US $390
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Iscar |
MPN | 3200678 | ||
Model | Chamdrill | ||
Country/Region of Manufacture | Israel |
Directions
Similar products from Coolant Gun Drills
USED EL DORADO CARBIDE TIPPED GUN DRILL .375" +/- Dia. x .750" Shank x 16.00"OAL
New PTD 7/32 Taper Length Drill Bit Coolant Tin Precision Twist Drill Co
1 ISCAR CHAM DRILL. DCM 115-057-16A-5D. CUT DIAMETER 11.5 MM COOLANT THRU (C15)
Starcut .7280 x 7" Carbide Tipped Gun Drill 2 Flute
Sandvik Coromant RA416.2-0656P19-41 Indexable Insert Coolant Drill
KENNAMETAL KM50 INSERT DRILL KM50KUB1500 1.500" Nice condition.
CJT/KOOLCARB COOLANT FED CARBIDE TIPPED 1" DRILL TYPE 170
SANDVIK USED 1.250" INSERT COOLANT DRILL RA416.1-1250-40-55 (?1.50" SHANK)
MORSE 1.040 COOLANT FED CORE DRILL HSS
31/32 COOLANT FED HSS DRILL BIT FRANCE
Used 37/64 inch Oil Hole Drill 7 inches Long
Used 17/32 inch Oil Hole Drill 7.5 inches Long
Used 31/64 inch Oil Hole Drill 5.5 inches Long
Used 31/64 inch Oil Hole Drill 5 inches Long
Used 0.700 inch Oil Hole Drill 9.75 inches Long
National 1-13/32" High Speed Straight Shank Twist Drill *NEW IN BOX*
KENNAMETAL KUB INDEXABLE DRILL KUB-0937-0200
Older STERLING SPEEDBIT SPRAYMIX Gun Drill Coolant System w/Lines/Used On Lathe
Mill/Lathe/Gun Drill 1" Straight Shank TOOLHOLDER with 1 3/8" Bore 2 3/8" Deep
USED ERICKSON TOOL SPADE DRILL 1.31"
People who viewed this item also vieved
TWIST DRILL 11/16" X 11/16" SHANK X 7.75" LONG DRILL BIT HIGH SPEED
NATIONAL MILLING DRILL 19/32" X 1/2" SHANK X 5-1/2" LONG DRILL BIT HIGH SPEED
CLEFORGE MILLING DRILL 27/32" X 1/2" SHANK X 5.5" LONG DRILL BIT HIGH SPEED
CLE-LINE, screw machine length, Drill Bits, 9/64, 4 pcs, New
25/32" PRECISION TWIST DRILL Screw Machine Length HSS R40
Screw Machine Drills #26 HSS TiN 135D 2-1/16" OAL USA QTY 15 <2204>
High Speed Steel Taper Shank 45/64 Drill Bit HSS Lathe PRECISION Twist Brand New
Lot 2 High Speed Steel Taper Shank 5/16 Drill Bit HSS Lathe PRECISION Twist New
CLE Forge 11/16" x # 2 Taper Shank Twist Drill Bit
LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch,
KENNAMETAL Solid Carbide Drill 19MM/.7480" 5 x Dia TiN Coated + Coolant Through
8.8 mm + 9.4 mm COATED CARBIDE DRILL
Drill bits, 27/64, reduced 1/4" shank, Lot of 3, New and Sharp
CLE-LINE Jobber Drill Bit, 5/16, C18446 made in USA!, Qty 1
Lawson #28 Drill Bits PN 80456
Cobalt Aircraft Ext Drills #47 1.99" 2FL 135D 1" x 6" USA QTY 12 <566>
(2) Spade Drill Holders, 23020H-125F, for 1-1/4" Spade Bit, Assorted bits
Ford 1" x 82 Deg Countersink With Stepped Shank
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies