DMC Daniels Manufacturing Corporation HX4 Crimper GREAT condition, US $130.00 – Picture 0

DMC Daniels Manufacturing Corporation HX4 Crimper GREAT condition, US $130.00 – Picture 1

DMC Daniels Manufacturing Corporation HX4 Crimper GREAT condition, US $130.00 – Picture 2

Dmc Daniels Manufacturing Corporation Hx4 Crimper Great Condition

US $130.00

Robertsdale, Alabama, United States
Jan 29th

Open on mobile:
QR code

I have a pair of almost brand new crimpers for sale. They come with the Daniels brand Y205P die set. The die set is for crimping RG58 coax cable. Look at the links below and know that you'll save a bundle on this set. It is a must for pilots, mechanics, and experimental builders that want to crimp coax antenna cables on aircraft. Below is an example of the price of these tools when bought new. Just the crimper from Skygeek is $310.50 Just the die set from Skygeek is $158.35 Item Unit Price Qty. Cost Daniels Manufacturing Y205P M22520/5-11 - Die Set For HX4 [remove] $158.35 $158.35 Daniels Manufacturing HX4 M22520/5-01 Crimp Tool [remove] $310.50 $310.50 Subtotal: $468.85 Total: $468.85 From the Manufacturer The DMC HX4 and HX3 series crimp tools feature a system of interchangeable dies which eliminate the need of separate fixed die crimp tools for each and every different application. HX4 Open Frame Crimp Tools. Many maintenance and manufacturing concerns have standardized on one of these models, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single purpose tools. Tremendous flexibility and cost advantages exist with this crimping system due to the wide variety of interchangeable dies which are available for these tool frames. As new requirements evolve, a new set of dies is all that’s required to meet the demand. A truly modern concept which will not require major change with time…only simple additions. Crimping dies are snapped into the tool frame and retained in place by internal spring clips. They may be permanently secured, if desired, by driving a roll pin into the holes provided. The tool frames are equipped with a positive ratchet assembly which controls complete handle movement in both directions. Hexagonal crimp dies are available in a variety of combinations having single, double, and even triple cavity design. These dies accommodate most coaxial and biaxial connectors and contacts conforming to MIL-C-39012, MIL-C-39029, and numerous proprietary configurations. Other designs are available for coaxial connections requiring different termination techniques. Dies in various crimp patterns are also available for insulated and uninsulated terminal lugs, wire splices and end caps relating to M7928, MS17143, MS25036, MS25181, MS27429, MS25274, MS20659, M81824, MS21003 through MS21015, and commercial part numbers. Several power contacts too large for conventional hand tools are also covered by interchangeable dies for the standard tool frame (HX4). If your application requirement is not already covered by one of our standard dies our engineering department will be pleased to discuss a design to suit your needs.DMC169A The HX4 is 11? in length and weighs approximately 21 oz.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	DMC
MPN	HX4
Model	HX4