+ Post new Ad
Electric Motors & Specialties ESP 1650 RPM 50WO 208-230V CW 50/60HZ .75A FRESHIP, US $59.99 – Picture 0
Electric Motors & Specialties ESP 1650 RPM 50WO 208-230V CW 50/60HZ .75A FRESHIP, US $59.99 – Picture 0

Electric Motors & Specialties Esp 1650 Rpm 50wo 208-230v Cw 50/60hz .75a Freship

US $59.99

  • Sidney, Ohio, United States
  • Jan 29th
Open on mobile:
QR code
THIS IS FOR (1) ONE NEW OLD STOCK ESP ELECTRIC MOTORS & SPECIALTIES MOTOR ON A STAND THIS WAS REMOVED FORM A PIECE OF TEST EQUIPMENT THAT WAS NEVER USED THIS WAS TESTED AND RUNS GREAT IT DOES HAVE SOME MINOR SCRATCHES ON THE PAINT THE MOTOR IS MADE OUT OF CAST IRON I HAVE 2 THAT ARE IDENTICAL FROM THE SAME EQUIPMENT IT IS MARKED AS FOLLOWS: ELECTRIC MOTORS AND SPECIALTIES GARRETT, INDIANA UTAGH 1652BH3 50 WO, 208-230V, CW 1650 RPM, 60/50 HZ, .75A CLASS A, 40 C AMB 0445-00 PAT. 7683560 E13 E128044 SEE MY PICTURES OF THE ITEM YOU ARE BIDDING ON-AS BOTH ARE IDENTICAL AND ALL THE SAME SPECS THE STAND IS APPROX 5" TALL X 1 1/2" WIDE THE STAND IS HELD ON BY 4 BOLTS AND CAN BE REMOVED VERY EASY FREE SHIPPING IN THE U.S.A.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “THESE ARE NEW OLD STOCK THAT WAS REMOVED FORM A PIECE OF TEST EQUIPMENT THAT WAS NEVER USED AT A FACTORY-THEY HAVE SOME PAINT SCRATCHES-ETC”

Directions

Similar products from Spare Parts & Additional Accessories

LOT 30 NEW HELWIG 6677 4-85 CARBON MOTOR BRUSH 2-3/8X1-1/2X3/8IN B344354

LOT 30 NEW HELWIG 6677 4-85 CARBON MOTOR BRUSH 2-3/8X1-1/2X3/8IN B344354

  • Buffalo, New York, United States
  • Jan 29th
NEW MARTIN MODEL 10JEM QUADRA-FLEX COUPLING CPLG SLEEVE

NEW MARTIN MODEL 10JEM QUADRA-FLEX COUPLING CPLG SLEEVE

  • La Puente, California, United States
  • Jan 29th
Brush set for Delta saws 5/8" x 1/4" face, motor brushes (two brushes)

Brush set for Delta saws 5/8" x 1/4" face, motor brushes (two brushes)

  • Dublin, California, United States
  • Jan 29th
LOT 10 NEW HELWIG 1537700 CARBON MOTOR BRUSH 3X1-1/4X3/4IN B344363

LOT 10 NEW HELWIG 1537700 CARBON MOTOR BRUSH 3X1-1/4X3/4IN B344363

  • Buffalo, New York, United States
  • Jan 29th
LOT 7 NEW HELWIG 1537700 CARBON MOTOR BRUSH 3X1-1/4X3/4IN B344369

LOT 7 NEW HELWIG 1537700 CARBON MOTOR BRUSH 3X1-1/4X3/4IN B344369

  • Buffalo, New York, United States
  • Jan 29th
Browning 2 Groove V-Belt Pulley with 13/8 bushing for same

Browning 2 Groove V-Belt Pulley with 13/8 bushing for same

  • McDonough, Georgia, United States
  • Jan 29th
New-No Box 3 INCH Union/ Rigid Coupling Manufacturer Unknown GREAT SHAPE

New-No Box 3 INCH Union/ Rigid Coupling Manufacturer Unknown GREAT SHAPE

  • Clarkston, Michigan, United States
  • Jan 29th
TB WOOD'S V-Belt Pulley, QD, 5.4 In OD, 4 Groove, Model 504C

TB WOOD'S V-Belt Pulley, QD, 5.4 In OD, 4 Groove, Model 504C

  • Orland Park, Illinois, United States
  • Jan 29th
FALK 1203686 STEELFLEX FLEX GEAR UNBORED COUPLING RSB 10 IN HUB B344416

FALK 1203686 STEELFLEX FLEX GEAR UNBORED COUPLING RSB 10 IN HUB B344416

  • Buffalo, New York, United States
  • Jan 29th
Micropump 81435 Brush Kit New

Micropump 81435 Brush Kit New

  • Guayama, Puerto Rico, United States
  • Jan 29th
New Intralox Sprocket S3E1 H2CEK1 LS 1100 Series Sprocket Square Bore

New Intralox Sprocket S3E1 H2CEK1 LS 1100 Series Sprocket Square Bore

  • Atlanta, Georgia, United States
  • Jan 29th
Dayton Model 3XA79 DC Gear Motor 90 RPM 1/8 hp - 90VDC Used Mint Condition

Dayton Model 3XA79 DC Gear Motor 90 RPM 1/8 hp - 90VDC Used Mint Condition

  • Berne, Indiana, United States
  • Jan 29th
Protection Controls P-C II PCII UV Scanner

Protection Controls P-C II PCII UV Scanner

  • Berne, Indiana, United States
  • Jan 29th
HEIDELBERG TR-4A-SG PC BOARD 227-794-01-00 TR4ASG Used

HEIDELBERG TR-4A-SG PC BOARD 227-794-01-00 TR4ASG Used

  • Berne, Indiana, United States
  • Jan 29th
LOT 9 NEW SIG 54912102 CARBON MOTOR BRUSH ASSEMBLY D344754

LOT 9 NEW SIG 54912102 CARBON MOTOR BRUSH ASSEMBLY D344754

  • Delta, Ohio, United States
  • Jan 29th
(L27-5) AMBITECH SS-4G-5 ELECTRONIC MOTOR BRAKE

(L27-5) AMBITECH SS-4G-5 ELECTRONIC MOTOR BRAKE

  • Cleveland, Ohio, United States
  • Jan 29th
(A7) PERMA-TORK HC4-4 TORQUE CLUTCH

(A7) PERMA-TORK HC4-4 TORQUE CLUTCH

  • Cleveland, Ohio, United States
  • Jan 29th
Air cooled 2.2kw spindle motor ER20 and inverter drive

Air cooled 2.2kw spindle motor ER20 and inverter drive

  • Jonesboro, Arkansas, United States
  • Jan 29th
(N1-3) 1 NEW STEARNS 1-087-051-00-HBF BRAKE ASSEMBLY

(N1-3) 1 NEW STEARNS 1-087-051-00-HBF BRAKE ASSEMBLY

  • Cleveland, Ohio, United States
  • Jan 29th
Guehring Carbide Drill 5511 9955110055600 5.56mm Coolant Through Drill Used!!

Guehring Carbide Drill 5511 9955110055600 5.56mm Coolant Through Drill Used!!

  • Novi, Michigan, United States
  • Jan 29th

People who viewed this item also vieved

Gates 2290 Belt

Gates 2290 Belt

  • Scranton, Pennsylvania, United States
  • Feb 15th
Gates 1270 Belt

Gates 1270 Belt

  • Scranton, Pennsylvania, United States
  • Feb 15th
Boston Gear F715-5-B5-H right angle worm speed reducer 5:1 ratio NIB

Boston Gear F715-5-B5-H right angle worm speed reducer 5:1 ratio NIB

  • Kunkletown, Pennsylvania, United States
  • Feb 15th
Reliance 1/2-Hp Motor & Dodge Tigear 20:1 Speed Reducer GearBox Torque:553 3-Ph

Reliance 1/2-Hp Motor & Dodge Tigear 20:1 Speed Reducer GearBox Torque:553 3-Ph

  • Leander, Texas, United States
  • Feb 15th
100R Roller Chain Connecting Link

100R Roller Chain Connecting Link

  • Laurinburg, North Carolina, United States
  • Feb 15th
Morse 25R Roller Chain, 10'

Morse 25R Roller Chain, 10'

  • Laurinburg, North Carolina, United States
  • Feb 15th
VINTAGE BOSTON Input RPM 1750 Ratio 30 Output Torque 240 inch lbs. GEAR REDUCER

VINTAGE BOSTON Input RPM 1750 Ratio 30 Output Torque 240 inch lbs. GEAR REDUCER

  • Norborne, Missouri, United States
  • Feb 15th
GATES 5-M-690 NEW BELT FITS EMCO COMPACT LATHE

GATES 5-M-690 NEW BELT FITS EMCO COMPACT LATHE

  • Denver, Colorado, United States
  • Feb 15th
TACKE GEAR REDUCER TNA-250

TACKE GEAR REDUCER TNA-250

  • Alpena, Michigan, United States
  • Feb 15th
New Durst Off Highway Pump Drive KF001207

New Durst Off Highway Pump Drive KF001207

  • Strafford, Missouri, United States
  • Feb 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies