Dayton 3/4 Hp 3450 Rpm 208-230/460v 3-phase Centrifugal Pump

US $1796

Plainfield, Illinois, United States
Jun 12th

Open on mobile:
QR code

[ Dayton 3/4 HP 3450 RPM 208-230/460V 3-Phase Centrifugal Pump Please view the slideshow and the technical specifications below the description for the most accurate information on this item. We are a liquidation center so most if not all of our items have torn or missing original packaging. Please contact us if you have any questions. If you can't see the slideshow below, you can click on the link below which will take you to a Dropbox folder which contains all the photos. Link to Photos This is a Dayton centrifugal pump. It is powered by 3/4 horse power and the RPM is 3450. The housing is made of stainless steel. The maximum gallons per minute is 72 at 10 feet of head. The maximum head is 55. The voltage is 208-230/460, the hertz is 60, and the amps is 2.7-2.5/1.2. The overall length is 12-3/4 inches, the overall width is 6-5/8 inches, and the overall height is 5-7/8 inches. The impeller diameter is 3-5/8 inches. The maximum case pressure is 200 pounds per square inch and the inlet pressure is 200 pounds per square inch. The maximum pressure is 23.80 pounds per square inch. The maximum diameter of solids is 1/2 of an inch. It has a 3-phase motor. The inlet is 1-1/4 inches NPT and the outlet is 1 inch NPT. We have inspected this item and we were unable to fully test it. It has some cosmetic scratches and scuffs around the unit. Please refer to the slideshow for more information. We are aware of the imperfections of this item and have priced it accordingly. Technical Specifications Item Centrifugal Pump HP 3/4 Phase 3 Voltage 208-230/460 Amps 2.7-2.5/1.2 Inlet 1-1/4" NPT Outlet 1" NPT Motor Enclosure ODP Housing Material Stainless Steel Impeller Type Semi Open Impeller Material Stainless Steel Max. GPM @ Head 72 gpm @ 10 ft. Best Efficiency GPM @ Head 47 gpm @ 36 ft. Min. GPM @ Head 22 gpm @ 50 ft. Max. Head 55 GPM of Water @ 10 Ft. of Head 72 GPM of Water @ 15 Ft. of Head 67 Seal Type Mechanical Seal Material Viton, Carbon, Ceramic, Stainless Steel Length 12-3/4" Width 6-5/8" Height 5-7/8" Impeller Dia. 3-5/8" NEMA/IEC Frame 56J Motor RPM 3450 Hz 60 Motor Type 3-Phase Service Factor 1.5 Wetted Materials Stainless Steel, Viton, Carbon, Ceramic Volute Material Stainless Steel Shaft Material Stainless Steel Shaft Size 5/8" Screw Material Stainless Steel Max. Liquid Temp. 200 Degrees F GPM of Water @ 20 Ft. of Head 63 GPM of Water @ 25 Ft. of Head 58 GPM of Water @ 30 Ft. of Head 53 GPM of Water @ 40 Ft. of Head 41 GPM of Water @ 50 Ft. of Head 22 Best Efficiency Range GPM @ Head 35-63 gpm @ 45-20 ft. Max. Specific Gravity 1.0 Max. Case Pressure 200 psi Max. Fluid Viscosity 100 SSU Inlet Pressure 200 psi Bearing Type Ball Max. Pressure 23.80 psi Duty Cycle Continuous Max. Dia. Solids 1/2" Number of Port Positions 4 Position Application Suitable for general transfer, boiler feed, condensate return, water circulation, irrigation, cooling towers, filtration, and pressure boosting. Liquid Compatibility Nonflammable, Non Abrasive Pump Length 12-3/4" Please view all the pictures before bidding. The pictures are your best insurance to prevent hassles when attempting to return items. Shipping Weight: 41 lbs, The shipping option you are presented for this item was chosen based on appropriate options (weight, box dimensions, contents). However, we always reserve the right to choose the method that best suits our needs, even though we may be taking a hit on shipping costs. Often, we may select shipping an item as freight based on its dimensional weight, packaging, or size. If you have a strong preference for one carrier over another, let us know at the time of payment so we can accommodate your wishes. INTERNATIONAL BUYERS: We are happy to offer FedEX International delivery options which may be cheaper than the rates you are quoted. Pleae contact us if you are interested in getting a rate quote. International shipping has the added procedures of passing through customs and paying applicable duties, if necessary. It is to be clearly understood that those fees and duties are the responsibility of the buyer. If an item is returned to us due to the buyer's failure to pay these fees, there be be no credit for the original purchase, since the cost of the return postage will be taken from the purchase price. We will accept PayPal, Discover, VISA, American Express or MasterCard Credit Cards. If you wish to pick the item up at our warehouse, located in Plainfield, IL, you are welcome to do so. We will be happy to send you a manual invoice with the shipping charges removed. It is possible to return items. We have a 14 day return policy. The buyer is required to return the item to us. When it is received, it will be inspected and as long as it returns in the same condition it was sent out a full purchase price refund. If the item was our mistake then we will also reimburse the shipping costs. If it was as advertised and the buyer just changed their mind, then we will not refund the original shipping cost. If the item arrives and it damaged we would prefer to attempt to repair the item if possible. If it is not possible we will work with you to resolve the issue. The very best practice is to look at all the pictures and ask questions before bidding. Windy City Liquidation is a corporation that helps its clients dispose of unwanted inventory. Generally speaking, our customers sell through catalogs and eStores. When their catalog changes or their product offering change, they are left with inventory that can not be moved. After all, they do not have a storefront with a Clearance table!. We help our customers get the maximum value for this inventory, either through facilitating donations through a 503.C charity or selling it directly to us. We can sell on consignment, through any auction media and handle all financial transactions. We are located in Plainfield, IL.