Ellis Manufacturing Ellis Timber Jack 4 X 4 Post Shore

US $45.12

  • Suwanee, Georgia, United States
  • Jan 31st
4x4 Timber Jack Load Capacity: 15,000 Lbs / 7.5 Tons Overall Height: 9-1/8" Range of Adustment: 5" Lifting Capacity: 4000 Lbs / 2 Tons Part No. TJ-4 To Assemble: Drill 1-1/4" x 6" hole using auger drill bit into center of lumber to accept 1-1/4" Acme threaded screw. Position Timber Jack so the Acme screw will slide into the predrilled hole in lumber. Adjust the top plate so all 4 mounting holes line up within the boundaries of the lumber. Drill 4 - 5/32"x1" holes through the mounting holes in the top plate and into the lumber. Insert 4 - 1/4"x1-1/2" lag screws through the mounting holes in the top plate into the predrilled holes in the lumber and tighten. Attach Ellis Purlin Splicer to Beam or Joist where support is desired. Slip 4x4 or 6x6 lumber attached to the Timber Jack into the square tubing of the purlin splicer and secure with nails through the holes provided. Adjustment to Timber Jack can be made by turning "U" shaped handle at bottom of screw. Acme threads are greased for easy adjustment. Attach base plate to a solid foundation through the 4 holes provided.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Ellis Manufacturing
MPN TJ-4
Model Ellis Timber Jack 4x4

Directions

Similar products from Mixers - Concrete & Mortar

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies