Diy Spray Foam Insulation Closed Cell 1.5 Lb 3800 Board Foot Kit 1-877-772-9629

US $9300

Yulee, Florida, United States
Jun 10th

Open on mobile:
QR code

1.5 LB Density Closed Cell Spray Foam Insulation 5.5 per Inch R-Factor DIY Spray Urethane Foam Made Easy, Do it Yourself, (DIY) DIYSprayUrethaneFoam is a DIY, Do It Yourself Spray Urethane Foam with a hard skin, soft middle spray urethane foam. DIYSprayUrethaneFoam is closed to Closed Cell Hybrid Urethane Foam (See Tech Data Below) to leave you with more insulation dollar per inch. Spray urethane foam is known throughout the world as the best in insulation due to its high R factor and ability to fill cracks and crevices. The FastKick Spray Gun/Proportioner has become the easiest way to apply multi component materials for Do It Yourself Spray Urethane Foam. Your air compressor, 10 CFM@100 PSI or more is all this is required, no electric, no heaters, just an air hose. The air motor pushes the two positive displacement rods up equally through both cartridges at the same time and pressure to assure perfect on ratio spray. The Foam spray is applied with our FastKick Spray Gun Proportioner which makes spraying plural components as easy as spraying paint. You are bidding on our 20 Cases of 1.5 lb Closed Cell SprayFoam that includes a FastKick Foam Applicator Gun. This is package enough to do 3800 Board Feet. The FastKick gun is reusable for years to come and sprays all types of materials such as Polyurea ( known as spray-in bedliner material), Expandothane ( roofing material) Joint Seal, Hardcoat, Etc.. You can always get additional cases of any of our materials. This package deal is enough to do 3,800 Board Feet. Product normally ship out the same day on orders processed before 1:00 pm Eastern Time DIY Foam Supply 1.5 lb Closed Cell Hybrid Foam offers a unique blend of properties which yield excellent mechanical and thermally efficient structures. SprayEZ foams deliver high compressive/shear strength, insulating capacity, overall toughness and impact resistance. Their high performance strength to weight ratio densities produce a wide range of applications for very diverse industries. As an energy saving material yielding very high insulating values, paralleled with its sound absorbing capability it has seen much use in the architectural and construction industries. Fire retardant formulations are used in structural public buildings and warehouses. Installation cure times range from 10 to 20 seconds to touch, full cure up to 12-24 hours depending on ambient temperature and humidity. CLASS 1 FIRE RATED During application, to obtain heavier build thickness, it is important to apply a heavy one-pass delivery. Do not dispense multi-passes as pinholing will occur. Substrate must be dry while relative humidity < 85%. SprayEZ 1,5 lb Closed Cell foam may be applied from 40°F to 100°F in high humidity climates with target surfaces clean and moisture free. R-Factor approx, 5.5 per inch 1.5 lb Closed CELL FOAM SPECIFICATION: DENSITY (PCF) ASTM D1622 1.5(1.5) Fire Rating ASTM E84 Class 1 Thermal Resistance (Rvalue) ASTM C518 5.5 Compressive Strength (psi) ASTM D1621 15 Shear Strength (psi) ASTM C273 18 Shear Modulus ASTM C273 207 Tensile Strength (psi) ASTM D1623 30 Flexual Strength (psi) ASTM C203 45 Flexual Modulus ASTM C203 164 Water Absorption (%vol) ASTM D2842 <1.0 Water Vapor (perm-in) ASTM E96 <1.0 Fungi Resistance ASTM C 1338 None Closed Cell Content (%) Get your own valid XHTML YouTube embed code Get your own valid XHTML YouTube embed code Get your own valid XHTML YouTube embed code Get your own valid XHTML YouTube embed code