Enduro™ Elite SM1050-2PF 220V Sewing Machine Servo Motor Positioner &Foot Lift, US $299.99 – Picture 0

Enduro™ Elite SM1050-2PF 220V Sewing Machine Servo Motor Positioner &Foot Lift, US $299.99 – Picture 1

Enduro™ Elite Sm1050-2pf 220v Sewing Machine Servo Motor Positioner &foot Lift

US $299.99

United States
Jan 30th

Open on mobile:
QR code

If you have Singer class 7,Consew 733 or comparable Seiko machine and you want servo motor,this will be your only choice.This is the 1400 Watts /1.87HP servo motor.All other brands comparable motors do not have a strange for this type machines. This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1050-2PF Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can't afford to run a clutch motor any longer. The power and dependability of the brushes Enduro™ Elite SM1050-2PF is exceptional. This workhorse just won't quit.The Enduro™ Elite SM1050-2PF Servo Motor is designed to meet almost all basic heavy duty and continuous use requirements of various industrial sewing machines. It utilizes extremely powerful rare-earth Neodymium permanent magnets. The motor produces almost no noise, saves energy (60-80%) and is brushes, speed adjustable and durable. It provides a high starting torque even at low speed or from a complete stop. By using a modern technologically advanced micro-processor, Hall sensor and Pulse-Width Modulation technology, the Enduro™ Elite SM1050-2PF can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds. It will stop automatically with any interruption such as in-line voltage, electrical surge, radio frequency interference or overloading. It is fully protected by the software and will give error messages indicating which problem is encountered. It even works well in environments with an unstable electrical power supply. All Enduro™ Elite SM1050-2PF Servo Motors use the same mounting holes as standard clutch motors. Non-Positioner Servo Motor 220V Single Phase Cycles: 50/60 Watts: 0-1400 Torque: 0-3.7 Foot Pounds Variable Speed to 5000 RPM Features and Settings: Motor rotating direction setting Slow starting speed Maximum speed setting Needle Position Setting Supplied With: Instruction manual / parts list Mounting hardware Pulley cover (belt guard) 100mm pulley Horizontal push-button on/off switch with heavy duty UL® 10' wire lead for easy overhead hook-up Positioner sensor kit Foot Lift Output Additional Information: Motor Weight: 11.6 lbs. Motor Dimensions: 11.25" L x 7.5" W x 8.5" H Shipping Weight: 14.85 lbs Shipping Dimensions: 14" L x 11.5" W x 10.5" H