+ Post new Ad
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 0
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 1
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 2
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 3
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 4
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 5
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 6
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 7
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 8
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 9
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 0
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 1
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 2
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 3
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 4
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 5
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 6
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 7
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 8
End Mill Bit HSC 1" Shank 6 Flute Flutes 1 7/16" 1.437 inch OD 1 1/2" Cut, US $23.50 – Picture 9

End Mill Bit Hsc 1" Shank 6 Flute Flutes 1 7/16" 1.437 Inch Od 1 1/2" Cut

US $23.50

  • Pittsburgh, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
This bit came out of the estate of an old machinist. Shank 1" diameter, 6  Flutes, 1 7/16" diameter bit  1-1/2" Cut. 377 Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Minor surface rust, bit feels sharp, some chipping, pictures will describe best.”

Directions

Similar products from End Mills Router & Drill Bits

2 DEGREE TAPPET REFURBISHED END MILL , LARGE DAI. 9/16" 1/2 SHANK

2 DEGREE TAPPET REFURBISHED END MILL , LARGE DAI. 9/16" 1/2 SHANK

  • Pawtucket, Rhode Island, United States
  • Jan 30th
1 REFURBISHED END MILL .3150 BALL END 3/8 SHANK DIA.

1 REFURBISHED END MILL .3150 BALL END 3/8 SHANK DIA.

  • Pawtucket, Rhode Island, United States
  • Jan 30th
1 NEW 3 DEGREE TAPPET END MILL , 1/8"SMALL DAI. 3/8 SHANK, WOLVERINE

1 NEW 3 DEGREE TAPPET END MILL , 1/8"SMALL DAI. 3/8 SHANK, WOLVERINE

  • Pawtucket, Rhode Island, United States
  • Jan 30th
1 NEW 3/16" DIA. END MILL DOUBLE END 4 FLUT CENTER CUT

1 NEW 3/16" DIA. END MILL DOUBLE END 4 FLUT CENTER CUT

  • Pawtucket, Rhode Island, United States
  • Jan 30th
2 NEW TAPPER END MILLS, 2 DEGREE 1/8" SMALL DIA. 3/4" LENGTH OF CUT

2 NEW TAPPER END MILLS, 2 DEGREE 1/8" SMALL DIA. 3/4" LENGTH OF CUT

  • Pawtucket, Rhode Island, United States
  • Jan 30th
1 NEW BALL END MILL 3/16" DIA. DOUBLE END 3/8" SHANK

1 NEW BALL END MILL 3/16" DIA. DOUBLE END 3/8" SHANK

  • Pawtucket, Rhode Island, United States
  • Jan 30th
Machinist Tool Lot VARIOUS SIZES AND TYPES - ALL SHARP !!!

Machinist Tool Lot VARIOUS SIZES AND TYPES - ALL SHARP !!!

  • Plainville, Connecticut, United States
  • Jan 30th
Machinist Tool: 1 - 1/4" X 1 1/2" long 4 Flute endmill with 3/8" shank.

Machinist Tool: 1 - 1/4" X 1 1/2" long 4 Flute endmill with 3/8" shank.

  • Fife Lake, Michigan, United States
  • Jan 30th
10 freeman pin and bushing sets new endmill

10 freeman pin and bushing sets new endmill

  • Sanford, Maine, United States
  • Jan 30th
Lot of (2) 2-Flute 5/8" & Round Nose Flatted Shank Mill Ends - Nachi & Unknown

Lot of (2) 2-Flute 5/8" & Round Nose Flatted Shank Mill Ends - Nachi & Unknown

  • Mesa, Arizona, United States
  • Jan 30th
End Mill Bit 8 Flute 1 1/4" Cutting length 1.5 inch 1 1/2" Diameter 5" Long

End Mill Bit 8 Flute 1 1/4" Cutting length 1.5 inch 1 1/2" Diameter 5" Long

  • Pittsburgh, Pennsylvania, United States
  • Jan 30th
COL End Mill Bit Carbide Tip Tipped 1" Straight Shank 4 Flute 1.437 inch 5 1/4"

COL End Mill Bit Carbide Tip Tipped 1" Straight Shank 4 Flute 1.437 inch 5 1/4"

  • Pittsburgh, Pennsylvania, United States
  • Jan 30th
Union Twist Drill Co. HSS Cutter 4 x 1-2 Side Cutting Milling MACHINIST TOOL

Union Twist Drill Co. HSS Cutter 4 x 1-2 Side Cutting Milling MACHINIST TOOL

  • Buffalo, New York, United States
  • Jan 30th
Union Butterfield 5110178 Ball Nose Multi Flute End Mill

Union Butterfield 5110178 Ball Nose Multi Flute End Mill

  • Washington, North Carolina, United States
  • Jan 30th
CENTER CUTTING END MILLS size 3/4 x 3/4 flute 4 lot of 2

CENTER CUTTING END MILLS size 3/4 x 3/4 flute 4 lot of 2

  • New Stanton, Pennsylvania, United States
  • Jan 30th
TUNGALOY 3/4 DIA HI-FEED INDEXABLE ENDMILL W/10 CARBIDE INSERTS

TUNGALOY 3/4 DIA HI-FEED INDEXABLE ENDMILL W/10 CARBIDE INSERTS

  • Corona, California, United States
  • Jan 30th
WALTER VALENITE 1" DIA 2FL INDEXABLE ENDMILL ( F4042.UZ26.026.Z02.15)

WALTER VALENITE 1" DIA 2FL INDEXABLE ENDMILL ( F4042.UZ26.026.Z02.15)

  • Corona, California, United States
  • Jan 30th
11 Pc Endmill Lot Osg/sossner

11 Pc Endmill Lot Osg/sossner

  • Rialto, California, United States
  • Jan 30th
Niagara Hss Single Angle Cutter

Niagara Hss Single Angle Cutter

  • Rialto, California, United States
  • Jan 30th
NICE LOT OF 12 HSS SINGLE AND DOUBLE END MILLS 1/32" TO 5/16" PUTNAM

NICE LOT OF 12 HSS SINGLE AND DOUBLE END MILLS 1/32" TO 5/16" PUTNAM

  • Ellington, New York, United States
  • Jan 30th

People who viewed this item also vieved

**SPECIAL** 25pcs NEW WIDIA 9ZE5577D1,GRADE W6-63 CARBIDE INSERTS

**SPECIAL** 25pcs NEW WIDIA 9ZE5577D1,GRADE W6-63 CARBIDE INSERTS

  • Midway City, California, United States
  • Jan 30th
**SPECIAL** 50pcs NEW WIDIA 9ZE5577D1,GRADE W6-63 CARBIDE INSERTS

**SPECIAL** 50pcs NEW WIDIA 9ZE5577D1,GRADE W6-63 CARBIDE INSERTS

  • Midway City, California, United States
  • Jan 30th
Countersinks Lot of 7 Pcs

Countersinks Lot of 7 Pcs

  • Coventry, Rhode Island, United States
  • Jan 30th
Markrite heavy duty Alloy steel stamps lot of 36 1/8 " letters & numbers G10840

Markrite heavy duty Alloy steel stamps lot of 36 1/8 " letters & numbers G10840

  • Springville, Alabama, United States
  • Jan 30th
Whitney 9/16, 7/16, 11/16, 13/16 DIES METAL PUNCH Tool

Whitney 9/16, 7/16, 11/16, 13/16 DIES METAL PUNCH Tool

  • Lexington, North Carolina, United States
  • Jan 30th
Whitney 9/16, 7/16, 11/16, 13/16 1/2" DIES METAL PUNCH Tool

Whitney 9/16, 7/16, 11/16, 13/16 1/2" DIES METAL PUNCH Tool

  • Lexington, North Carolina, United States
  • Jan 30th
R.R.T. Chucking Reamer 1.0005" 8 flt

R.R.T. Chucking Reamer 1.0005" 8 flt

  • Coventry, Rhode Island, United States
  • Jan 30th
"Hannibal" Chucking Reamer 1.0005" 8 Flt

"Hannibal" Chucking Reamer 1.0005" 8 Flt

  • Coventry, Rhode Island, United States
  • Jan 30th
Panasonic Cordless Metal Cutting Saw 15.6v Model #Ey3530

Panasonic Cordless Metal Cutting Saw 15.6v Model #Ey3530

  • Baldwin Park, California, United States
  • Feb 16th
BAND SAW BLADE ECLIPSE100 FT COIL 3/4"W X .032 3TPI

BAND SAW BLADE ECLIPSE100 FT COIL 3/4"W X .032 3TPI

  • Homer City, Pennsylvania, United States
  • Feb 16th
(30pcs) Greenleaf CNGA 433 T1 / CNGA120412T T01 WG-300 Ceramic Insert

(30pcs) Greenleaf CNGA 433 T1 / CNGA120412T T01 WG-300 Ceramic Insert

  • Windsor, Connecticut, United States
  • Feb 21st
Kennametal Kyon insert CNGA 433T0820 KY 3000

Kennametal Kyon insert CNGA 433T0820 KY 3000

  • Bell Buckle, Tennessee, United States
  • Feb 21st
NICE LOT OF 35 HSS MO-MAX TOOL BITS 1/4" TO 1/2"

NICE LOT OF 35 HSS MO-MAX TOOL BITS 1/4" TO 1/2"

  • Ellington, New York, United States
  • Feb 27th
16 KEY SEAT CUTTERS HSS & CARBIDE TOOL BITS machinist tools *D

16 KEY SEAT CUTTERS HSS & CARBIDE TOOL BITS machinist tools *D

  • Thomaston, Connecticut, United States
  • Feb 27th
Dremel 7000 6-Volt Cordless Two-Speed Rotary Tool

Dremel 7000 6-Volt Cordless Two-Speed Rotary Tool

  • Glassboro, New Jersey, United States
  • Mar 29th
Threadwell Little Champ Broach Keyway Set

Threadwell Little Champ Broach Keyway Set

  • Plymouth, Indiana, United States
  • Apr 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies