 4 jaw independent chuck D1-11 mount NICE!

Cushman 18" 4 jaw independent chuck D1-11 mount NICE!

  • Oxford, Pennsylvania, United States
  • Mar 1st
BISON model 5818-125 Milling Tailstock Poland Mfg. L@@K NR

BISON model 5818-125 Milling Tailstock Poland Mfg. L@@K NR

  • Lewiston, Idaho, United States
  • Mar 1st

People who viewed this item also vieved

VCFC1645 Valenite Collet 933712285

VCFC1645 Valenite Collet 933712285

  • Hendersonville, Tennessee, United States
  • Jan 30th
ER20 5.5MM Komet Collet A33530000550

ER20 5.5MM Komet Collet A33530000550

  • Hendersonville, Tennessee, United States
  • Jan 30th
VCFC1678 5/16" Valenite Coolit Collet 93-371-1380

VCFC1678 5/16" Valenite Coolit Collet 93-371-1380

  • Hendersonville, Tennessee, United States
  • Jan 30th
TSUDAKOMA MODEL RNCB-501R INDEXER AND DRIVE SYSTEM (TABLE DIA. 19.69")

TSUDAKOMA MODEL RNCB-501R INDEXER AND DRIVE SYSTEM (TABLE DIA. 19.69")

  • Fort Worth, Texas, United States
  • Jan 30th
Vintage Cincinnati Tool Co No. 540 4” C Clamp INV9991

Vintage Cincinnati Tool Co No. 540 4” C Clamp INV9991

  • Laurel, Maryland, United States
  • Jan 30th
Suburban Tool indexing face plate fixture, v block, WG1- 6 machinist tool

Suburban Tool indexing face plate fixture, v block, WG1- 6 machinist tool

  • North Street, Michigan, United States
  • Jan 30th
(3 C-CLAMPS) J.H. WILLIAMS & CO. 1 3/4", Armstrong 78-404 4.5", 1440-6" U.S.A.

(3 C-CLAMPS) J.H. WILLIAMS & CO. 1 3/4", Armstrong 78-404 4.5", 1440-6" U.S.A.

  • Trenton, New Jersey, United States
  • Feb 14th
DESTACO 607 CLAMP Detroit Stamping De Sta Co

DESTACO 607 CLAMP Detroit Stamping De Sta Co

  • Sandusky, Ohio, United States
  • Feb 14th
DESTACO 235-U HORIZONTAL TOGGLE CLAMP 235U Detroit Stamping De Sta Co

DESTACO 235-U HORIZONTAL TOGGLE CLAMP 235U Detroit Stamping De Sta Co

  • Sandusky, Ohio, United States
  • Feb 14th
VINTAGE DUNLAP #5244 BENCH VISE

VINTAGE DUNLAP #5244 BENCH VISE

  • Concord, North Carolina, United States
  • Feb 14th
Very Nice Low Profile Milling Machine etc Vise 3 1/2" wide

Very Nice Low Profile Milling Machine etc Vise 3 1/2" wide

  • Jackson, Mississippi, United States
  • Feb 14th
9 CUTTERS FOR UNIMAT SL1000/DB200 LATHE NEW!

9 CUTTERS FOR UNIMAT SL1000/DB200 LATHE NEW!

  • Millington, New Jersey, United States
  • Feb 14th
Enco # 751 Live Center w/ # 1MT / FB 9

Enco # 751 Live Center w/ # 1MT / FB 9

  • Seffner, Florida, United States
  • Feb 15th
MT6 CARBIDE TIPPED CENTER MILLING GRINDING WORKHOLDING

MT6 CARBIDE TIPPED CENTER MILLING GRINDING WORKHOLDING

  • Lombard, Illinois, United States
  • Feb 15th
Heavy 8 3/4" Long Large Live Center From Vintage Metal Lathe 1.25"-1.05" Taper

Heavy 8 3/4" Long Large Live Center From Vintage Metal Lathe 1.25"-1.05" Taper

  • Troy, Michigan, United States
  • Feb 15th
Aircraft Tools 1/8,#30 Used Wedglock/Hex nut draw Clecos,1"grip.

Aircraft Tools 1/8,#30 Used Wedglock/Hex nut draw Clecos,1"grip.

  • Perris, California, United States
  • Feb 28th
8x LOT NEW ALSTOM POWER NUT GP-2375-B 1-5/8" HEX HEAVY JAM 1-5

8x LOT NEW ALSTOM POWER NUT GP-2375-B 1-5/8" HEX HEAVY JAM 1-5

  • Old Hickory, Tennessee, United States
  • Feb 28th
Used Edward Andrews Steel Boring Bar Sleeve, 4" L, 1.5" OD, 1/2" Bore, EA48-1

Used Edward Andrews Steel Boring Bar Sleeve, 4" L, 1.5" OD, 1/2" Bore, EA48-1

  • Bristol, Connecticut, United States
  • Feb 28th
SPI - V-Blocks Type: V-Block Sold As: Matched Pair MSC Part #: 88635925

SPI - V-Blocks Type: V-Block Sold As: Matched Pair MSC Part #: 88635925

  • Sellersburg, Indiana, United States
  • May 21st
ISTEMA EDM 3R 20mm SHANK MOUNTING BLOCK FIXTURE PLATE * Machinist Toolmaker

ISTEMA EDM 3R 20mm SHANK MOUNTING BLOCK FIXTURE PLATE * Machinist Toolmaker

  • Seekonk, Massachusetts, United States
  • May 21st
machinist degree blocks milling set up 1 2 3 angle parallel Patrick standards

machinist degree blocks milling set up 1 2 3 angle parallel Patrick standards

  • Cottonwood, Arizona, United States
  • May 22nd
Cowells NOS Dividing Attachment w/Full Set of 6 Dividing Plates + 3 Blank Plates

Cowells NOS Dividing Attachment w/Full Set of 6 Dividing Plates + 3 Blank Plates

  • South Bend, Indiana, United States
  • Jun 9th
HRT210 HAAS Rotary Table 4th Axis

HRT210 HAAS Rotary Table 4th Axis

  • New Haven, Indiana, United States
  • Jun 9th
Troyke 15" rotary table model U15

Troyke 15" rotary table model U15

  • Manchester, Maryland, United States
  • Jun 10th
ALBECHT CLASSIC STAINLESS KEYLESS DRILL CHUCK

ALBECHT CLASSIC STAINLESS KEYLESS DRILL CHUCK

  • North Dartmouth, Massachusetts, United States
  • May 25th
ROYAL TOOL HOLDER. ER 32 CAT 40 PN 54126

ROYAL TOOL HOLDER. ER 32 CAT 40 PN 54126

  • North Dartmouth, Massachusetts, United States
  • May 25th
Collet Chuck for Brown & Sharpe #11 1-1/2" Straight Shank +3/8" Serrated Collet

Collet Chuck for Brown & Sharpe #11 1-1/2" Straight Shank +3/8" Serrated Collet

  • Lorain, Ohio, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies