Dental Lab Marathon Micromotor 35k Ppm With Straight Handpiece Contra Angle

US $1326

beijing, China
Jun 9th

Open on mobile:
QR code

Dental Polishing Marathon Machine N3 The Micro motor marathon machine is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving, egg carving etc. Introduction: Multipurpose Micromotor for dental, laboratory, jewelry,industry. Good work for polishing, Cutting, milling, trimming, grinding, casting moulds or materials and finishing surface. Dust seal protection for excellent durability Simple and easy operation with variable Control Speed system. Installed special ball bearings for super high speed(less heat and noise) Another virtue is non-stage speed system (it's well designed to output from 0--- 35,000rpm by using non stage speed system) Features: 1. Non-load Speed: 35,000 rpm Max. 2. Max. Power: Controller Max. 3. Portable and compact size 4. Protective plastic cover 5. Non-stage speed dialing system 6. Continuous variable speed control 7. Forward & Reverse Switch 8. Optional On / Off Foot Pedal Witch (The pedal only a switch, not can be control the speed) 9. Safety protecting fuse 10. Automatic stop and resetting when overload is caused. 11. Available Voltage for worldwide users: A) 220V/50Hz±10% B) 110V/60Hz±10% 12. One year warranty Packing list: 1 x Power Control Unit 1 x On/Off Switch Foot Pedal 1 x Handpiece base Electric E-Type Micro Motor Technical data: Voltage:DC 30V Speed: 0-35,000rpm CE certification Portable Design Installed special ball bearings for super high speed (Do not need add oil) E-Type Motor Connection to your straight & Contra Angle Handpiece Straight and contra angle handpieces This Latch type contra angle low speed handpiece has better quality in its crafts, raw materials, its bearings and turbines are imported from Switzerland. Intended for dental clinical treatment and prevention. Suitable for any E-type headpiece accords with ISO standard Suitable for both steam and chemical autoclave Specification: E type low speed handpiece 1:1 Ratio, with externel cooling system AIR PRESSURE: 245~392Kpa (2.5~4.0 kgf/cm2) WATER PRESSURE: 198Kpa (2 kg) ROTATION SPEED: 22,000~27,000 rpm CHUCK TYPE: Latch type BUR APPLICABLE: ?2.334~2.355 mm NOISE: