Dayton 1/2 Hp 1 Phase 115/230v Centrifugal Pump

US $399.99

Plainfield, Illinois, United States
Jun 9th

Open on mobile:
QR code

[ Dayton 1/2 HP 1 Phase 115/230V Centrifugal Pump Please view the slideshow and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. Please contact us if you have any questions. If you can't see the slideshow below, you can click on the link below which will take you to a Dropbox folder which contains all the photos. Link to Photos This is a Dayton centrifugal pump. It is 1 phase and 1/2 horsepower. The voltage is 115/230 and the amps are 8.4/4.8. The inlet is 1-/4 inches and the outlet is 1 inch. The impeller is semi open non-clogging and stainless steel. The seal type is mechanical and the seal material is viton, carbon, cermaic, SS. This pump is 60 hertz and the shaft size is 5/8 of an inch. The maxiimum liquid temperature is 200 degrees fahrenheit and the liquids compatible are nonflammable and non abrasive. The maximum case pressure is 200 psi and the maximum pressure is 19 psi. The gallons per minute of water at 20 feet of head is 57 and the gallons per minute of water at 40 feet of head is 10. The maximum gallons per minute at head is 67 @ 10 feet and the minimum gallons per minute at head is 10 @ 40 feet. We have inspected this item and have found there to be no signs of damage or prior use. Technical Specifications Item Centrifugal Pump HP 1/2 Phase 1 Voltage 115/230VAC Amps 8.4/4.8 Inlet 1-1/4" Outlet 1" Motor Enclosure ODP Housing Material Stainless Steel Impeller Type Semi Open Non-Clogging Impeller Material Stainless Steel Max. GPM @ Head 67 @ 10 ft. Best Efficiency GPM @ Head 38 gpm @ 27 ft. Min. GPM @ Head 10 @ 40 ft. Max. Head 44 ft. GPM of Water @ 10 Ft. of Head 67 GPM of Water @ 15 Ft. of Head 63 Seal Type Mechanical Seal Material Viton, Carbon, Ceramic, SS Length 13-1/2" Width 6-5/8" Height 5-7/8" NEMA/IEC Frame 56J Motor RPM 3450 Hz 60 Service Factor 1.6 Wetted Materials SS, Viton, Carbon, Ceramic Volute Material Stainless Steel Shaft Material Stainless Steel Shaft Size 5/8" Screw Material Stainless Steel Max. Liquid Temp. 200 Degrees F GPM of Water @ 20 Ft. of Head 57 GPM of Water @ 25 Ft. of Head 48 GPM of Water @ 30 Ft. of Head 40 GPM of Water @ 40 Ft. of Head 10 Best Efficiency Range GPM @ Head 25 to 50 gpm @ 35 to 15 ft. Max. Specific Gravity 1.0 Max. Case Pressure 200 psi Max. Fluid Viscosity 100 SSU Inlet Pressure 200 psi Bearing Type Ball Max. Pressure 19 psi Duty Cycle Continuous Application High Flow at Low Head Pressure Liquid Compatibility Nonflammable, Non Abrasive Please view all the pictures before bidding. The pictures are your best insurance to prevent hassles when attempting to return items. Shipping Weight: 42 lbs, The shipping option you are presented for this item was chosen based on appropriate options (weight, box dimensions, contents). However, we always reserve the right to choose the method that best suits our needs, even though we may be taking a hit on shipping costs. Often, we may select shipping an item as freight based on its dimensional weight, packaging, or size. If you have a strong preference for one carrier over another, let us know at the time of payment so we can accommodate your wishes. INTERNATIONAL BUYERS: We are happy to offer FedEX International delivery options which may be cheaper than the rates you are quoted. Pleae contact us if you are interested in getting a rate quote. International shipping has the added procedures of passing through customs and paying applicable duties, if necessary. It is to be clearly understood that those fees and duties are the responsibility of the buyer. If an item is returned to us due to the buyer's failure to pay these fees, there be be no credit for the original purchase, since the cost of the return postage will be taken from the purchase price. We will accept PayPal, Discover, VISA, American Express or MasterCard Credit Cards. If you wish to pick the item up at our warehouse, located in Plainfield, IL, you are welcome to do so. We will be happy to send you a manual invoice with the shipping charges removed. It is possible to return items. We have a 14 day return policy. The buyer is required to return the item to us. When it is received, it will be inspected and as long as it returns in the same condition it was sent out a full purchase price refund. If the item was our mistake then we will also reimburse the shipping costs. If it was as advertised and the buyer just changed their mind, then we will not refund the original shipping cost. If the item arrives and it damaged we would prefer to attempt to repair the item if possible. If it is not possible we will work with you to resolve the issue. The very best practice is to look at all the pictures and ask questions before bidding. Windy City Liquidation is a corporation that helps its clients dispose of unwanted inventory. Generally speaking, our customers sell through catalogs and eStores. When their catalog changes or their product offering change, they are left with inventory that can not be moved. After all, they do not have a storefront with a Clearance table!. We help our customers get the maximum value for this inventory, either through facilitating donations through a 503.C charity or selling it directly to us. We can sell on consignment, through any auction media and handle all financial transactions. We are located in Plainfield, IL.

Condition:	New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...	MPN	2ZWT9
Brand	Dayton