+ Post new Ad
DC SPEED CONTROL, DAYTON 5X485C, 90VDC, NEMA 4/12, US $399.75 – Picture 0
DC SPEED CONTROL, DAYTON 5X485C, 90VDC, NEMA 4/12, US $399.75 – Picture 0

Dc Speed Control, Dayton 5x485c, 90vdc, Nema 4/12

US $399.75

  • Roselle, Illinois, United States
  • Mar 13th
Open on mobile:
QR code
 DC SPEED CONTROL, DAYTON 5X485C, 90VDC, NEMA 4/12, equivalent to 5X485 (for 90VDC only)Technical Specs ItemDC Speed Control Shunt Wound Volts100VDC Voltage Output90VDC Input Voltage115VAC EnclosureNEMA 4/12 HP @ Higher Volts1/4 to 2 HP @ Lower Volts1/8 to 1 Speed Range50:1 Speed Regulation+/-1% of Motor Base Speed Current/Torque LimitAdjustable Accepts Tach FeedbackYes Dynamic BrakingNo Linear AccelerationFixed 1 to 3 sec. Linear DecelerationFixed 0.5 sec. Power On LightYes IR CompensationAdjustable Mount TypeWall Height9.5" Depth5.5" Width5" Operating Temp.-10 Degrees to 45 Degrees C External SwitchesOn/Off For Use WithFor Packaging Equipment, Pumps, Fans, Blowers, Conveyors and Other Constant or Dimishg Torques StandardscULus Listed IncludesRun/Stop Switch, Built-in Transient and Surge Suppression
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Brand Dayton
MPN 5X485
Model 5X485C

Directions

Similar products from Motor Speed Regulators & Controllers

USED ERHARDT + LEIMER GEAR WORM REDUCER BT 0102

USED ERHARDT + LEIMER GEAR WORM REDUCER BT 0102

  • Mount Ephraim, New Jersey, United States
  • Mar 13th
NEW KBWC-16K Wall Mount AC Fan Solid State Motor Control, 6A, 120VAC

NEW KBWC-16K Wall Mount AC Fan Solid State Motor Control, 6A, 120VAC

  • Detroit, Michigan, United States
  • Mar 13th
New Solid State Motor Speed Control KBWC-15K 5.0A 120V FREE SHIPPING

New Solid State Motor Speed Control KBWC-15K 5.0A 120V FREE SHIPPING

  • Detroit, Michigan, United States
  • Mar 13th
SEW BMG1 230 VAC MOTOR BRAKE TESTED OK

SEW BMG1 230 VAC MOTOR BRAKE TESTED OK

  • Machesney Park, Illinois, United States
  • Mar 13th
New AC Inverter Adj Frequency Drive 1/4 HP 1 Ph 230V NIB (B51)

New AC Inverter Adj Frequency Drive 1/4 HP 1 Ph 230V NIB (B51)

  • Springfield, Illinois, United States
  • Mar 13th
MINARIK RG200UB 230V 2HP DC DRIVEMOTOR SPEED CONTROL - FREE SHIPPING!!!

MINARIK RG200UB 230V 2HP DC DRIVEMOTOR SPEED CONTROL - FREE SHIPPING!!!

  • Otisville, Michigan, United States
  • Mar 13th
DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER, 202Q10L14

DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER, 202Q10L14

  • Coffeyville, Kansas, United States
  • Mar 13th
DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER 17Q10R56, C-FACE, QUILL INPUT

DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER 17Q10R56, C-FACE, QUILL INPUT

  • Coffeyville, Kansas, United States
  • Mar 13th
DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER, 202Q20L56

DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER, 202Q20L56

  • Coffeyville, Kansas, United States
  • Mar 13th
DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER, 23Q15H14, 2.6HP, 15:1, 140TC FRAME

DODGE TIGEAR-2 RIGHT ANGLE WORM GEAR REDUCER, 23Q15H14, 2.6HP, 15:1, 140TC FRAME

  • Coffeyville, Kansas, United States
  • Mar 13th
Dayton/UNK BM-MFDSC/UNK .33 HP DC Speen Controller (ESC1436)

Dayton/UNK BM-MFDSC/UNK .33 HP DC Speen Controller (ESC1436)

  • Grand Rapids, Michigan, United States
  • Mar 13th
Parker/Compumotor SX6 Stepper Drive (ESC1437)

Parker/Compumotor SX6 Stepper Drive (ESC1437)

  • Grand Rapids, Michigan, United States
  • Mar 13th
2000W SCR Voltage Regulator Dimmer Speed Temperature Controller - High-power

2000W SCR Voltage Regulator Dimmer Speed Temperature Controller - High-power

  • Shenzhen, China
  • Mar 12th
Dart Controls 15DVE 90 VDC Motor Speed Control

Dart Controls 15DVE 90 VDC Motor Speed Control

  • Midland, Michigan, United States
  • Mar 12th
DODGE TIGEAR-2 GEAR REDUCER, 26Q18H14, 140TC FRAME, 97 RPM, 18:1 RATIO

DODGE TIGEAR-2 GEAR REDUCER, 26Q18H14, 140TC FRAME, 97 RPM, 18:1 RATIO

  • Coffeyville, Kansas, United States
  • Mar 12th
SECO BRONCO 110-NO MOTOR SPEED CONTROL DRIVE

SECO BRONCO 110-NO MOTOR SPEED CONTROL DRIVE

  • Camden, New Jersey, United States
  • Mar 12th
Dayton Speed Reducer - 2Z154D, 3/4 hp, 1725 to 138 rpm, Frame 56C, 12:5

Dayton Speed Reducer - 2Z154D, 3/4 hp, 1725 to 138 rpm, Frame 56C, 12:5

  • Mount Olive, North Carolina, United States
  • Mar 12th
DODGE TIGEAR-2 GEAR REDUCER WITH SEPERATE INPUT, 26S15R, 117 RPM, 15:1 RATIO

DODGE TIGEAR-2 GEAR REDUCER WITH SEPERATE INPUT, 26S15R, 117 RPM, 15:1 RATIO

  • Coffeyville, Kansas, United States
  • Mar 12th
Oriental Motor SS21-UL Motor Speed Control Pack 115V

Oriental Motor SS21-UL Motor Speed Control Pack 115V

  • Bardstown, Kentucky, United States
  • Mar 12th
BALDOR DODGE TIGEAR-2 GEAR REDUCER, 26Q20H56, 88 RPM, 2.71 HP, 20:1 RATIO, 56C

BALDOR DODGE TIGEAR-2 GEAR REDUCER, 26Q20H56, 88 RPM, 2.71 HP, 20:1 RATIO, 56C

  • Coffeyville, Kansas, United States
  • Mar 12th

People who viewed this item also vieved

LOT 15 NEW WESTINGHOUSE 112D114H01 HORIZONTAL BUS INSULATOR D359079

LOT 15 NEW WESTINGHOUSE 112D114H01 HORIZONTAL BUS INSULATOR D359079

  • Delta, Ohio, United States
  • Feb 26th
electrodepot lighting contactor 100 A. 4 pole 240 V 120 A. at the coil

electrodepot lighting contactor 100 A. 4 pole 240 V 120 A. at the coil

  • Chillicothe, Ohio, United States
  • Feb 26th
INSTEON 240V 30 AMP LOAD CONTROLLER C DUAL BAND

INSTEON 240V 30 AMP LOAD CONTROLLER C DUAL BAND

  • Chillicothe, Ohio, United States
  • Feb 26th
Cutler hammer ce15bns3 motor starter contactor overload relay 3 phase

Cutler hammer ce15bns3 motor starter contactor overload relay 3 phase

  • Bloomingdale, Illinois, United States
  • Feb 26th
NEW CUTLER HAMMER C10AN30 SER B1 AC 120V-AC 2HP 9A AMP CONTACTOR D358974

NEW CUTLER HAMMER C10AN30 SER B1 AC 120V-AC 2HP 9A AMP CONTACTOR D358974

  • Delta, Ohio, United States
  • Feb 26th
NEW CUTLER HAMMER C10AN30 SIZE 00 AC 120V-AC 2HP 30A AMP CONTACTOR D358960

NEW CUTLER HAMMER C10AN30 SIZE 00 AC 120V-AC 2HP 30A AMP CONTACTOR D358960

  • Delta, Ohio, United States
  • Feb 26th
Square D motor starter heaters b11.5

Square D motor starter heaters b11.5

  • Bloomingdale, Illinois, United States
  • Feb 26th
Square D Overload Relay Thermal Unit AR-9.3 *Lot of 3* Used

Square D Overload Relay Thermal Unit AR-9.3 *Lot of 3* Used

  • Minneapolis, Minnesota, United States
  • Mar 3rd
Square D Overload Relay Thermal Unit AR-17.6 *Lot of 3* Used

Square D Overload Relay Thermal Unit AR-17.6 *Lot of 3* Used

  • Minneapolis, Minnesota, United States
  • Mar 3rd
NEW EATON DILM32-01 POWER CONTACTOR 3POLE 15KW/400V, AC

NEW EATON DILM32-01 POWER CONTACTOR 3POLE 15KW/400V, AC

  • Mesa, Arizona, United States
  • Mar 3rd
AC TECH ADJUSTABLE SPPED AC MOTOR CONTROL SF230

AC TECH ADJUSTABLE SPPED AC MOTOR CONTROL SF230

  • Kenosha, Wisconsin, United States
  • Mar 3rd
(Y4-1) 1 NEW CUTLER-HAMMER H2005A OVERLOAD HEATER ELEMENT

(Y4-1) 1 NEW CUTLER-HAMMER H2005A OVERLOAD HEATER ELEMENT

  • Cleveland, Ohio, United States
  • Mar 3rd
(Y4-1) 1 LOT OF 3 NEW CUTLER-HAMMER H2003A OVERLOAD HEATER ELEMENTS

(Y4-1) 1 LOT OF 3 NEW CUTLER-HAMMER H2003A OVERLOAD HEATER ELEMENTS

  • Cleveland, Ohio, United States
  • Mar 3rd
Square D Overload Relay Thermal Unit AR27 *Lot of 6* Used

Square D Overload Relay Thermal Unit AR27 *Lot of 6* Used

  • Minneapolis, Minnesota, United States
  • Mar 3rd
8mm SK8 Linear Rail Shaft Guide Support Bracket/Bearing CNC Step Motor

8mm SK8 Linear Rail Shaft Guide Support Bracket/Bearing CNC Step Motor

  • china, China
  • Jun 17th
1 2 m542 4.2 A CNC stepper motor drives CT

1 2 m542 4.2 A CNC stepper motor drives CT

  • Shenzhen, China
  • Jun 17th
2 Axis Nema 34 Stepper Motor 1600oz-in/DQ860MA driver CNC Engrave,Laser & Mill

2 Axis Nema 34 Stepper Motor 1600oz-in/DQ860MA driver CNC Engrave,Laser & Mill

  • United States
  • Jun 18th
Oriental Motor UDK5107NW2 5 Phase Driver

Oriental Motor UDK5107NW2 5 Phase Driver

  • Taguig City, Philippines
  • Jun 19th
RE42B-DKNPS 1.8' 170 VDC PARKER COMPUMOTOR STEPPER WITH E106 ENCODER

RE42B-DKNPS 1.8' 170 VDC PARKER COMPUMOTOR STEPPER WITH E106 ENCODER

  • Machesney Park, Illinois, United States
  • Jun 20th
CNC Digitizing Probe Touch Probe Edge Finder Mach3

CNC Digitizing Probe Touch Probe Edge Finder Mach3

  • Voronezh region, Russian Federation
  • Jun 21st
1pcs 2 Phase 4 Wire 1.8 Degree 35mm Square Stepper Motor Dual Ball Bearing F DIY

1pcs 2 Phase 4 Wire 1.8 Degree 35mm Square Stepper Motor Dual Ball Bearing F DIY

  • Hongkong, Hong Kong
  • Jun 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies