Decora Temp & Light Sensor ATP3000L, US $15.00 – Picture 0

Decora Temp & Light Sensor ATP3000L, US $15.00 – Picture 1

Decora Temp & Light Sensor ATP3000L, US $15.00 – Picture 2

Decora Temp & Light Sensor Atp3000l

US $15.00

Delray Beach, Florida, United States
May 3rd

Open on mobile:
QR code

Increase safety while conserving power Automatically turn on lamps and lights when it's dark Attractive Decorator style blends elegantly in any home Great for automatically turning on outdoor landscape lighting Essential Info Want to save power, without the risk of stumbling into furniture when you come home? Let your home automation controller turn on the lights only when you need them with the help of this elegant, Decorator-style Temperature and Light Sensor! Mount this clean-looking sensor in any room to send ambient temperature and light readings to any home control interface with analog inputs, like the Stargate, TimeCommander Plus, HomeVision and LynX-10 systems. Create ideal lighting and temperature macros, increasing your comfort while conserving energy! Regulated power supply voltage between +5-30VDC required. What's Included Decorator-Style Temperature and Light Sensor More Info For example, if the sensor detects a temperature above a pre-determined level, you can program the controller to close the motorized drapes, turn a ceiling fan on, or, if necessary, crank-up the air. If your home is equipped with electronic duct dampers and motion sensors, you can even direct the air conditioner to only cool the rooms that are occupied. The built-in light sensor allows you to control indoor lamps based on the amount of light in the room. You can also mount the sensor outdoors in a weatherproof box to control your landscape lighting! These sensors will not only make your home more energy efficient, they'll also save you money on your monthly electric bill! Operation is simple. Just connect a regulated power supply voltage between +5-30VDC to the screw-down terminals in the rear. Once powered, the unit produces a linearly scaled analog signal proportional to the temperature it detects. That signal can be sent across more than 1,000 feet of cable to the analog input of a compatible controller. For optimum results, use 4-conductor, shielded cable, home run between each sensor and the controller. Two conductors each will be used for the light and temperature detectors. The shield will be a common ground for both circuits. Specifications Specifications Automated Environmental Systems Product No.: ATP3000L Power Supply: +5-30VDC (sold separately) .

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Automated Environmental Systems
Model	ATP3000L