+ Post new Ad
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 0
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 1
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 2
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 3
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 4
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 5
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 6
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 7
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 8
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 0
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 1
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 2
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 3
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 4
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 5
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 6
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 7
ENCO >>>Milling / Drilling Machine, Stand & Accessories<<<, US $3,190.00 – Picture 8

Enco >>>milling / Drilling Machine, Stand & Accessories<<<

US $3,190.00

  • Hopkins, Minnesota, United States
  • Jan 30th
Open on mobile:
QR code
Any Machinist dream!  - Excellent condition, only 20 hrs used since 1990 - tight and accurate!  Bench mount with stand and drawers, on casters.  Comes with over 90 attachments  including new and used two and four flute end mills, involute gear cutters, slotting cutters, ENCO 52 piece clamping kit,  two vises, drill chuck, various cutting attachments, 4 collets. The pulley head cover is missing. Some surface rust. This is from my fathers tool collection. He was a direct decedent of  Daniel Best the founder of Caterpillar Tractor Co. So there's even a little history that goes along with this. _______________________________________ Machine Type: Mill Drill Combination Table Length: 28” Table Width: 8-1/4 Longitude Travel: 18-1/8 Cross Travel: 6-1/4 Horsepower: 1-1/2 Voltage: 110/120 (Wired for 110 now) Phase: 1
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Surface rust, missing pulley cover, minor paint peel”

Directions

Similar products from Tools for Milling Machines

Sonnet Counterbore Step Drill Chamfer Bit Milling Machine Drill Machinist Tool

Sonnet Counterbore Step Drill Chamfer Bit Milling Machine Drill Machinist Tool

  • Yorktown, Virginia, United States
  • Jan 30th
Sandvik Thru Tool Coolant Adaptor A416.1-803-M-1 - CNC HAAS MORI MAZAK

Sandvik Thru Tool Coolant Adaptor A416.1-803-M-1 - CNC HAAS MORI MAZAK

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
ALBRECHT 1/32 to 1/2 ( 13mm ) KEYLESS DRILL CHUCK W/ J33 JACOBS TAPER

ALBRECHT 1/32 to 1/2 ( 13mm ) KEYLESS DRILL CHUCK W/ J33 JACOBS TAPER

  • Chino, California, United States
  • Jan 30th
large tapping head with 1 collet @ 3/8&#034;.usa

large tapping head with 1 collet @ 3/8".usa

  • Woburn, Massachusetts, United States
  • Jan 30th
ALBRECHT 3/8&#034; ( 10mm ) KEYLESS DRILL CHUCK W/ 1/2&#034; STRAIGHT SHANK

ALBRECHT 3/8" ( 10mm ) KEYLESS DRILL CHUCK W/ 1/2" STRAIGHT SHANK

  • Chino, California, United States
  • Jan 30th
ALBRECHT 3/8&#034; ( 10mm ) KEYLESS DRILL CHUCK W/ J33 JACOBS TAPER

ALBRECHT 3/8" ( 10mm ) KEYLESS DRILL CHUCK W/ J33 JACOBS TAPER

  • Chino, California, United States
  • Jan 30th
Wells Index CNC Vertical Mill

Wells Index CNC Vertical Mill

  • Dearborn, Michigan, United States
  • Jan 30th
Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine

  • Morro Bay, California, United States
  • Jan 30th
ALBRECHT 1/2&#034; ( 13mm ) KEYLESS DRILL CHUCK W/ 5/8&#034; STRAIGHT SHANK

ALBRECHT 1/2" ( 13mm ) KEYLESS DRILL CHUCK W/ 5/8" STRAIGHT SHANK

  • Chino, California, United States
  • Jan 30th
IMMACULATE! ALBRECHT 1/2&#034; ( 13mm ) KEYLESS DRILL CHUCK W/ 5/8&#034; STRAIGHT SHANK

IMMACULATE! ALBRECHT 1/2" ( 13mm ) KEYLESS DRILL CHUCK W/ 5/8" STRAIGHT SHANK

  • Chino, California, United States
  • Jan 30th
ALBRECHT 1/2&#034; ( 13mm ) KEYLESS DRILL CHUCK W/ 5/8&#034; STRAIGHT SHANK FOR MILL PRESS

ALBRECHT 1/2" ( 13mm ) KEYLESS DRILL CHUCK W/ 5/8" STRAIGHT SHANK FOR MILL PRESS

  • Chino, California, United States
  • Jan 30th
ALBRECHT 3/8&#034; ( 10mm ) KEYLESS DRILL CHUCK W/ 1/2&#034; STRAIGHT SHANK FOR MILL PRESS

ALBRECHT 3/8" ( 10mm ) KEYLESS DRILL CHUCK W/ 1/2" STRAIGHT SHANK FOR MILL PRESS

  • Chino, California, United States
  • Jan 30th
5PN Collets

5PN Collets

  • Kent, Washington, United States
  • Jan 30th
FLY-CUTTER HEAD WITH 12 X 1 THREAD TOOLSTEEL FOR UNIMAT SL 1000 AND DB 200

FLY-CUTTER HEAD WITH 12 X 1 THREAD TOOLSTEEL FOR UNIMAT SL 1000 AND DB 200

  • Miami, Florida, United States
  • Jan 30th
ALBRECHT 1/4&#034; ( 6.5mm ) KEYLESS DRILL CHUCK W/ 1/2&#034; SHANK FOR MILL PRESS

ALBRECHT 1/4" ( 6.5mm ) KEYLESS DRILL CHUCK W/ 1/2" SHANK FOR MILL PRESS

  • Chino, California, United States
  • Jan 30th
ALBRECHT 5/16&#034; ( 8mm ) KEYLESS DRILL CHUCK W/ 1/2&#034; SHANK FOR MILL PRESS

ALBRECHT 5/16" ( 8mm ) KEYLESS DRILL CHUCK W/ 1/2" SHANK FOR MILL PRESS

  • Chino, California, United States
  • Jan 30th
Hardinge UM-TM low-high speed handles and parts

Hardinge UM-TM low-high speed handles and parts

  • Gatineau, Quebec, Canada
  • Jan 30th
USED INVOLUTE GEAR CUTTER #1 6.283P 1/2P 135-Rack 7/8&#034; bore HSS Brown And Sharpe

USED INVOLUTE GEAR CUTTER #1 6.283P 1/2P 135-Rack 7/8" bore HSS Brown And Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
Milling Stop / Part Locater for Taig Sherline Harbour Freight Emco type mills

Milling Stop / Part Locater for Taig Sherline Harbour Freight Emco type mills

  • Oakville, Ontario, Canada
  • Jan 30th
Sandvik Indexable Milling Cutter Face Mill RA290 Series Square Shoulder

Sandvik Indexable Milling Cutter Face Mill RA290 Series Square Shoulder

  • West Chester, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

Atlas 618 Craftsman 101 109 6&#034; Lathe 44 Tooth Teeth Gear 3/8&#034; Thick 1/2&#034; Bore

Atlas 618 Craftsman 101 109 6" Lathe 44 Tooth Teeth Gear 3/8" Thick 1/2" Bore

  • Youngstown, Ohio, United States
  • May 24th
6&#034; Atlas 618 Craftsman 101 Lathe M6-101-44 Tooth Teeth Gear 1/2&#034; Bore 109 10100

6" Atlas 618 Craftsman 101 Lathe M6-101-44 Tooth Teeth Gear 1/2" Bore 109 10100

  • Youngstown, Ohio, United States
  • May 24th
Atlas 618 Craftsman 101 109 6&#034; Lathe M6-101-54 Tooth Teeth Gear 1/2&#034; Bore

Atlas 618 Craftsman 101 109 6" Lathe M6-101-54 Tooth Teeth Gear 1/2" Bore

  • Youngstown, Ohio, United States
  • May 24th
deckel cutter grinder deckel so index head deckel so cutter grinder engraver

deckel cutter grinder deckel so index head deckel so cutter grinder engraver

  • Etobicoke, Ontario, Canada
  • May 28th
MACHINIST TOOLS LATHE MILL Machinist Harig # 1 Grind All Grindall

MACHINIST TOOLS LATHE MILL Machinist Harig # 1 Grind All Grindall

  • Morris Plains, New Jersey, United States
  • May 28th
SMALL MACHINIST I BEAMS SETUP PARALLELS TOOLMAKER TOOLING GRINDING JIG FIXTURE

SMALL MACHINIST I BEAMS SETUP PARALLELS TOOLMAKER TOOLING GRINDING JIG FIXTURE

  • Waterford, Michigan, United States
  • May 28th
Midwest P6716L Pliers

Midwest P6716L Pliers

  • Lynnfield, Massachusetts, United States
  • May 28th
Ideal 80-461F Resurfacer, 1&#034; X 2&#034; X 8&#034;, F Grade

Ideal 80-461F Resurfacer, 1" X 2" X 8", F Grade

  • Abingdon, Maryland, United States
  • May 28th
Dial push-pull guage model DPP by Chatillon

Dial push-pull guage model DPP by Chatillon

  • Titusville, Pennsylvania, United States
  • May 28th
VERTICAL BANDSAW BY MARVEL SAW SERIES 8

VERTICAL BANDSAW BY MARVEL SAW SERIES 8

  • Berea, Ohio, United States
  • May 29th
VERTICAL BANDSAW BY MARVEL

VERTICAL BANDSAW BY MARVEL

  • Berea, Ohio, United States
  • May 29th
HEM Wide Flange Band Saw 20” x 44” 220/440v Model WF140HM-DC

HEM Wide Flange Band Saw 20” x 44” 220/440v Model WF140HM-DC

  • Glassboro, New Jersey, United States
  • May 29th
Hanson Tool 71432S Drill Bits 1/2&#034; , 1/4&#034; RS - Black - Qty 15

Hanson Tool 71432S Drill Bits 1/2" , 1/4" RS - Black - Qty 15

  • Winter Haven, Florida, United States
  • May 29th
VERY CLEAN MILMAN T100B MULTIPLE PITCH AUTOMATIC LEAD SCREW TAPPING MACHINE

VERY CLEAN MILMAN T100B MULTIPLE PITCH AUTOMATIC LEAD SCREW TAPPING MACHINE

  • Rancho Cucamonga, California, United States
  • May 29th
TAPMATIC SPD5 TAPPING HEAD #6 1/2&#034; CAPACITY STK 4858

TAPMATIC SPD5 TAPPING HEAD #6 1/2" CAPACITY STK 4858

  • Wadley, Alabama, United States
  • May 29th
Charmilles 270 mm scale

Charmilles 270 mm scale

  • Anoka, Minnesota, United States
  • May 30th
Charmilles axis scale Heidenhain 4020 wire

Charmilles axis scale Heidenhain 4020 wire

  • Anoka, Minnesota, United States
  • May 30th
Charmilles pulleys 290 310 300 4020 2020

Charmilles pulleys 290 310 300 4020 2020

  • Anoka, Minnesota, United States
  • May 30th
100 Ton 21&#034; x 27&#034; PHI Hydraulic Press.

100 Ton 21" x 27" PHI Hydraulic Press.

  • Grand Rapids, Michigan, United States
  • May 31st
TABLE TOP RIVETER BY ATLAS TACK L106 (8233)

TABLE TOP RIVETER BY ATLAS TACK L106 (8233)

  • Chicago, Illinois, United States
  • May 31st
17 Malco &amp; Other Bending Tools Crimpers Hand Brake Cutters Tinsmith Duct Work

17 Malco & Other Bending Tools Crimpers Hand Brake Cutters Tinsmith Duct Work

  • Wilsey, Kansas, United States
  • May 31st
Sunnen Stones L20-A59

Sunnen Stones L20-A59

  • Halls, Tennessee, United States
  • Jun 1st
Sunnen Stones L20-A63, lot of 4

Sunnen Stones L20-A63, lot of 4

  • Halls, Tennessee, United States
  • Jun 1st
Sunnen Stones K16-A47 , lot of 8

Sunnen Stones K16-A47 , lot of 8

  • Halls, Tennessee, United States
  • Jun 1st
J&amp;L Jones &amp; Lamson Die Head Model 18SA 5/8 Shank w/9/16 Cutters

J&L Jones & Lamson Die Head Model 18SA 5/8 Shank w/9/16 Cutters

  • Oregon, Ohio, United States
  • Jun 5th
LANDMATIC 5A401-1 5/8&#034; Die Head 3/4&#034; Shank

LANDMATIC 5A401-1 5/8" Die Head 3/4" Shank

  • Oregon, Ohio, United States
  • Jun 5th
J&amp;L Jones &amp; Lamson Die Head Model 19S 1&#034; Shank

J&L Jones & Lamson Die Head Model 19S 1" Shank

  • Oregon, Ohio, United States
  • Jun 5th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies