Ensinger Tecaform Acetal Copolymer Rod .75 Dia. $ Is Per Ft. Will Cut To Size

US $490

Rutland, Massachusetts, United States
Nov 27th

Open on mobile:
QR code

Material excess. Price is per ft. 22$/ft=market price Ensinger TECAFORM™ ACETAL COPOLYMER TECAFORM™ is commonly used as bushings, rollers, wear strips and other applications requiring a combination of strength, low moisture absorption, chemical resistance and dimensional stability. TECAFORM™ is a semi-crystalline thermoplastic offering high strength, stiffness and toughness. TECAFORM™ is resistant to hot water, hydrocarbons and solvents, and it possesses good bearing and wear properties. It is available in natural and black grades. TECAFORM™ is commonly used as bushings, rollers, wear strips and other applications requiring a combination of strength, low moisture absorption, chemical resistance and dimensional stability. No centerline porosity Low moisture absorption Excellent machinability Good combination of mechanical properties Chemical resistance to fuels and solventsTECAFORM™ is resistant to aqueous solutions with pH values ranging from 4 to 14. Good wear and abrasion properties Natural grade is manufactured from resins that are FDA, USDA, NSF and 3A Sanitary compliant Good dimensional stability Good property retention at elevated temperatures Black Grades are also manufactured from resin that is FDA compliant TECAFORM™ is used in a wide variety of industrial applications requiring good strength and toughness, dimensional stability, wear resistance and the ability to operate in a wet environment with little absorption. Material handling, machinery and fluid handling are some of the common industries utilizing TECAFORM™ ’s combination of properties. Typical applications are gears, wear strips, bushings, pump parts, fittings and rollers. Typical Property Values PROPERTIES ASTM Test Method Units TECAFORM™ Physical Density D792 lbs/in3 0.0507 Specific Gravity D792 g/cc 1.41 Water Absorption @24 hours, 73°F D570 % 0.22 @Saturation, 73°F D570 % 0.8 Mechanical Tensile Strength @ Yield, 73°F D638 psi 8,800 Tensile Modulus D639 psi 380,000 Elongation @ Break, 73°F D638 % 25 Flexural Strength, 73°F D790 psi 11,000 Flexural Modulus, 73°F D790 psi 360,000 Compressive Strength D695 psi 4,500 Izod Impact Strength, 73°F D256 ft-lbs/in 1.0 Rockwell Hardness, 73°F D785 M Scale 86 Shore Hardness - D Scale - Wear Factor Against Steel, 40 psi, 50 fpm D3702 65 x 10-10 Static Coefficient of Friction D3702 - - Dynamic Coefficient of Friction, 40 psi, 50 fpm D3702 - 0.21 Thermal Heat Deflection Temperature @ 66 psi D648 °F 316 @ 264 psi D648 °F 230 Coefficient of Linear Thermal Expansion D696 in/in/°F 4.7 x 10-5 Maximum Service Temperature Intermittent - °F 285 Long Term UL746B °F 195 Specific Heat - BTU/lb-°F - Thermal Conductivity - - - Vicat Softening Point - °F - Melting Point D2133 °F 329 Flammability UL94 HB Electrical Surface Resistivity D257 ohm/square - Volume Resistivity D257 ohm-cm 1.0 x 1014 Dielectric Strength D149 V/mil 500 Dielectric Constant @ 60 Hz, 73°F, 50% RH D150 - 3.7 @ 1 MHz D150 - - @ 20 GHz D150 - - @ 30 GHz D150 - - Dissipation Factor, @ 60 HZ, 73°F D150 - 0.001 This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved. Data obtained from extruded shapes material. MATERIAL AVAILABILITY Rods: Diameters: Up to 4 3/4”, 10’ length Length: 5” and greater, 5’ length Plates: 1/4” to 2” thickness inclusive are 2’ x 4’, 4’ x 8’, 4’ x 10’ 2-1/4” to 4” thickness inclusive are 2’ x 4’ Primary Specification (Resin) (Typical) Natural ASTM-D-6778 POM0211 Black ASTM-D-6778 POM0211 Shapes Specification (Typical) Natural ASTM-D-6100 S-POM0211 Black ASTM-D-6100 S-POM0211 Materials Manufacturer3A Arkema Avery Covestro Ensinger MACtac Piper Plastics Plaskolite Primex Quadrant Sekisui Industry Brands Application Search Catalog As this is an industrial product, and as a token of fairness to Mass purchasers we will not charge Mass sales tax. We feel it is unfair for in-state purchasers to be burdened with a tax that those, living anywhere else in the world, are free of. We are not evading sales tax. We simply choose to cover the cost for our in-state customers ourselves.