+ Post new Ad
Daewoo Puma 10HC Lathe Tool Holder Blocks Turret Face Wedge Clamp for 1" Square, US $320 – Picture 0
Daewoo Puma 10HC Lathe Tool Holder Blocks Turret Face Wedge Clamp for 1" Square, US $320 – Picture 0

Daewoo Puma 10hc Lathe Tool Holder Blocks Turret Face Wedge Clamp For 1" Square

US $320

  • Surprise, Arizona, United States
  • Jun 2nd
Open on mobile:
QR code
Lathe Turret Face Wedge/Clamp  for 1" OD Tooling This is a wedge block tool holder that is used for clamping Daewoo Puma 10HC  lathe OD tools to the turret.   Bolt center spacing is 52mm (2.047")  Comes with (2) M8x30 cap screws M8 taped hole for tool release Slotted and pined for proper alignment and assembly Made in the USA  (If you need any special size made either for Haas, Okuma, Mazak, Puma, Mori Hitachi Seiki, Harding, ect.  Contact me and I'll have them made for you at a comparable price.)

Directions

Similar products from Supporting Blocks & Sets

Brown & Sharpe No.125 Magnetic Transfer Parallel

Brown & Sharpe No.125 Magnetic Transfer Parallel

  • Chalfont, Pennsylvania, United States
  • Jun 2nd
Machinist 6" Parallel Blocks 1" by 7/16" (4 Way Use)

Machinist 6" Parallel Blocks 1" by 7/16" (4 Way Use)

  • Wheatland, Pennsylvania, United States
  • Jun 2nd
B&S Clamp # 599-0749-2 for 749 V Block.The opening on the bottom is 1.250

B&S Clamp # 599-0749-2 for 749 V Block.The opening on the bottom is 1.250

  • Milwaukee, Wisconsin, United States
  • Jun 2nd
Super Wee Block- Faith Tool Company

Super Wee Block- Faith Tool Company

  • Chalfont, Pennsylvania, United States
  • Jun 2nd
Hwacheon CNC Lathe Tool Holder Blocks Turret Face Wedge Clamp for 1" Square

Hwacheon CNC Lathe Tool Holder Blocks Turret Face Wedge Clamp for 1" Square

  • Surprise, Arizona, United States
  • Jun 2nd
Set of 4 Picador Packing Blox 205 & 206 in original box Made in Great Britain

Set of 4 Picador Packing Blox 205 & 206 in original box Made in Great Britain

  • Swampscott, Massachusetts, United States
  • Jun 2nd
2.87 X 2.36 X 4.29 MAGNETIC V-BLOCK WITH SWITCH (3402-0997) - MADE IN TAIWAN

2.87 X 2.36 X 4.29 MAGNETIC V-BLOCK WITH SWITCH (3402-0997) - MADE IN TAIWAN

  • Chino, California, United States
  • Jun 2nd
Setup Blocks; Step; 6"x4" (CTAM 9257)

Setup Blocks; Step; 6"x4" (CTAM 9257)

  • Sicklerville, New Jersey, United States
  • Jun 2nd
Vintage LS Starrett No. 54 4" Machinist's Hold Downs in Original Box SHIPS FAST

Vintage LS Starrett No. 54 4" Machinist's Hold Downs in Original Box SHIPS FAST

  • Bay City, Michigan, United States
  • Jun 2nd
CD Hangda Machinist's Thin Parallel Bar Set 10 Pair 1/8" X 6" w/case

CD Hangda Machinist's Thin Parallel Bar Set 10 Pair 1/8" X 6" w/case

  • Elk River, Minnesota, United States
  • Jun 2nd
Machinist Center Drill Holder With A 1/4" Center Drill

Machinist Center Drill Holder With A 1/4" Center Drill

  • Wheatland, Pennsylvania, United States
  • Jun 2nd
(2) VERSATILE STEEL IDENTICAL BLOCKS MACHINIST TOOLS w/ T-NUTS, BOLTS

(2) VERSATILE STEEL IDENTICAL BLOCKS MACHINIST TOOLS w/ T-NUTS, BOLTS

  • Albuquerque, New Mexico, United States
  • Jun 2nd
Brown And Sharpe 920 12"x1"x2" Parallel Block

Brown And Sharpe 920 12"x1"x2" Parallel Block

  • Warminster, Pennsylvania, United States
  • Jun 2nd
Pair of 1-3/16 Two Bolt Pillow Blocks 1/2" Bolt Holes ASE06 (H-3)

Pair of 1-3/16 Two Bolt Pillow Blocks 1/2" Bolt Holes ASE06 (H-3)

  • Oxford, Pennsylvania, United States
  • Jun 2nd
Link-Belt 1-3/16" Pillow Block PU3219N (H-3)

Link-Belt 1-3/16" Pillow Block PU3219N (H-3)

  • Oxford, Pennsylvania, United States
  • Jun 2nd
Balanco Set 1

Balanco Set 1

  • Navasota, Texas, United States
  • Jun 2nd
MACHINIST LATHE ANGLE BLOCK?

MACHINIST LATHE ANGLE BLOCK?

  • Prineville, Oregon, United States
  • Jun 2nd
Magnetic on-off Block Machinist Workholder / Dial Indicator / See Photos

Magnetic on-off Block Machinist Workholder / Dial Indicator / See Photos

  • Valley Springs, California, United States
  • Jun 2nd
Machinist V Block, APPROX. 4" x 2-3/4" x 2-3/4"

Machinist V Block, APPROX. 4" x 2-3/4" x 2-3/4"

  • Clinton Township, Michigan, United States
  • Jun 2nd
Hertel - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 4 Flutes, End Mill "NICE"

Hertel - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 4 Flutes, End Mill "NICE"

  • Portland, Oregon, United States
  • Jun 2nd

People who viewed this item also vieved

ROHM KFD-HS 250/3 428660 3400/MIN 65 KN 1 3 JAW LATHE POWER CHUCK

ROHM KFD-HS 250/3 428660 3400/MIN 65 KN 1 3 JAW LATHE POWER CHUCK

  • Clover, South Carolina, United States
  • Jan 30th
Baileigh Ornametal Flat Metal Compact Bar Bender MCB-650

Baileigh Ornametal Flat Metal Compact Bar Bender MCB-650

  • Columbus, Ohio, United States
  • Jan 30th
Drill Chuck Jacobs Taper Pick One NMTB30 New $40.00

Drill Chuck Jacobs Taper Pick One NMTB30 New $40.00

  • Columbus, Ohio, United States
  • Jan 30th
WESPO HOLD-DOWN CLAMP (4651)

WESPO HOLD-DOWN CLAMP (4651)

  • Chicago, Illinois, United States
  • Jan 30th
SIX NEW KNU -VISE - 100 TOGGLE HAND CLAMPS -

SIX NEW KNU -VISE - 100 TOGGLE HAND CLAMPS -

  • United States
  • Jan 30th
Set of four Irwin quick clamps 4451-42

Set of four Irwin quick clamps 4451-42

  • Hillsdale, New Jersey, United States
  • Jan 30th
BAR STOCK PULLER B1 COLLET PADS 1/32 RD STEEL 1/16 RD STEEL #53026

BAR STOCK PULLER B1 COLLET PADS 1/32 RD STEEL 1/16 RD STEEL #53026

  • Resaca, Georgia, United States
  • Jan 30th
COLLET #22 HARDINGE 3/4 ROUND #53021

COLLET #22 HARDINGE 3/4 ROUND #53021

  • Resaca, Georgia, United States
  • Jan 30th
UNIVERSAL ENGINEERING 466997 CAT 40 end MILL ADAPTER 1-1/4" X 4.25" PULL STUD

UNIVERSAL ENGINEERING 466997 CAT 40 end MILL ADAPTER 1-1/4" X 4.25" PULL STUD

  • Roanoke, Virginia, United States
  • Jan 30th
BROWN & SHARPE 10" DIVIDING HEAD 5" CENTER HEIGHT

BROWN & SHARPE 10" DIVIDING HEAD 5" CENTER HEIGHT

  • Ellington, New York, United States
  • Jan 30th
Lathe Dog for up to 1 3/8" diameter Machinist Toolmaker tool

Lathe Dog for up to 1 3/8" diameter Machinist Toolmaker tool

  • Latham, New York, United States
  • Jan 30th
SMALL LATHE CENTER & FACE PLATE TOOL ROOM MACHINIST SHOP PROJECT + Screws

SMALL LATHE CENTER & FACE PLATE TOOL ROOM MACHINIST SHOP PROJECT + Screws

  • Latham, New York, United States
  • Jan 30th
Vintage Cast Iron Wilton Cadet Bullet 3 1/2"Wide Jaws Swivel Vise U.S.A. Made

Vintage Cast Iron Wilton Cadet Bullet 3 1/2"Wide Jaws Swivel Vise U.S.A. Made

  • United States
  • Jan 30th
Wilton Vise 111017 3 1/2"

Wilton Vise 111017 3 1/2"

  • Ridgefield, Washington, United States
  • Jan 30th
HARD STEEL JAW VISE,VICE PLATE 6 X 1.75 X 0.75 KURT

HARD STEEL JAW VISE,VICE PLATE 6 X 1.75 X 0.75 KURT

  • valleyfield, Canada
  • Jan 30th
Rotor 5ST MT-5 Type N 60 Degree Main Line Live Center New Unused Switzerland

Rotor 5ST MT-5 Type N 60 Degree Main Line Live Center New Unused Switzerland

  • Syracuse, Indiana, United States
  • Feb 13th
Grizzly H3403 Cupped Live Center for Wood Lathe, MT1

Grizzly H3403 Cupped Live Center for Wood Lathe, MT1

  • United States
  • Feb 13th
Carbide tipped dead center #9

Carbide tipped dead center #9

  • Ortonville, Michigan, United States
  • Feb 13th
RENISHAW RP3 PROBE / REMOVABLE ARM & BASE - TOOL SETTING FOR TURNING CENTERS

RENISHAW RP3 PROBE / REMOVABLE ARM & BASE - TOOL SETTING FOR TURNING CENTERS

  • Roanoke, Virginia, United States
  • Feb 15th
special grinding machine fixture sliding post assembly unknown brand R-11125

special grinding machine fixture sliding post assembly unknown brand R-11125

  • Warren, Michigan, United States
  • Feb 15th
MAG MATE, PNL1600, Lifting Magnet, 1600 Lb Cap, Locking Handle, Neodymium, /IG4/

MAG MATE, PNL1600, Lifting Magnet, 1600 Lb Cap, Locking Handle, Neodymium, /IG4/

  • Saint Peters, Missouri, United States
  • Feb 15th
DIVIDING HEAD

DIVIDING HEAD

  • Madawaska, Maine, United States
  • May 8th
HAAS HRT 320FB ROTARY TABLE BRUSHLESS TYPE HRT-320FB HRT320FB LMSI

HAAS HRT 320FB ROTARY TABLE BRUSHLESS TYPE HRT-320FB HRT320FB LMSI

  • Sun Valley, California, United States
  • May 9th
Haas HRT 210 Rotary Table Indexer 8-1/4" Diameter Fully Functional 4th Axis Air

Haas HRT 210 Rotary Table Indexer 8-1/4" Diameter Fully Functional 4th Axis Air

  • Santa Clarita, California, United States
  • May 9th
5C collet fixture

5C collet fixture

  • Montebello, California, United States
  • May 30th
Hardinge 5/C 4" Step Chuck

Hardinge 5/C 4" Step Chuck

  • Rochester, New York, United States
  • May 31st
Jacobs Rubber Flex Collet Holder

Jacobs Rubber Flex Collet Holder

  • Troy, Missouri, United States
  • May 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies