+ Post new Ad
Doall Heavy Work Slides, US $80.00 – Picture 0
Doall Heavy Work Slides, US $80.00 – Picture 1
Doall Heavy Work Slides, US $80.00 – Picture 0
Doall Heavy Work Slides, US $80.00 – Picture 1

Doall Heavy Work Slides

US $80.00

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Open on mobile:
QR code
Doall Heavy work slides. Ever tried to push a heavy piece of stock on your table and push it through the blade. This makes it about half as easy. Makes a tremendous difference on heavy pieces. They are in good useable condition. Not perfect, but pretty darn good. A few little rust pits here and there but not real bad. Look at the photos... One of those attachments, when you need it, it's nice to have. Ready to install and go to work. Thank you. Item will ship UPS only in the continental USA.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand DoALL

Directions

Similar products from Tools for Saws & Cutting Machines

DoAll C-916 horizontal band saw

DoAll C-916 horizontal band saw

  • Mount Vernon, Illinois, United States
  • Jan 30th
DAKE 370S Semi-Auto Circular Cold Saw, New 2007.

DAKE 370S Semi-Auto Circular Cold Saw, New 2007.

  • Dayton, Ohio, United States
  • Jan 30th
BRAND NEW 2 PAIR SELF CENTERING GUIDES FOR GROB VERTICAL BAND SAWS FREE SHIP

BRAND NEW 2 PAIR SELF CENTERING GUIDES FOR GROB VERTICAL BAND SAWS FREE SHIP

  • Seekonk, Massachusetts, United States
  • Jan 30th
28" Motch & Merryweather Model Cold Saw Machine Shop Fabrication

28" Motch & Merryweather Model Cold Saw Machine Shop Fabrication

  • Gallipolis Ferry, West Virginia, United States
  • Jan 30th
Kalamazoo Metal Cutting Band Saw - In Need of Repair

Kalamazoo Metal Cutting Band Saw - In Need of Repair

  • Cartersville, Georgia, United States
  • Jan 30th
Swivel Screw Feed Assembly Fine Adjustment Pusher

Swivel Screw Feed Assembly Fine Adjustment Pusher

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Oblique Upper and Lower Saw Guide Assebly

Oblique Upper and Lower Saw Guide Assebly

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Upper and Lower Saw Guide Assebly

Upper and Lower Saw Guide Assebly

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Saw Guide Bearing Assembly

Saw Guide Bearing Assembly

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Ratchet Table Feed Assembly, Stock Pusher

Ratchet Table Feed Assembly, Stock Pusher

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Operational Procedure Plaque

Operational Procedure Plaque

  • Baton Rouge, Louisiana, United States
  • Jan 30th
DoAll Vertical Metal Band Cutting Saw Model 26-3 - No Reserve!

DoAll Vertical Metal Band Cutting Saw Model 26-3 - No Reserve!

  • Catskill, New York, United States
  • Jan 30th
NICE GROB MODEL NS-60 VERTICAL BAND SAW BUILT IN 1959 TAKE A LOOK

NICE GROB MODEL NS-60 VERTICAL BAND SAW BUILT IN 1959 TAKE A LOOK

  • Seekonk, Massachusetts, United States
  • Jan 30th
NICE Peerless Vertical Band Saw Model HVC-20, 20" Capacity Variable Speed Welder

NICE Peerless Vertical Band Saw Model HVC-20, 20" Capacity Variable Speed Welder

  • Hopkins, Minnesota, United States
  • Jan 30th
Automatic Cold Saw

Automatic Cold Saw

  • Brampton, Ontario, Canada
  • Jan 30th
SOCO Vertical Slide Automatic Cold Saw, Model HVS-400FA-DR

SOCO Vertical Slide Automatic Cold Saw, Model HVS-400FA-DR

  • Brampton, Ontario, Canada
  • Jan 30th
Saw Blade Sharpener

Saw Blade Sharpener

  • Brampton, Ontario, Canada
  • Jan 30th
Carolina Horizontal Bandsaw HD-10 Blade Wheel C-2186-01

Carolina Horizontal Bandsaw HD-10 Blade Wheel C-2186-01

  • Joliet, Illinois, United States
  • Jan 30th
Carolina Horizontal Bandsaw HD-10 Blade Wheel C-2186-02

Carolina Horizontal Bandsaw HD-10 Blade Wheel C-2186-02

  • Joliet, Illinois, United States
  • Jan 30th
DOALL 60" VERTICAL CONTOUR BAND SAW - POWER TABLE FEED - BLADE COOLANT

DOALL 60" VERTICAL CONTOUR BAND SAW - POWER TABLE FEED - BLADE COOLANT

  • Chino, California, United States
  • Jan 30th

People who viewed this item also vieved

10" Logan Lathe Saddle Model 200, 210, Montgomery Wards Complete!

10" Logan Lathe Saddle Model 200, 210, Montgomery Wards Complete!

  • Minneapolis, Minnesota, United States
  • Mar 1st
South Bend Lathe Roll Bar Cage Notching Fixture

South Bend Lathe Roll Bar Cage Notching Fixture

  • Osceola, Indiana, United States
  • Mar 1st
SOUTH BEND Adjustable Micrometer Carriage Stop Loc: P2-3

SOUTH BEND Adjustable Micrometer Carriage Stop Loc: P2-3

  • Oregon, Ohio, United States
  • Mar 1st
NOS! NIAGARA STAGGERED TOOTH MILLING CUTTER, 3" x 15/16" x 1"

NOS! NIAGARA STAGGERED TOOTH MILLING CUTTER, 3" x 15/16" x 1"

  • Bremen, Indiana, United States
  • Mar 2nd
NOS! MOON STAGGERED TOOTH MILLING CUTTER, 3" x 15/16" x 1"

NOS! MOON STAGGERED TOOTH MILLING CUTTER, 3" x 15/16" x 1"

  • Bremen, Indiana, United States
  • Mar 2nd
NOS! LOT of (4) MILLING CUTTERS, 2-5/32" Diameter / GLENBARD, B&S, POLAND

NOS! LOT of (4) MILLING CUTTERS, 2-5/32" Diameter / GLENBARD, B&S, POLAND

  • Bremen, Indiana, United States
  • Mar 2nd
NICE OKAMOTO ACC-1224DX 3 AXIS FULLY AUTOMATIC SURFACE GRINDER

NICE OKAMOTO ACC-1224DX 3 AXIS FULLY AUTOMATIC SURFACE GRINDER

  • Harrison, New Jersey, United States
  • Mar 11th
18" x 72" NORTON LC-2 PLAIN OD CYLINDRICAL GRINDER, HEAVY PATTERN, 2 AXIS DRO

18" x 72" NORTON LC-2 PLAIN OD CYLINDRICAL GRINDER, HEAVY PATTERN, 2 AXIS DRO

  • Harrison, New Jersey, United States
  • Mar 11th
Suburban tool mg5md drive motor for master grind

Suburban tool mg5md drive motor for master grind

  • Floral, Arkansas, United States
  • Mar 11th
GRS MAESTRO HANDPIECE JEWELRY HAND ENGRAVING TOOLS 2YR WARRANTY NIB 004-947

GRS MAESTRO HANDPIECE JEWELRY HAND ENGRAVING TOOLS 2YR WARRANTY NIB 004-947

  • Mission Viejo, California, United States
  • Mar 11th
GRS MAESTRO MX HANDPIECE JEWELRY HAND ENGRAVING TOOLS 2YR WARRANTY NIB 004-909

GRS MAESTRO MX HANDPIECE JEWELRY HAND ENGRAVING TOOLS 2YR WARRANTY NIB 004-909

  • Mission Viejo, California, United States
  • Mar 11th
GRS MAESTRO EX HANDPIECE JEWELRY HAND ENGRAVING TOOLS 2YR WARRANTY NIB 004-905

GRS MAESTRO EX HANDPIECE JEWELRY HAND ENGRAVING TOOLS 2YR WARRANTY NIB 004-905

  • Mission Viejo, California, United States
  • Mar 11th
Procunier Style e High-speed Tapping Heads Series 11000, S 11006, Model 1 Sn E

Procunier Style e High-speed Tapping Heads Series 11000, S 11006, Model 1 Sn E

  • Oak Forest, Illinois, United States
  • Mar 24th
Recoil 05366 Thread Threaded Inserts M36-4 x3D Helicoil 1 Insert

Recoil 05366 Thread Threaded Inserts M36-4 x3D Helicoil 1 Insert

  • Crestview, Florida, United States
  • Mar 24th
HSCo 13/64" DRILLS 13/64" SHANK 3.7" OAL QTY9 (LOC1566) TS14

HSCo 13/64" DRILLS 13/64" SHANK 3.7" OAL QTY9 (LOC1566) TS14

  • Laingsburg, Michigan, United States
  • Mar 24th
Bolton Tools 16 Ton Hydraulic Pipe Bender HB-16

Bolton Tools 16 Ton Hydraulic Pipe Bender HB-16

  • Rowland Heights, California, United States
  • May 8th
BECHLER cnc Shaper hear machine

BECHLER cnc Shaper hear machine

  • Orange, California, United States
  • May 9th
Atlas No. 3 Compound Mandrel Press 12 Ton With Stand

Atlas No. 3 Compound Mandrel Press 12 Ton With Stand

  • Piedmont, South Carolina, United States
  • May 9th
Titanium 6" Wide Anode Baskets- Lot of 20 (AB2158)

Titanium 6" Wide Anode Baskets- Lot of 20 (AB2158)

  • Sparta, Michigan, United States
  • Jun 19th
SUNNEN PARTS CK-1850A Feed Rod and U-joint Assembly - New in original box

SUNNEN PARTS CK-1850A Feed Rod and U-joint Assembly - New in original box

  • Evansville, Indiana, United States
  • Jun 19th
Sunnen Hone 2H-P28-200-wf Mandrel

Sunnen Hone 2H-P28-200-wf Mandrel

  • Bristol, Pennsylvania, United States
  • Jun 19th
2005 CHARMILLES FORM 20 ZNC RAM TYPE EDM, 64 AMP POWER, TOUCH CONTROL

2005 CHARMILLES FORM 20 ZNC RAM TYPE EDM, 64 AMP POWER, TOUCH CONTROL

  • Harrison, New Jersey, United States
  • May 25th
12" Y 18" X Maximat V-45 RAM-TYPE EDM, 46" x 25" x 16" WkTank, Conweb orbitor,

12" Y 18" X Maximat V-45 RAM-TYPE EDM, 46" x 25" x 16" WkTank, Conweb orbitor,

  • Harrison, New Jersey, United States
  • May 25th
Eltee TRM-21 RAM-TYPE EDM, P300CP POWER SUPPLY & CONTROL, 3X DRO, SYSTEM 3R

Eltee TRM-21 RAM-TYPE EDM, P300CP POWER SUPPLY & CONTROL, 3X DRO, SYSTEM 3R

  • Harrison, New Jersey, United States
  • May 25th
B & S BROWN & SHARPE #3 ULTRAMATIC SCREW MACHINE TURRET TOOLING ***SUPERB***

B & S BROWN & SHARPE #3 ULTRAMATIC SCREW MACHINE TURRET TOOLING ***SUPERB***

  • Highland, New York, United States
  • May 26th
Brown & Sharpe Balance Turning Tool 5/8" Shank for 00 Turret Lathe Screw Machine

Brown & Sharpe Balance Turning Tool 5/8" Shank for 00 Turret Lathe Screw Machine

  • Lorain, Ohio, United States
  • May 26th
42 Pc Lot Brown & Sharpe Automatic Lathe Screw Machine Cam Holder Halves

42 Pc Lot Brown & Sharpe Automatic Lathe Screw Machine Cam Holder Halves

  • Lorain, Ohio, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies