CW-3000 AC110V Industrial Water Chiller for CNC Laser Engraving Laser Tube, US $240.00 – Picture 0

CW-3000 AC110V Industrial Water Chiller for CNC Laser Engraving Laser Tube, US $240.00 – Picture 1

CW-3000 AC110V Industrial Water Chiller for CNC Laser Engraving Laser Tube, US $240.00 – Picture 2

CW-3000 AC110V Industrial Water Chiller for CNC Laser Engraving Laser Tube, US $240.00 – Picture 3

CW-3000 AC110V Industrial Water Chiller for CNC Laser Engraving Laser Tube, US $240.00 – Picture 4

Cw-3000 Ac110v Industrial Water Chiller For Cnc Laser Engraving Laser Tube

US $240.00

??, ??, China
Jan 30th

Open on mobile:
QR code

CW-3000 Industrial Water Chiller for 60 / 80W Laser Engraver Engraving Machines - AC110V, 60Hz Description: With design patent Certificate and CE Certificate; This Water Chiller has been sold largely to Europe, South America, Asia and other markets; Economic cooling equipment, easy to install and operate, compact and easily movable. • Comprehensive reference to the international radiator - type cooling system; • It can control the water temperature, precision is ±0.1°C; • Enclosed water tanks; • Professional forced air - cooled radiator; • Equipped with alarm output port. • CW-3000 laser water chiller is suitable for small water cooling device; • Provide stable working conditions for laser devices; • Water can be used for a long time; • High heat dissipating capacity and not easy to be blocked; • Alarm output port can quickly protect sensitive components. It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 Water Chiller if you want the emitting rate higher than 60 %.) • Specific disconnection alarm securing protection; • High cost performance, low failure rate; • Cool Capacity is 50W / °C; • Forces circulation, 9L cooling tank capacity; • It can extend the using life of laser tube and ensure the engraving effect better. The cooling water circulation loop alarm causes and the work of the state table Items Green light Red light Buzzer Out H1, H2 Out H1, H3 Normal On OFF No voice OFF On Water stops up OFF On Voice On OFF Surpasses 60°C OFF On Voice On OFF Pump breakdown OFF On Voice On OFF Water alarm OFF On Voice On OFF Faulted circuit / / / On OFF No Power / / / On OFF Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non – corrosive antifreeze if you are in the northern cold regions. Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps. A. Open the package and check the machine and all accessories. B. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water). C. Connect the inlet and outlet hose between water cooler and laser engraving machine. D. Connect the power cable, turn the power switch (Note: Don’t let the water overflow). E. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm). Caution A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well - ventilated, dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water. To protect the laser tube, cooling fan will suspend the work when the water temperature is low (about 10°C), and it will continue to work when the water temperature rose to higher (about 20°C).

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	sign in china
Item Code	CW-3000-110V
Model	CNC engraving machine