DOW CORNING Sylgard 184 Solar Cell Panel Silicone Encapsulation Encapsulant Kit, US $48.95 – Picture 0

DOW CORNING Sylgard 184 Solar Cell Panel Silicone Encapsulation Encapsulant Kit, US $48.95 – Picture 1

Dow Corning Sylgard 184 Solar Cell Panel Silicone Encapsulation Encapsulant Kit

US $48.95

Verona, New Jersey, United States
Feb 24th

Open on mobile:
QR code

Dow Corning® Sylgard® 184 Silicone Elastomer Kit 0.5 Kg (1.1 lbs.) NET WEIGHT FRESH DATED, in FACTORY SEALED BOX *GENUINE* DOW CORNING® Sylgard® 184 Silicone (Polydimethylsiloxane, PDMS) Elastomer Encapsulation Kit. 2-part, clear/transparent, 10:1, Room Temperature (RT) and heat cure, good strength, good flame resistance, UL and Mil Spec, same as SYLGARD® 182 but with faster RT cure. Mixable by hand or by automatic mixing/dispensing method. PROVEN PERFORMANCE - TRUSTED BY USERS WORLDWIDE USE ONLY THE GUARANTEED BEST DOW CORNING products are recommended by top manufactureres and end users around the world. FEATURES: - Transparent - Cures to flexible elastomer - Constant cure rate, regardless of sectional thickness or degree of confinement - Service range of -45 to 200°C (-49 to 392°F) - No post cure required - Two part, 10:1 mix - RT/HA cure - Minimal shrinkage - No exotherm during cure - No solvents or cure byproducts - Repairable - Good dielectric properties - Deep section cure - UL 94 V1, V0 - UL RTI 130°C (266°F) - Same as Sylgard® 182 but with RT cure capability APPLICATIONS: - Adhesive/encapsulant for solar cells - Protection of electrical/electronic devices. - General potting applications - Power supplies - Connectors - Sensors - Industrial controls - Transformers - Amplifiers - High voltage resistor packs - Relays - Adhesive handling beam lead integrated circuits during processing SPECIFICATIONS: - Working Time at 25?C (Pot Life): 1.4 hours - Cure Time at 25?C (77?C): 48 hours - Heat Cure Time @ 100?C (212?F): 35 minutes - Heat Cure Time @ 125?C (257?F): 20 minutes - Heat Cure Time @ 150?C (302?F): 10 minutes - Specific Gravity (Cured): 1.04 POT LIFE AND CURE RATE: Cure reaction begins with the mixing process. Initially, cure is evidenced by a gradual increase in viscosity, followed by gelation and conversion to a solid elastomer. Pot life is defined as the time required for viscosity to double after Parts A and B (base and curing agent) are mixed and is highly temperature and application dependent. Please refer to the data table. Always follow the manufacturer's mix and use instructions. BUYERS: Please be aware that changes to eBay rules and metrics make your STARS feedback ratings ultra-important to sellers. Our ability to conduct business on eBay and our profitability are strongly influenced by your ratings and we ask for your care and consideration when rating our performance. We thank you for your business and hope to again be of service to you in the future. TERMS & CONDITIONS By bidding and paying for this Item, the Bidder/Buyer agrees to the following TERMS & CONDITIONS: Buyer must determine own usability. Listing description is correct to the best of our knowledge at the time of listing and Seller is not responsible for errors or omissions in the listing information. Unless otherwise stated, data and specifications given are taken from information found on the Item, in the literature accompanying the Item, or from the website of the manufacturer or a distributor of the Item. In any and all cases, Seller's liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. The Bidder/Buyer agrees to assume all responsibility and risk regarding the safety, suitability of use and legal requirements concerning ownership, storage, installation, operation and use of the Item and to hold Seller harmless and free of all liability regarding the safety, condition, usability, installation, use, maintenance, disposal, legality and suitability of use and any other issues regarding this Item. Item is a commercial and industrial industrial use product intended for installation and use by qualified personnel and can cause injury or damage if improperly used or installed. Proper and safe installation and operation is the sole responsibility of the Buyer. Buyer is urged to consult the original manufacturer of the equipment in which the Item will be used for installation, safety, maintenance and operating instructions which may also be available online at the manufacturer’s website. In any and all cases, Seller's liability is limited to the amount of the winning bid paid and does not include any direct, indirect, incidental or miscellaneous damages, or any other damages, inconveniences, costs or expenses. Please contact us by email if you have any questions or need clarifications on the listed information. Please include the listing number or description in your email. Note that if you wait until the last day, we may not be able to get back to you before the auction closes. We will do our best to answer all questions accurately and promptly. We greatly value our customers and our reputation and will work diligently with customers to achieve our goal of mutual satisfaction and positive feedback on every transaction. Sylgard® and Dow Corning® are registered trademarks of Dow Corning Corporation. We are independent suppliers of high quality lubricants and sealants and we proudly sell Dow Corning® and other top brand products. We are not a factory licensed distributor of Dow Corning® products. Buyer pays shipping cost as stated. USPS First Class Mail and USPS First Class Mail International are our shipping methods of choice for this Item. If paying by PayPal, we will ship to the address associated with the PayPal payment unless prior arrangement is approved by us. If paying by other than PayPal, please send your shipping address including zip code and delivery contact phone number as soon as you are notified that you are the winning bidder. Payment via PayPal is preferred. Major credit cards accepted through PayPal. VISA / MC also accepted via our own merchant account (for security pls. CALL us w/ CC info - DO NOT EMAIL CC INFO). Payment upon pick-up is acceptable w/ prior notice. International customers must pay in USD$ only. Contact us immediately if you have any questions regarding payment options. We make every effort to ship within 3 business days after payment is received. If payment is not received within 7 days after email notification to Buyer of amount due, transaction is subject to being reported as failed for non-payment and the Item being sold to another buyer. Please contact us as soon as possible if you have questions regarding payment. WE SHIP INTERNATIONALLY but, due to delivery problems, not to some locations. Bidders in a location that we do not show a shipping option for, please contact us BEFORE bidding. TO OUR INTERNATIONAL CUSTOMERS: ALL INTERNATIONAL customs clearances and import taxes and fees are the sole responsibility of the Buyer at destination. Re-shipping of items returned to us as undeliverable by foreign post authorities will require re-payment of shipping costs to re-ship. Thank you for considering our products! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Dow Corning
Model	Sylgard 184