US $69.99
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Model | MODEL 640 |
Brand | DE STA CO |
Directions
Similar products from Clips & Jaws
CARR LANE CL50PL TOGGLE PLIERS CLAMP 8 CLAMPS 1" CAPACITY
C-Clamp Heavy Duty Steel 6-1/2" Length 3" Width
DE-STA-CO, 484, Squeeze Action Plier Clamp, 1200 Lb Cap., 2.56" Jaw Depth /HV2/
Armstrong No. 0, Bridge,Boiler,Heavy duty C-clamp, opens 0 to 1-1/4"
DE-STA-CO 609 hold down side clamps 6pcs
DE-STA-CO 609 hold down side clamps 6pcs all ok
DE-STA-CO 305 toggle clamps 10 Pcs in all
DE-STA-CO 601 Forward Action Straight-Line Toggle Clamps 10 pcs
Five 3" malleable clamps U. S. A.
Northwestern Riser step Blocks 2s 1s
Used 3" Kant Twist T-Handle Clamp Multi Purpose Copper Jaws
2 Small Parallel Machinist Jewelers Clamp 3/4" max Not sure of brand!
Starrett No. 123 Master Vernier Caliper 14" with Original wood box.
6 Used 1" Pony Spring Clamps 3201
MITEE-BITE Clamping system TSN-625 T-Slot Clamps Kit
People who viewed this item also vieved
12 Pcs. Phase II Hex & Square 5 C Collets With Inside & Outside Thread
LYNDEX 15/16" HEX 3J COLLET 16C 163-060 MACHINIST TOOLMAKER
1/2" R8 COLLET NEW MACHINIST TOOLMAKER MILL BRIDGEPORT
Suburban Tool indexing face plate fixture, v block, WG1- 6 machinist tool
(5) Machinist Angle Block s, Plate, All are 3" - 5" Tall x 2" - 4" Wide, Hardene
Hardinge -C25-D 8 7/8" Fixture Plate NEW OLD STOCK !!!!
VINTAGE 6'' COLUMBIAN BENCH VISE - #506 LOCAL PICK UP ONLY!
Old 3" Machinist Drill Vise Model 108
Parker Bench Top Vise # 384 Machinist Vice Blacksmith
MT6 CARBIDE TIPPED CENTER MILLING GRINDING WORKHOLDING
Heavy 8 3/4" Long Large Live Center From Vintage Metal Lathe 1.25"-1.05" Taper
NEW UNUSED MT1 60 DEGREE DEAD CENTER TOOL 4 ATLAS CRAFTSMAN 6" 618 LATHE
6 jaw chuck for lathe for watch repair watchmaker lathe
BUCK 4" 6-JAW LATHE CHUCK , 5 C MOUNT HARDINGE LATHE
12" Metal Lathe Face Plate With 1/2" T-slots And 1-3/8" Center Through Hole
Used Edward Andrews Steel Boring Bar Sleeve, 4" L, 1.5" OD, 1/2" Bore, EA48-1
Used Edward Andrews Steel Boring Bar Sleeve, 1.50" O.D., 4" Length, EA48-2
Used Morse Taper Adapter from MT #4 Shank To MT #3 Socket, Approx. 6.25 Inches
TWO SETS OF TWO HARDENED PRECISION STEEL 1-2-3 BLOCKS [4 blocks total]
STARRETT No.278 V-BLOCK SET OLD VINTAGE MATCHED TOOLMAKER INSPECT GRINDER MILL
Precision tool maker set up angle blocks.
Troyke 15" rotary table model U15
PALMGREN Rotary Slide Tilting Table, 8 In, X-Y 4 jaw chuck
DA-400 Double Angle Collet Chuck NMTB-50 Taper Shank
15 Pcs Grand No21 Collet Set 1/8" to 1" + Chuck # 521 W/Wrench Made in Germany.
Valenite NMTB 50 TG 100 Collet Chuck Milling Machine Machinist Tool V50M 10SG
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies