+ Post new Ad
Dynabrade 52050 Pneumatic Dyninger Finishing Sander, US $540 – Picture 0
Dynabrade 52050 Pneumatic Dyninger Finishing Sander, US $540 – Picture 0

Dynabrade 52050 Pneumatic Dyninger Finishing Sander

US $540

  • Bozeman, Montana, United States
  • Nov 11th
Open on mobile:
QR code
This tool is an excellent choice for those who are looking to enhance their whitewood/sealer sanding, deburring of light metal, fabrication, and finishing of composite surfaces. It is especially great for woodworkers who require contour sanding to achieve a perfect finish. The Dynabrade 52050 is an exceptional Pneumatic Dyninger Finishing Sander that comes equipped with an 80 grit sanding star by Dynabrade (93166). This amazing tool is lightweight, air-powered, and perfect for use with Spindle-Mount, Arbor-Mount, and Eyelet Sanding Stars. It has a 0-3,200 RPM, 4 hp, 1/4-Inch Collet Mount and can accommodate 4-Inch diameter spindle-mount abrasive sanding stars with 1/4-Inch shank, or Eyelet Dy-Cut sanding stars. Payments are accepted through PayPal only, and several other grits are available until sold under a separate listing. Invest in the Dynabrade 52050 Pneumatic Dyninger Finishing Sander and take your applications to a whole new level! This product is practically new, having been used only on two chair seats before the seller became ill. The seller is now consolidating their equipment to their shop in Montana and no longer resides in Florida. They are the original buyer and hopeful user of this incredible piece of equipment.

Directions

Similar products from Other Cutting Equipment & Expendables

Timing Belt Pulley Gear Hob STD 5M Gear hob S5M Gear hob cutter

Timing Belt Pulley Gear Hob STD 5M Gear hob S5M Gear hob cutter

  • CN, China
  • Nov 12th
Timing Belt Pulley Gear Hob STD 4.5M Gear hob S4.5M Gear hob cutter

Timing Belt Pulley Gear Hob STD 4.5M Gear hob S4.5M Gear hob cutter

  • CN, China
  • Nov 12th
HERTEL #8 COMBINATION DRILL & COUNTERSINK SCD11008H ~ New 3/4 DIA.

HERTEL #8 COMBINATION DRILL & COUNTERSINK SCD11008H ~ New 3/4 DIA.

  • Pomona, California, United States
  • Nov 12th
Timing Belt Pulley Gear Hob STD 8M Gear hob S8M Gear hob cutter

Timing Belt Pulley Gear Hob STD 8M Gear hob S8M Gear hob cutter

  • CN, China
  • Nov 12th
Timing Belt Pulley Gear Hob STD 3M Gear hob S3M Gear hob cutter

Timing Belt Pulley Gear Hob STD 3M Gear hob S3M Gear hob cutter

  • CN, China
  • Nov 12th
Bay State Diamond Wheel GRINDER ATTACHMENT, 6" Dia .

Bay State Diamond Wheel GRINDER ATTACHMENT, 6" Dia .

  • East Hanover, New Jersey, United States
  • Nov 12th
Slugger Sheet Metal Cutters

Slugger Sheet Metal Cutters

  • Riverview, Florida, United States
  • Nov 12th
Magnetic drill Arbor R8 to 3/4'' Weldon Shank for for Milling #MC08-0034U

Magnetic drill Arbor R8 to 3/4'' Weldon Shank for for Milling #MC08-0034U

  • TORONTO, ONTARIO, Canada
  • Nov 11th
TOME FETEIRA 10" HALF ROUND CUT FILE NEW SEE AVAILABLE PHOTOS

TOME FETEIRA 10" HALF ROUND CUT FILE NEW SEE AVAILABLE PHOTOS

  • Lompoc, California, United States
  • Nov 11th
GREENFIELD THREAD MILL TMX 0075-248-4-30 STK 1977

GREENFIELD THREAD MILL TMX 0075-248-4-30 STK 1977

  • Wadley, Alabama, United States
  • Nov 11th
3-56 CARBON STEEL HEXAGONAL RE-THREADING DIE

3-56 CARBON STEEL HEXAGONAL RE-THREADING DIE

  • Petaluma, California, United States
  • Nov 11th
Magnetic drill Arbor R8 to 3/4'' Weldon Shank for for Milling #MC08-0034U1

Magnetic drill Arbor R8 to 3/4'' Weldon Shank for for Milling #MC08-0034U1

  • TORONTO, ONTARIO, Canada
  • Nov 11th
RA390-063R19-17L Sandvik Coromant Square Shoulder Mill Cutter W/Arbor G.U.C.

RA390-063R19-17L Sandvik Coromant Square Shoulder Mill Cutter W/Arbor G.U.C.

  • Rome, New York, United States
  • Nov 10th
Glyclean Antifreeze Coolant Recycling System

Glyclean Antifreeze Coolant Recycling System

  • Poplar Grove, Illinois, United States
  • Nov 10th
Yankee Corporation Yankee #10 1/64 O/S Fractional (.3280) High Speed Steel

Yankee Corporation Yankee #10 1/64 O/S Fractional (.3280) High Speed Steel

  • USA, United States
  • Nov 10th
Yankee Corporation Yankee 1/2" 1/64 O/S Fractional (.7710) High Speed Steel

Yankee Corporation Yankee 1/2" 1/64 O/S Fractional (.7710) High Speed Steel

  • USA, United States
  • Nov 10th
Yankee Corporation Yankee 12mm Metric (.7283) High Speed Steel Capscrew

Yankee Corporation Yankee 12mm Metric (.7283) High Speed Steel Capscrew

  • USA, United States
  • Nov 10th
MotorVac Carbon Clean MCS 245

MotorVac Carbon Clean MCS 245

  • Poplar Grove, Illinois, United States
  • Nov 10th
HHIP 2001-0220 4 Piece Deburring Tool Set B, B10 & B20

HHIP 2001-0220 4 Piece Deburring Tool Set B, B10 & B20

  • USA, United States
  • Nov 10th
PUTNAM. C91709 CONTINOUS COUNTERBORE 3FL 21/64"DIA. 31/64"LOC 7/16"SH DIA 6" OAL

PUTNAM. C91709 CONTINOUS COUNTERBORE 3FL 21/64"DIA. 31/64"LOC 7/16"SH DIA 6" OAL

  • Spencer, Indiana, United States
  • Nov 9th

People who viewed this item also vieved

duMONT 77708 11/32 HEX. BROACH PILOT

duMONT 77708 11/32 HEX. BROACH PILOT

  • West Milford, New Jersey, United States
  • Jan 30th
Machinists 11/30 BUY NOW Dumont (the best 8mm Keyslot Broach Little ?? No ?? use

Machinists 11/30 BUY NOW Dumont (the best 8mm Keyslot Broach Little ?? No ?? use

  • Lutz, Florida, United States
  • Jan 30th
Kennametal CNMG432 KC850 Turning Carbide Inserts

Kennametal CNMG432 KC850 Turning Carbide Inserts

  • Port Hueneme, California, United States
  • Jan 30th
5 Pcs. CARMEX 16 ER AG60 BXC Carbide Threading Inserts 60°

5 Pcs. CARMEX 16 ER AG60 BXC Carbide Threading Inserts 60°

  • Tel Aviv, Israel
  • Jan 30th
FIVE KENNAMETAL SDET43PDEL8GB2 SDET1204PDELGB2 KC725M INSERT a16

FIVE KENNAMETAL SDET43PDEL8GB2 SDET1204PDELGB2 KC725M INSERT a16

  • Gardena, California, United States
  • Jan 30th
TWO KENNAMETAL DWG 1007826R00 INSERT a25

TWO KENNAMETAL DWG 1007826R00 INSERT a25

  • Gardena, California, United States
  • Jan 30th
2 NEW 3/4 x 4 x 1 1/2 flute. One SE 4FL SQ. And One SE 4FL BN carbide end mills

2 NEW 3/4 x 4 x 1 1/2 flute. One SE 4FL SQ. And One SE 4FL BN carbide end mills

  • Schuylkill Haven, Pennsylvania, United States
  • Jan 30th
Niagara Cutter Carbide DPB230 2FL Diamond Plated 1/2x1/2x1x3 EDP# 18438

Niagara Cutter Carbide DPB230 2FL Diamond Plated 1/2x1/2x1x3 EDP# 18438

  • Reynoldsville, Pennsylvania, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Set of Drive Pin Punch es in Case

MACHINIST TOOLS LATHE MILL Set of Drive Pin Punch es in Case

  • Morris Plains, New Jersey, United States
  • Jan 30th
3/8" - 16" Tap and handle

3/8" - 16" Tap and handle

  • Austell, Georgia, United States
  • Jan 30th
9/16" Expansion, Carbide Tip Reamer, Straight Shank, NEW, NEW

9/16" Expansion, Carbide Tip Reamer, Straight Shank, NEW, NEW

  • Elmwood Park, Illinois, United States
  • Jan 30th
18 Pcs H.S.S. Tap & Drill Set, Metric, in Metal Box, #0001-0052

18 Pcs H.S.S. Tap & Drill Set, Metric, in Metal Box, #0001-0052

  • TORONTO, ONTARIO, Canada
  • Jan 30th
New 10Pcs Wood/Soft Metal Universal Blade for Fein Bosch Oscillating Multi Tools

New 10Pcs Wood/Soft Metal Universal Blade for Fein Bosch Oscillating Multi Tools

  • Shanghai, China
  • Jan 30th
JET 708719 Replacement Upper & Lower Guide Blocks

JET 708719 Replacement Upper & Lower Guide Blocks

  • Denver, Pennsylvania, United States
  • Jan 30th
Fastenal 14 MM High Speed Twist Drill S&D 6" Length 1/2 Shank Black & Gold #4

Fastenal 14 MM High Speed Twist Drill S&D 6" Length 1/2 Shank Black & Gold #4

  • Vineland, New Jersey, United States
  • Jan 30th
R56 Drill Bit S&D 1/2" Shank HSS Black & Bright #3

R56 Drill Bit S&D 1/2" Shank HSS Black & Bright #3

  • Vineland, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies