+ Post new Ad
End mill 2 pcs two flute carbide TCT 8 mm flat and ball end set 55deg HRC 55, US $37.24 – Picture 0
End mill 2 pcs two flute carbide TCT 8 mm flat and ball end set 55deg HRC 55, US $37.24 – Picture 0

End Mill 2 Pcs Two Flute Carbide Tct 8 Mm Flat And Ball End Set 55deg Hrc 55

US $37.24

  • Keratsini, Attiki, Greece
  • Mar 6th
Open on mobile:
QR code
End mill cutter 2-flute two flute solid carbide TCT 8 mm flat end 55deg HRC 55   - 1 piece AND End mill cutter 2-flute two flute solid carbide TCT 8 mm flat end 55deg HRC 55 - 1 piece 2F-D8*60-55deg TiAlN Coated Material: Carbide K30-K40 Returns accepted   Side Mill Cutting   Ae<1.6mm Ap<12mm Aluminum Alloy, Cuprum Carbon steel, Cast iron,...(30HRC) Alloy steel, Die steel ( <35HRC) Stainless steel, Titanium ( < 55HRC) Rev ( rpm ) 6400 3200 1920 1600 Cutting speed ( mm/min ) 800 360 192 176 Slotting   Ae=8mm Ap<4mm Aluminum Alloy, Cuprum Carbon steel, Cast iron,...(30HRC) Alloy steel, Die steel ( <35HRC) Hardened Steel, Stainless steel, Titanium ( < 55HRC) Rev ( rpm ) 6400 3200 1920 1280 Cutting speed ( mm/min ) 640 288 152 104 The values Ae, Ap are the maximum recommended for this tool and material The above speeds and feeds refer only to the values of Ae,Ap mentioned. On lowering Ap, Ae the speeds can go higher. TiAlN coatings may have reduced life on cutting aluminum alloys.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material TCT

Directions

Similar products from End Mills Router & Drill Bits

Bassett brand 1/2 4FL ball nose carbide end mill with .375 shank 52345 MSE

Bassett brand 1/2 4FL ball nose carbide end mill with .375 shank 52345 MSE

  • Trempealeau, Wisconsin, United States
  • Mar 6th
Garr 1/2 4FL solid carbide end mill 230M 11310 lot of 6 new

Garr 1/2 4FL solid carbide end mill 230M 11310 lot of 6 new

  • Trempealeau, Wisconsin, United States
  • Mar 6th
LOT of (8) END MILLS, BALL END, 5/16&#034; to 2&#034; Diameters

LOT of (8) END MILLS, BALL END, 5/16" to 2" Diameters

  • Bremen, Indiana, United States
  • Mar 6th
Kennametal SLEC188S2 KC610M carbide 2FL 3/16 end mill lot of 8 new

Kennametal SLEC188S2 KC610M carbide 2FL 3/16 end mill lot of 8 new

  • Trempealeau, Wisconsin, United States
  • Mar 6th
YG YG1 4 fl Ex long carbide end mills 1/8x1/8 lot of 8 CNC mill

YG YG1 4 fl Ex long carbide end mills 1/8x1/8 lot of 8 CNC mill

  • Trempealeau, Wisconsin, United States
  • Mar 6th
Micro 100 Super Carbide BMS 022-2 END MILL Ball Nose NEW

Micro 100 Super Carbide BMS 022-2 END MILL Ball Nose NEW

  • Cerritos, California, United States
  • Mar 6th
Micro 100 Super Carbide BMS 026-2 END MILL Ball Nose NEW

Micro 100 Super Carbide BMS 026-2 END MILL Ball Nose NEW

  • Cerritos, California, United States
  • Mar 6th
7/8 High Speed end mill &#034;new&#034;

7/8 High Speed end mill "new"

  • Ontario, California, United States
  • Mar 6th
DYNA 2400 cnc machine

DYNA 2400 cnc machine

  • Alvin, Texas, United States
  • Mar 6th
End mill router 1-flute one flute HSS E 8mm 2 pcs lot

End mill router 1-flute one flute HSS E 8mm 2 pcs lot

  • Keratsini, Attiki, Greece
  • Mar 6th
morse taper #1 8mm 2 flute end mill HSS

morse taper #1 8mm 2 flute end mill HSS

  • Keratsini, Attiki, Greece
  • Mar 6th
End mill 6mm diamond abrasive ceramics glass cutter tool 9mm arbor 2pcs lot

End mill 6mm diamond abrasive ceramics glass cutter tool 9mm arbor 2pcs lot

  • Keratsini, Attiki, Greece
  • Mar 6th
woodruff seating cutter key keyseat 40mm diameter 20mm shaft 8mm width HSS mill

woodruff seating cutter key keyseat 40mm diameter 20mm shaft 8mm width HSS mill

  • Keratsini, Attiki, Greece
  • Mar 6th
1 piece Carbide PCB Engraving Bits CNC Router tool 15° 0.1mm Dia 33mm length

1 piece Carbide PCB Engraving Bits CNC Router tool 15° 0.1mm Dia 33mm length

  • Shanghai Door to Door Service, China
  • Mar 6th
1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 1.6mm

1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 1.6mm

  • Shanghai Door to Door Service, China
  • Mar 6th
1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 2.0mm

1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 2.0mm

  • Shanghai Door to Door Service, China
  • Mar 6th
TIALN 6mm SOLID CARBIDE End Mill Coating HRC 55 Cutting, Tungsten Carbide

TIALN 6mm SOLID CARBIDE End Mill Coating HRC 55 Cutting, Tungsten Carbide

  • Shanghai Door to Door Service, China
  • Mar 6th
2MM (R1) X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE BALL ENDMILL 5x

2MM (R1) X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE BALL ENDMILL 5x

  • --, Hong Kong
  • Mar 6th
3/8 4 Flute Centercutting Ball Nose Carbide End Mill TiCN Coated NEW AccuPro 1pc

3/8 4 Flute Centercutting Ball Nose Carbide End Mill TiCN Coated NEW AccuPro 1pc

  • Hastings, Michigan, United States
  • Mar 5th
9 Pcs. ISCAR HFPL 5025 IC20 K10 CARBIDE INSERTS (SN 3)

9 Pcs. ISCAR HFPL 5025 IC20 K10 CARBIDE INSERTS (SN 3)

  • Tel Aviv, Israel
  • Mar 5th

People who viewed this item also vieved

Federal 1.00&#034; Broach

Federal 1.00" Broach

  • Endicott, New York, United States
  • Jan 30th
Federal 5mm Broach

Federal 5mm Broach

  • Endicott, New York, United States
  • Jan 30th
¤¤PARTING GROOVING¤¤ISCAR 50pcs.of ISCAR DGN 2202C IC354 inserts+original packs

¤¤PARTING GROOVING¤¤ISCAR 50pcs.of ISCAR DGN 2202C IC354 inserts+original packs

  • BG, Serbia
  • Jan 30th
PH HORN CARBIDE INSERTS (QTY1) RU108.0.015.31 TN35

PH HORN CARBIDE INSERTS (QTY1) RU108.0.015.31 TN35

  • Grand Rapids, Michigan, United States
  • Jan 30th
Ceratip TNG 433 Ceramic Insert

Ceratip TNG 433 Ceramic Insert

  • Johnson City, New York, United States
  • Jan 30th
Ceratip RNG 43T00625 A66N Ceramic Insert

Ceratip RNG 43T00625 A66N Ceramic Insert

  • Johnson City, New York, United States
  • Jan 30th
12 NEW 1/8&#034; SHANK CARBIDE BURRS. GREAT VARIETY OF SHAPES. LONGS. USA MADE {F81}

12 NEW 1/8" SHANK CARBIDE BURRS. GREAT VARIETY OF SHAPES. LONGS. USA MADE {F81}

  • Mentor, Ohio, United States
  • Jan 30th
10 NEW 1/8&#034; SHANK CARBIDE BURRS. VERY COMMON SHAPES. LONGS. USA MADE {F87}

10 NEW 1/8" SHANK CARBIDE BURRS. VERY COMMON SHAPES. LONGS. USA MADE {F87}

  • Mentor, Ohio, United States
  • Jan 30th
Threading Die Wrench for 4&#034; OD x 1&#034; thick Dies

Threading Die Wrench for 4" OD x 1" thick Dies

  • Coventry, Rhode Island, United States
  • Jan 30th
&#034; GID&#034; Threading Die 5/16&#034;-24 NF

" GID" Threading Die 5/16"-24 NF

  • Coventry, Rhode Island, United States
  • Jan 30th
3/4&#034; BESLY CHUCKING REAMER

3/4" BESLY CHUCKING REAMER

  • Fort Wayne, Indiana, United States
  • Jan 30th
&#034;Q-Cut&#034; Chucking Reamer 7.9mm ( .3110&#034;)--6 flute

"Q-Cut" Chucking Reamer 7.9mm ( .3110")--6 flute

  • Coventry, Rhode Island, United States
  • Jan 30th
Slitting Saw Simonds 6-55/64 x 0.056 x 1-1/4 ID 150 Teeth #8360

Slitting Saw Simonds 6-55/64 x 0.056 x 1-1/4 ID 150 Teeth #8360

  • Resaca, Georgia, United States
  • Jan 30th
PLAIN MILLING CUTTER 4-3/8 OD X 15/32 THICK X 1-1/4 GORHAM HIGH SPEED #8205

PLAIN MILLING CUTTER 4-3/8 OD X 15/32 THICK X 1-1/4 GORHAM HIGH SPEED #8205

  • Resaca, Georgia, United States
  • Jan 30th
Carbide Burr (SC-3L6D) Cylindrical Ball Nose - Double Cut

Carbide Burr (SC-3L6D) Cylindrical Ball Nose - Double Cut

  • Rialto, California, United States
  • Jan 30th
GENERAL NO 9 HOLE CUTTER MACHINIST TOOL

GENERAL NO 9 HOLE CUTTER MACHINIST TOOL

  • Belleville, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies