+ Post new Ad
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR, US $48.00 – Picture 0
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR, US $48.00 – Picture 1
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR, US $48.00 – Picture 2
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR, US $48.00 – Picture 0
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR, US $48.00 – Picture 1
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR, US $48.00 – Picture 2

Dz Brand Jt6 Key Type Drill Chuck And Cat40 Drill Chuck Arbor

US $48.00

  • Murfreesboro, Tennessee, United States
  • Jan 30th
Open on mobile:
QR code
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR Buy Together and SAVE! JT6 DRILL CHUCK ARBOR SpecificationsRunout: .1mm/.004in TIR Gage Length: 45mm/1.77in Finish: Black Oxide Material: Hardened Alloy Steel Rear Thread: 5/8-11 Taper: CAT 40 Brand: DZ Features - Alloy steel hardened to 50-52 rc - Critical surfaces precision ground DRILL CHUCK ARBOR DIMENSIONS JT6 KEY TYPE DRILL CHUCK Specifications Runout: Finish: Black Oxide Material: Hardened Alloy Steel Taper: JT6 Diameter: 57mm/2.244in Length: 98mm/3.858in Brand: DZ Features - Alloy steel hardened to 50-52 rc - Jaws hardened to 58 rc - Critical surfaces precision ground - Capable of holding shanks from .3-13.5mm/.012-.532in - Suitable fro medium or heavy duty drillikng use - Drill chuck screwed from back for security during high cutting loads
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer DZ
Model JT6-BUN
Brand DZ
MPN JT6-BUN

Directions

Similar products from Lathe Chucks

Buck 4” 4 Jaw independent Chuck

Buck 4” 4 Jaw independent Chuck

  • Oregon, Ohio, United States
  • Jan 30th
Pratt Burnerd 16" 4 jaw chuck reversible independent, D1-8 Cam lock

Pratt Burnerd 16" 4 jaw chuck reversible independent, D1-8 Cam lock

  • Oregon, Ohio, United States
  • Jan 30th
BISON Set-Tru(5342 05) 3 Jaw(Changeable) 6" Chuck

BISON Set-Tru(5342 05) 3 Jaw(Changeable) 6" Chuck

  • Oregon, Ohio, United States
  • Jan 30th
SKINNER D16 TEN INCH CAMLOCK MOUNT LATHE CHUCK

SKINNER D16 TEN INCH CAMLOCK MOUNT LATHE CHUCK

  • Beaver Falls, Pennsylvania, United States
  • Jan 30th
EDM Angle Plate / EDM

EDM Angle Plate / EDM

  • Crothersville, Indiana, United States
  • Jan 30th
16C Hardinge Power Chuck

16C Hardinge Power Chuck

  • Lancaster, New York, United States
  • Jan 30th
LATHE CHUCK JAWS FOUR 4

LATHE CHUCK JAWS FOUR 4

  • Utica, Kentucky, United States
  • Jan 30th
CUSHMAN 12" THRU HOLE POWER CHUCK 10-590-12-A08C

CUSHMAN 12" THRU HOLE POWER CHUCK 10-590-12-A08C

  • Jackson, Michigan, United States
  • Jan 30th
HO-8300F Lathe Chuck Steel Soft Jaws set of 3

HO-8300F Lathe Chuck Steel Soft Jaws set of 3

  • Fullerton, California, United States
  • Jan 30th
4 Section Woodturning Collette Chuck Jaws "O" Ring

4 Section Woodturning Collette Chuck Jaws "O" Ring

  • Vancouver, Washington, United States
  • Jan 30th
Seco epb e2502 5875 40400

Seco epb e2502 5875 40400

  • Englewood, Colorado, United States
  • Jan 30th
8” T-NUTS FOR B-208 TYPE CNC LATHE CHUCK JAWS

8” T-NUTS FOR B-208 TYPE CNC LATHE CHUCK JAWS

  • Chino, California, United States
  • Jan 30th
Okuma 3 Jaw Chuck

Okuma 3 Jaw Chuck

  • Jackson, Michigan, United States
  • Jan 30th
DZ BRAND JT6 KEY TYPE DRILL CHUCK

DZ BRAND JT6 KEY TYPE DRILL CHUCK

  • Murfreesboro, Tennessee, United States
  • Jan 30th
DZ BRAND JT6 DRILL CHUCK ARBOR

DZ BRAND JT6 DRILL CHUCK ARBOR

  • Murfreesboro, Tennessee, United States
  • Jan 30th
10" 3 Jaw Chuck from TOS SN-40 Lathe; D1-6 Mount, 2-3/4" Bore, Adjust-Tru

10" 3 Jaw Chuck from TOS SN-40 Lathe; D1-6 Mount, 2-3/4" Bore, Adjust-Tru

  • Rocky Point, New York, United States
  • Jan 30th
Precision ground Magnetic Parrells

Precision ground Magnetic Parrells

  • Bronson, Florida, United States
  • Jan 30th
MACHINIST LATHE TOOLS LOT OF 4 JACOBS DRILL CHUCKS #34, #11N & (2) #32

MACHINIST LATHE TOOLS LOT OF 4 JACOBS DRILL CHUCKS #34, #11N & (2) #32

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
Jacobs No. 8N Super Ball Bearing Chuck 0-1/4" Capacity

Jacobs No. 8N Super Ball Bearing Chuck 0-1/4" Capacity

  • Garden City, Idaho, United States
  • Jan 30th
Speedgrip D2003.5-S 85mm Metric EXPANDING Expandable COLLET CHUCK Speed Grip

Speedgrip D2003.5-S 85mm Metric EXPANDING Expandable COLLET CHUCK Speed Grip

  • Freehold, New Jersey, United States
  • Jan 30th

People who viewed this item also vieved

Adjustable Sliding/Angle Fixturing Block 4-1/4 x 3 inch with 2 x 3/4 inch slot

Adjustable Sliding/Angle Fixturing Block 4-1/4 x 3 inch with 2 x 3/4 inch slot

  • Palos Hills, Illinois, United States
  • May 31st
208" x 36"x 8" Steel Acorn Welding T-Slot Table Cast Iron Layout Plate Fixture

208" x 36"x 8" Steel Acorn Welding T-Slot Table Cast Iron Layout Plate Fixture

  • Grand Rapids, Michigan, United States
  • May 31st
35.375" x 16.125" x 5" Steel Weld T-Slot Table Cast iron Layout Plate Fixture

35.375" x 16.125" x 5" Steel Weld T-Slot Table Cast iron Layout Plate Fixture

  • Grand Rapids, Michigan, United States
  • May 31st
NICE LOT OF 2MT DEAD CENTER W. 2MT EXTENSION 2MT ADJUSTABLE REAMER 1 1/8 1 1/4

NICE LOT OF 2MT DEAD CENTER W. 2MT EXTENSION 2MT ADJUSTABLE REAMER 1 1/8 1 1/4

  • Pomona, California, United States
  • Jun 2nd
NICE ROHM 2MT LIVE CENTER MK2

NICE ROHM 2MT LIVE CENTER MK2

  • Pomona, California, United States
  • Jun 2nd
MACHINIST LATHE MILL Machinist for Schaublin Lathe Rotor Live Center C SV 102

MACHINIST LATHE MILL Machinist for Schaublin Lathe Rotor Live Center C SV 102

  • Morris Plains, New Jersey, United States
  • Jun 2nd
LYNDEX B3506-1000 1" - 3.50" END MILL HOLDER

LYNDEX B3506-1000 1" - 3.50" END MILL HOLDER

  • Chicago, Illinois, United States
  • Jun 2nd
LOT OF HARDINGE 5DS 5C COLLET STOPS

LOT OF HARDINGE 5DS 5C COLLET STOPS

  • California, United States
  • Jun 2nd
HARDINGE 5C 1/16" ROUND COLLET STK 7519

HARDINGE 5C 1/16" ROUND COLLET STK 7519

  • Wadley, Alabama, United States
  • Jun 2nd
Manchester 435157 Clamps for Indexables Type: Clamp Series: Separator

Manchester 435157 Clamps for Indexables Type: Clamp Series: Separator

  • New Bedford, Massachusetts, United States
  • Jun 3rd
Shaft Clamp Collars Threaded 2-12 x 3"OD x 11/16"w Black Oxide

Shaft Clamp Collars Threaded 2-12 x 3"OD x 11/16"w Black Oxide

  • New Bedford, Massachusetts, United States
  • Jun 3rd
Gibraltar Carbon Steel Pull Action Latch Clamp 4000 lb Capacity GIB-LU-404-1

Gibraltar Carbon Steel Pull Action Latch Clamp 4000 lb Capacity GIB-LU-404-1

  • Venice, Florida, United States
  • Jun 3rd
Jacob # 75 Machinist Cross Slide Drill Press Milling Machine Vise

Jacob # 75 Machinist Cross Slide Drill Press Milling Machine Vise

  • Cary, North Carolina, United States
  • Jun 5th
Sears Craftsman Tilting Drill Press Milling Machine Vise

Sears Craftsman Tilting Drill Press Milling Machine Vise

  • Cary, North Carolina, United States
  • Jun 5th
Machinist Cross Slide Vise

Machinist Cross Slide Vise

  • Temecula, California, United States
  • Jun 5th
MACHINIST TOOLS MILL LATHE Machinist Lot of Brass and Copper Lot

MACHINIST TOOLS MILL LATHE Machinist Lot of Brass and Copper Lot

  • Morris Plains, New Jersey, United States
  • Jun 15th
Brown & Sharpe 599-749 "V"Block and clamp Machinist Tool V BLOCK Mint In Box

Brown & Sharpe 599-749 "V"Block and clamp Machinist Tool V BLOCK Mint In Box

  • Hamlin, New York, United States
  • Jun 15th
MACHINIST TOOLS LATHE MILL Machinist Lot of Mandrels

MACHINIST TOOLS LATHE MILL Machinist Lot of Mandrels

  • Morris Plains, New Jersey, United States
  • Jun 15th
"Karbonz Fixed Circular Needles 16""-Size 1.5/2.5mm"

"Karbonz Fixed Circular Needles 16""-Size 1.5/2.5mm"

  • Hickory Hills, Illinois, United States
  • Jun 20th
South Bend Heavy 10 5-c collet closer, rack, handwheel, hardinge collets AWESOME

South Bend Heavy 10 5-c collet closer, rack, handwheel, hardinge collets AWESOME

  • Lebanon, Pennsylvania, United States
  • Jun 20th
"Nova Platina Double Pointed Needles 8""-Size 3/3.25mm"

"Nova Platina Double Pointed Needles 8""-Size 3/3.25mm"

  • Hickory Hills, Illinois, United States
  • Jun 20th
100w Co2 Laser Engraver 1000mm/S Rotary Axis 3-Jaw Usb Disk Cutting A-Axis

100w Co2 Laser Engraver 1000mm/S Rotary Axis 3-Jaw Usb Disk Cutting A-Axis

  • Ontario, California, United States
  • Oct 19th
Precision Indexer Rotary Table 3 Jaw Chuck Vertical & Horizontal 8" milling mach

Precision Indexer Rotary Table 3 Jaw Chuck Vertical & Horizontal 8" milling mach

  • Temple City, California, United States
  • Oct 20th
NICE Haas 5C 4th Axis CNC Rotary Indexer with S5C Controller 17-Pin, Air Closer

NICE Haas 5C 4th Axis CNC Rotary Indexer with S5C Controller 17-Pin, Air Closer

  • Hopkins, Minnesota, United States
  • Oct 20th
Machine Tool Parts (Bearings)

Machine Tool Parts (Bearings)

  • Arlington Heights, Illinois, United States
  • Oct 23rd
kitagawa Hydraulic Cylinder Actuator F0827 Refurbished Unit-With Exchange $900

kitagawa Hydraulic Cylinder Actuator F0827 Refurbished Unit-With Exchange $900

  • Lake Elsinore, California, United States
  • Oct 24th
machinist tools

machinist tools

  • Ventura, California, United States
  • Oct 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies