+ Post new Ad
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 0
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 1
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 2
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 3
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 0
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 1
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 2
Desco High Speed Steel Drill 19/32" USA 1/2" Shank, US $200 – Picture 3

Desco High Speed Steel Drill 19/32" Usa 1/2" Shank

US $200

  • Portland, Oregon, United States
  • Feb 15th
Open on mobile:
QR code
You are bidding on a new Desco High Speed Steel Drill Bit 19/32" with a 1/2" shank made in USA in its original sleeve. I will try to show this in the photos. The item in the photos is the exact item you are bidding on and the exact item you will receive with the winning bid. Please review the photos. Please contact me if you have questions. Thanks for your interest.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Desco
Country/Region of Manufacture United States
Model 19/32"

Directions

Similar products from Drill Bits with Tapered Shanks

CLE-LINE C09935 59/64-3MT HSS BLACK OXIDE 11IN. TAPER SHANK DRILL BIT

CLE-LINE C09935 59/64-3MT HSS BLACK OXIDE 11IN. TAPER SHANK DRILL BIT

  • Vallejo, California, United States
  • Feb 15th
2-1/2" REGROUND Drill Bit Morse Taper No. 5 Shank MT5 5MT OAL 15"

2-1/2" REGROUND Drill Bit Morse Taper No. 5 Shank MT5 5MT OAL 15"

  • Holland, Ohio, United States
  • Feb 15th
W&B HERCULES HIGH SPEED TAPER shaft DRILL BIT 5/8

W&B HERCULES HIGH SPEED TAPER shaft DRILL BIT 5/8

  • Auburn, New York, United States
  • Feb 15th
Tool bit lot milling cutters assortment good and not so good as is lathe drill

Tool bit lot milling cutters assortment good and not so good as is lathe drill

  • Willoughby, Ohio, United States
  • Feb 15th
50 Plus Asst Machinest Metalworking Drill Bits Some Carbide Tip & Hutto Case

50 Plus Asst Machinest Metalworking Drill Bits Some Carbide Tip & Hutto Case

  • Clare, Michigan, United States
  • Feb 15th
mt2 drills lot and 1 mt3 mill

mt2 drills lot and 1 mt3 mill

  • Temperance, Michigan, United States
  • Feb 15th
mt2 drills lot and 4 mt3 mill/drills

mt2 drills lot and 4 mt3 mill/drills

  • Temperance, Michigan, United States
  • Feb 15th
29pc HSS Tin Coated 118 Degree Drill Bit Set With Cutdown Shank Titanium

29pc HSS Tin Coated 118 Degree Drill Bit Set With Cutdown Shank Titanium

  • Thousand Oaks, California, United States
  • Feb 15th
PRECISION TWIST DRILL 1/2" APPROX 8" OAL HS TAPER SHANK DRILL BIT / BUNDLE OF 6

PRECISION TWIST DRILL 1/2" APPROX 8" OAL HS TAPER SHANK DRILL BIT / BUNDLE OF 6

  • Clinton Township, Michigan, United States
  • Feb 15th
25/32" Drill bit HERCULES #3MT Shank 17" Long *USA*

25/32" Drill bit HERCULES #3MT Shank 17" Long *USA*

  • Davison, Michigan, United States
  • Feb 15th
Desco High Speed Steel Drill 37/64" USA 1/2" Shank

Desco High Speed Steel Drill 37/64" USA 1/2" Shank

  • Portland, Oregon, United States
  • Feb 15th
MORSE TAPER DRILL BIT 39/64 X 18" (L) HIGH SPEED LATHE MILL

MORSE TAPER DRILL BIT 39/64 X 18" (L) HIGH SPEED LATHE MILL

  • Auburn, New York, United States
  • Feb 14th
BALFOUR 2-11/32" Drill Bit Morse Taper 5 Shank MT5 5MT OAL 14"

BALFOUR 2-11/32" Drill Bit Morse Taper 5 Shank MT5 5MT OAL 14"

  • Holland, Ohio, United States
  • Feb 14th
C L 1/2" DRILL BIT WITH No. 2 MORSE TAPER--

C L 1/2" DRILL BIT WITH No. 2 MORSE TAPER--

  • Birmingham, Iowa, United States
  • Feb 14th
LSI TAPERED SHANK DRILL BIT--5/8"---No. 2 MORSE TAPER

LSI TAPERED SHANK DRILL BIT--5/8"---No. 2 MORSE TAPER

  • Birmingham, Iowa, United States
  • Feb 14th
LOT OF 6 5MT SLEEVE 3 AND 4 STANDARD COLLIS

LOT OF 6 5MT SLEEVE 3 AND 4 STANDARD COLLIS

  • Ellington, New York, United States
  • Feb 14th
NICE LOT OF 16 CARBIDE TIPPED 1MT TWIST DRILLS 5/16"

NICE LOT OF 16 CARBIDE TIPPED 1MT TWIST DRILLS 5/16"

  • Ellington, New York, United States
  • Feb 14th
LOT OF 11 JONES 1MT SLEEVES 1/4" AND 11/32"

LOT OF 11 JONES 1MT SLEEVES 1/4" AND 11/32"

  • Ellington, New York, United States
  • Feb 14th
LOT OF 17 2MT DRILL SLEEVES FITS 1MT

LOT OF 17 2MT DRILL SLEEVES FITS 1MT

  • Ellington, New York, United States
  • Feb 14th
NICE LOT OF 23 SLEEVES 1MT X 1/8"

NICE LOT OF 23 SLEEVES 1MT X 1/8"

  • Ellington, New York, United States
  • Feb 14th

People who viewed this item also vieved

Lot 2511 USED AMEC C-150-125 SPADE DRILL 20491-1250

Lot 2511 USED AMEC C-150-125 SPADE DRILL 20491-1250

  • College Station, Texas, United States
  • Jan 30th
Epilog 40 Watt Laser

Epilog 40 Watt Laser

  • Alexandria, Virginia, United States
  • Jan 30th
Grizzly H5567 Straight Flush Trim 3-Piece Set 1/2-Inch Shank

Grizzly H5567 Straight Flush Trim 3-Piece Set 1/2-Inch Shank

  • United States
  • Jan 30th
55/64 TL DRILL W/TANG 2PCS (LS1155-2)

55/64 TL DRILL W/TANG 2PCS (LS1155-2)

  • Miami, Florida, United States
  • Feb 16th
LSI 1/8 SINGLE FLUTE CARBIDE ROUTER BIT (LS1010-5)

LSI 1/8 SINGLE FLUTE CARBIDE ROUTER BIT (LS1010-5)

  • Miami, Florida, United States
  • Feb 16th
LSI 3/8 2 FLUTE LH HELIX CARBIDE ROUTER BIT (LS1009-2)

LSI 3/8 2 FLUTE LH HELIX CARBIDE ROUTER BIT (LS1009-2)

  • Miami, Florida, United States
  • Feb 16th
Solid Carbide spot drill or scrap thru tool coolant 20mm dia.

Solid Carbide spot drill or scrap thru tool coolant 20mm dia.

  • Spartanburg, South Carolina, United States
  • Feb 21st
new .555 solid carbide drill.coolant thru

new .555 solid carbide drill.coolant thru

  • Woburn, Massachusetts, United States
  • Feb 21st
new 9/16" solid carbide long drill.coolant thru

new 9/16" solid carbide long drill.coolant thru

  • Woburn, Massachusetts, United States
  • Feb 21st
DIJET HOSOIDRILL 1-7/64" Coolant Fed TiN Coated DRILL

DIJET HOSOIDRILL 1-7/64" Coolant Fed TiN Coated DRILL

  • Loveland, Ohio, United States
  • Feb 24th
Kennametal KSPD 0515 Supper Point Drill 33/64" Coolant Fed TiN Coated

Kennametal KSPD 0515 Supper Point Drill 33/64" Coolant Fed TiN Coated

  • Loveland, Ohio, United States
  • Feb 24th
3/4 ” Dia. x 10” Flute Coolant Thru Drill HSS #3 Morse Taper

3/4 ” Dia. x 10” Flute Coolant Thru Drill HSS #3 Morse Taper

  • Olathe, Kansas, United States
  • Feb 24th
HIGH SPEED TWIST DRILLS - NORSEMAN- UNION MADE IN USA SIZE 16 - QTY 12

HIGH SPEED TWIST DRILLS - NORSEMAN- UNION MADE IN USA SIZE 16 - QTY 12

  • Davis, California, United States
  • Mar 4th
PAIR OF 27/64 EXTRA LONG HS TAPERED DRILLS 10" LONG USA

PAIR OF 27/64 EXTRA LONG HS TAPERED DRILLS 10" LONG USA

  • Stanhope, New Jersey, United States
  • Mar 4th
Pack of 10 New No. 3 - #3 - .213" HSS TAPER LENGTH TWIST DRILLS - 6" LONG

Pack of 10 New No. 3 - #3 - .213" HSS TAPER LENGTH TWIST DRILLS - 6" LONG

  • Arlington, Texas, United States
  • Mar 4th
Precision HSS Twist Drill 3/16 x 6" 118 Degree point J8 51912 Taneged Oxide M7

Precision HSS Twist Drill 3/16 x 6" 118 Degree point J8 51912 Taneged Oxide M7

  • Bay City, Michigan, United States
  • Mar 27th
SCREW MACHINE DRILL LEFT HAND 7/16" DIAMETER HIGH SPEED TITEX GERMANY NEW $4.36

SCREW MACHINE DRILL LEFT HAND 7/16" DIAMETER HIGH SPEED TITEX GERMANY NEW $4.36

  • North Tonawanda, New York, United States
  • Mar 27th
SCREW MACHINE DRILL LEFT HAND 27/64 DIAMETER HIGH SPEED TITEX GERMANY NEW $4.35

SCREW MACHINE DRILL LEFT HAND 27/64 DIAMETER HIGH SPEED TITEX GERMANY NEW $4.35

  • North Tonawanda, New York, United States
  • Mar 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies