US $19.99
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Brand | Dodge |
Model | 1610X1-1/4" |
Directions
Similar products from Other Workholding Tools
12 X 12 X 20 SQUARE WORK HOLDING FIXTURE,TOMBSTONE CNC HORIZONTAL MACHING CENTER
Flanged Nut 7/8-9 Flange Nuts Black Oxide Case Harden
ROHM 88065 DRIVING DISC & CENTER
Glaston Bavelloni Diamond Wheel 21915000005 895885 80 M1070 U12.5 150x16x22
Precision 8-200mm Boring Head System+8pcs Borin Bar +R8 Milling ToolHolder Set
Precision 8-200mm Boring Head System+8pcs Borin Bar +BT30 M12 ToolHolder Set
Precision 8-200mm Boring Head System+8pcs Borin Bar +NT40 M16 ToolHolder Set
Hilma-Rumheld Hydraulic Hollow piston Single Acting T-Slot Clamping Cylinder
5 - Kipp Pull Knob M12 x 1.5 Indexing Plungers, Non-Locking, 03090-1206, QTY. 5
EARTH CHAIN EZ-LIFT ELM-600 LIFTING MAGNET RATED 1320LB
MAPCO 1 X 2-1/2 PULL DOWELS 5PCS (D201-5)
MAPCO 1 X 3 PULL DOWELS 5PCS (D202-5)
MAPCO 1 X 3-1/2 PULL DOWELS 5PCS (D203-5)
MAPCO 3/4 X 1 PULL DOWELS 12PCS (D188-12)
MAPCO 3/4 X 1-1/2 PULL DOWELS 10PCS (D189-10)
MAPCO 3/4 X 1-3/4 PULL DOWELS 10PCS (D190-10)
MAPCO 3/4 X 2 PULL DOWELS 10PCS (D192-10)
MAPCO 3/4 X 2-1/2 PULL DOWELS 9PCS (D196-9)
MAPCO 3/4 X 2-1/4 PULL DOWELS 6PCS (D194-6)
People who viewed this item also vieved
LOT of (30) R-S-B SOUTH BEND 5C COLLETS, METRIC: 2mm-27mm
SANDVIK TAP DRIVER COLLET 360206-17.45-687
JACOBS RUBBER FLEX LATHE COLLET SET 1/16-5/8
Used 30" x 21.25" x 44" tall tombstone
Kreg 30" Aluminum Workshop Jig and Miter Fixture Mounting Bar - Part # KMS7303
SWIVEL MACHINE VISE BASE FOR MILL OR VMC 6-3/8" CENTER TO CENTER
Pair 6” Deep Kant Twist Clamps
Bessey SQ8 8-Inch Super Quick All Steel Sliding Arm Clamp
Samsons Grip 408 Machinist "C" Clamps Pair of 8" Opening Forged Steel USA!
27.5" 4-JAW MANUAL CHUCK, TM, 10.25" HOLE, ONE PIECE JAWS, A2-11
6 1/4" 3 Jaw Self Centering Poland Lathe Chuck With 2 1/4" rear thread 8ZD
Kitagawa B208 8" CNC Lathe Chuck
Ridgid F Series Forged Steel Bench Swivel Vise 6" Jaw Width Machinist
Bridgeport Milling Vise With Jaws (Inv.33315)
Bridgeport Milling Vise With Jaws (Inv.33314)
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''
ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT
25" Troyke T-slotted Rotary Table Model BH-25
4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE
Peiseler PT 160 Indexing Table w/ Tailstock, 4 x 90 degree, Mfg'd 1996, Used
MAGNETIC V BLOCK, 2 SIDED - 1" & 2"
1.25” x 1.25” x 1.625” Vee Block
B&V collet chuck 20 MM w/ case
Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies