Dayton 1/2 Hp 3450 Rpm 28 Max Psi 115/208-230v Centrifugal Pump

US $2400

Plainfield, Illinois, United States
Nov 1st

Open on mobile:
QR code

[ Dayton 1/2 HP 3450 RPM 28 Max PSI 115/208-230V Centrifugal Pump Please view the slideshow and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. Please contact us if you have any questions. If you can't see the slideshow below, you can click on the link below which will take you to a Dropbox folder which contains all the photos. Link to Photos This is a Dayton centrifugal pump. It is a self-priming pump. It is powered by 1/2 horse power and it has an RPM of 3450. The voltage is 115/208-230 and the hertz is 60. The amps is 9.4/4.3-4.7. The inlet is 2 inches and the outlet is 1-1/2 inches. The gallons per minute at 10 pounds per square inch is 43. The suction lift is 25 feet. The maximum pressure is 28 pounds per square inch. It is continuous duty. We have inspected this item and we were unable to fully test it. There are some cosmetic scratches around the pump. The mounting is broken off the pump as well. Please refer to the slideshow for more information. We are aware of the imperfections of this item and have priced it accordingly. Technical Specifications Item Centrifugal Pump Type Self-Priming HP 1/2 Phase 1 Voltage 115/208-230 Amps 9.4/4.3-4.7 Hz 60 Inlet (In.) 2 Outlet (In.) 1-1/2 Suction Lift (Ft.) 25 Length (In.) 18-5/8 Width (In.) 6-9/16 Height (In.) 11-13/16 GPM @ 10 PSI 43 GPM @ 15 PSI 41 GPM @ 20 PSI 35 GPM @ 25 PSI 30 GPM @ 30 PSI 25 GPM @ 35 PSI 19 GPM @ 40 PSI 13 Shut-Off (Ft.) 64 Max. Pressure (PSI) 28 Best Efficiency GPM @ Head (Ft.) 35 @ 46 Best Efficiency Range GPM @ Head (Ft.) 19-35 GPM @ 46-80 FT Stages 1 Motor Enclosure TEFC Motor Type Capacitor-Start, Capacitor-Run NEMA/IEC Frame 56J RPM 3450 Service Factor 1.1 Wetted Materials Thermoplastic, SS,Viton,Carbon,Ceramic Housing Material Thermoplastic Impeller Material Noryl Volute Material Thermoplastic Seal Type Viton Fitted Mechanical Shaft Seal Material Viton, Carbon, Ceramic, Stainless Steel Seal Application Water Shaft Material Stainless Steel Screw Material Stainless Steel GPM of Water @ 2 Ft. of Head 46 Thermal Protection Automatic Reset Bearing Type Double Shielded Pre Lubricated Ball Max. Specific Gravity 1 Max. Case Pressure (PSI) 80 Max. Fluid Viscosity 31 SSU Inlet Pressure (PSI) 52 Impeller Type Closed Duty Continuous Port Rotation 90 Degrees Increments Drain Plug Yes Features Stainless Steel Fasteners and Inserts For Use With Nonflammable Liquids Compatible with Pump Component Materials Application Water Transfer, Dewatering and Lawn Sprinkling for Residential and Commercial Uses Please view all the pictures before bidding. The pictures are your best insurance to prevent hassles when attempting to return items. Shipping Weight: 44 lbs, The shipping option you are presented for this item was chosen based on appropriate options (weight, box dimensions, contents). However, we always reserve the right to choose the method that best suits our needs, even though we may be taking a hit on shipping costs. Often, we may select shipping an item as freight based on its dimensional weight, packaging, or size. If you have a strong preference for one carrier over another, let us know at the time of payment so we can accommodate your wishes. INTERNATIONAL BUYERS: We are happy to offer FedEX International delivery options which may be cheaper than the rates you are quoted. Pleae contact us if you are interested in getting a rate quote. International shipping has the added procedures of passing through customs and paying applicable duties, if necessary. It is to be clearly understood that those fees and duties are the responsibility of the buyer. If an item is returned to us due to the buyer's failure to pay these fees, there be be no credit for the original purchase, since the cost of the return postage will be taken from the purchase price. We will accept PayPal, Discover, VISA, American Express or MasterCard Credit Cards. If you wish to pick the item up at our warehouse, located in Plainfield, IL, you are welcome to do so. We will be happy to send you a manual invoice with the shipping charges removed. It is possible to return items. We have a 14 day return policy. The buyer is required to return the item to us. When it is received, it will be inspected and as long as it returns in the same condition it was sent out a full purchase price refund. If the item was our mistake then we will also reimburse the shipping costs. If it was as advertised and the buyer just changed their mind, then we will not refund the original shipping cost. If the item arrives and it damaged we would prefer to attempt to repair the item if possible. If it is not possible we will work with you to resolve the issue. The very best practice is to look at all the pictures and ask questions before bidding. Windy City Liquidation is a corporation that helps its clients dispose of unwanted inventory. Generally speaking, our customers sell through catalogs and eStores. When their catalog changes or their product offering change, they are left with inventory that can not be moved. After all, they do not have a storefront with a Clearance table!. We help our customers get the maximum value for this inventory, either through facilitating donations through a 503.C charity or selling it directly to us. We can sell on consignment, through any auction media and handle all financial transactions. We are located in Plainfield, IL.