+ Post new Ad
Equilizer The Sabre Urathane Cutting Knife SC532 19" Long, US $55 – Picture 0
Equilizer The Sabre Urathane Cutting Knife SC532 19" Long, US $55 – Picture 0

Equilizer The Sabre Urathane Cutting Knife Sc532 19" Long

US $55

  • Rupert, Idaho, United States
  • Nov 1st
Open on mobile:
QR code
The Sabre™ features a quick-change design that allows you to remove the old blade and put in a new one in ten seconds.  Unique design has a steel pin that holds the blade in place.  Sabre™ has a width of only 1/8" and fits easily into any area below the dash.  The handle is long enough to accommodate both hands for a firm cutting grip.  Total length of the tool is 20" with the blade installed.  Comes with one standard utility knife blade.  Uses all standard utility knife blades and our ULB582 extra long utility knife blades.  To use: Cut forward then lift Sabre™ up so the blade clears the urethane. If you drag Sabre™ backwards it can push the blade out of the tool.  Made in USA.

Directions

Similar products from Chisels & Mallets

Reduced - Crown/Woodcraft Boxed Butt Chisels, 4 piece

Reduced - Crown/Woodcraft Boxed Butt Chisels, 4 piece

  • Independence, Kentucky, United States
  • Nov 2nd
Knife Hand Set Wood 12pc Woodworkers Gouges Tool Carving Professional Chisel

Knife Hand Set Wood 12pc Woodworkers Gouges Tool Carving Professional Chisel

  • Shanghai, China
  • Nov 2nd
8pcs Pottery Wood Carving Hand Chisel Tool Set Woodworkers Gouges Professional

8pcs Pottery Wood Carving Hand Chisel Tool Set Woodworkers Gouges Professional

  • HK, Hong Kong
  • Nov 2nd
Mortise Chisel Set Small Tool Fine Grained Blades Tempered Chrome Steel Bevel

Mortise Chisel Set Small Tool Fine Grained Blades Tempered Chrome Steel Bevel

  • Johnsonville, South Carolina, United States
  • Nov 2nd
Footprint - 578 Scutch Comb Holder 1in

Footprint - 578 Scutch Comb Holder 1in

  • Camden, London, United Kingdom
  • Nov 1st
Footprint - 578 Scutch Comb Holder 1.1/2in

Footprint - 578 Scutch Comb Holder 1.1/2in

  • Camden, London, United Kingdom
  • Nov 1st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 6mm (1/4in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 6mm (1/4in)

  • Camden, London, United Kingdom
  • Nov 1st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 25mm (1in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 25mm (1in)

  • Camden, London, United Kingdom
  • Nov 1st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 38mm (1.1/2in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 38mm (1.1/2in)

  • Camden, London, United Kingdom
  • Nov 1st
Stanley Tools - FatMax Bevel Edge Chisel with Thru Tang 50mm (2in)

Stanley Tools - FatMax Bevel Edge Chisel with Thru Tang 50mm (2in)

  • Camden, London, United Kingdom
  • Nov 1st
Narex Cabinet Scraper Burnisher with Stained Hornbeam Handle 872401

Narex Cabinet Scraper Burnisher with Stained Hornbeam Handle 872401

  • USA, United States
  • Nov 1st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 32mm (1 1/4in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 32mm (1 1/4in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 50mm (2in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 50mm (2in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M444 Bevel Edge Chisel Blue Chip Handle 25mm (1in)

IRWIN Marples - M444 Bevel Edge Chisel Blue Chip Handle 25mm (1in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 16mm (5/8in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 16mm (5/8in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 10mm (3/8in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 10mm (3/8in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 3mm (1/8in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 3mm (1/8in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 19mm (3/4in)

IRWIN Marples - M373 Bevel Edge Chisel Splitproof Handle 19mm (3/4in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M444 Bevel Edge Chisel Blue Chip Handle 32mm (1 1/4in)

IRWIN Marples - M444 Bevel Edge Chisel Blue Chip Handle 32mm (1 1/4in)

  • Camden, London, United Kingdom
  • Oct 31st
IRWIN Marples - M444 Bevel Edge Chisel Blue Chip Handle 3mm (1/8in)

IRWIN Marples - M444 Bevel Edge Chisel Blue Chip Handle 3mm (1/8in)

  • Camden, London, United Kingdom
  • Oct 30th

People who viewed this item also vieved

Lot 3176 Base Moulding Weinig / WKW Corrugated Knives Shaper Moulder

Lot 3176 Base Moulding Weinig / WKW Corrugated Knives Shaper Moulder

  • College Station, Texas, United States
  • Jan 30th
4.5" Premium Segmented Diamond Cut Wheel

4.5" Premium Segmented Diamond Cut Wheel

  • Peoria, Arizona, United States
  • Jan 30th
Diamond Pro Platinum Series Diamond Cup Wheel 4 x 5/8 -11 Diamond Coated

Diamond Pro Platinum Series Diamond Cup Wheel 4 x 5/8 -11 Diamond Coated

  • Peoria, Arizona, United States
  • Jan 30th
BILLINGS No. 403 Body Builder Clamp, 6.5" long overall, turns fine

BILLINGS No. 403 Body Builder Clamp, 6.5" long overall, turns fine

  • Lapeer, Michigan, United States
  • Jan 30th
BESSEY DRILL PRESS VISE bv-DP40 WS-1 Corner Clamp

BESSEY DRILL PRESS VISE bv-DP40 WS-1 Corner Clamp

  • Utica, New York, United States
  • Jan 30th
brink & cotton no 010 wooden clamps

brink & cotton no 010 wooden clamps

  • Churchill, Ontario, Canada
  • Jan 30th
Hawera SDS Plus S4 Hammer Drill Bit Part No. 90029 3/8" x 10"

Hawera SDS Plus S4 Hammer Drill Bit Part No. 90029 3/8" x 10"

  • Modesto, California, United States
  • Jan 30th
SDS-4 Powers Fasteners Carbide Hammer Drill Bit 1/4" x 6" Part# 0321

SDS-4 Powers Fasteners Carbide Hammer Drill Bit 1/4" x 6" Part# 0321

  • Modesto, California, United States
  • Jan 30th
SDS-4 Powers Fasteners Carbide Hammer Drill Bit 1" x 10" Part No. 0380

SDS-4 Powers Fasteners Carbide Hammer Drill Bit 1" x 10" Part No. 0380

  • Modesto, California, United States
  • Jan 30th
Wood Veneer Red Oak 12x24 22pcs total Raw Veneer "EXOTIC" RO2 11-11

Wood Veneer Red Oak 12x24 22pcs total Raw Veneer "EXOTIC" RO2 11-11

  • Jeffersonville, Indiana, United States
  • Jan 30th
Wood Veneer Red Oak 10x47 22pcs total Raw Veneer "EXOTIC" RO8 8-13

Wood Veneer Red Oak 10x47 22pcs total Raw Veneer "EXOTIC" RO8 8-13

  • Jeffersonville, Indiana, United States
  • Jan 30th
Wood Veneer Walnut 48x98 1pcs total 3-Ply Wood Backed "EXOTIC" STOCK #10

Wood Veneer Walnut 48x98 1pcs total 3-Ply Wood Backed "EXOTIC" STOCK #10

  • Jeffersonville, Indiana, United States
  • Jan 30th
Parks Model 95, 96, and 97, 12 Inch Planer Manual

Parks Model 95, 96, and 97, 12 Inch Planer Manual

  • South Lyme, Connecticut, United States
  • Jan 30th
Operator's Manual Craftsman 11" band saw model 315.214500 on CD_M-SC-500_01

Operator's Manual Craftsman 11" band saw model 315.214500 on CD_M-SC-500_01

  • Plantsville, Connecticut, United States
  • Jan 30th
Foley Belsaw Model 399 Chain Saw Grinder Owners Manual * 1065

Foley Belsaw Model 399 Chain Saw Grinder Owners Manual * 1065

  • Goddard, Kansas, United States
  • Jan 30th
LS STARRETT NO 368 PRECISION SHRINK RULE 5-16 TO FOOT 24" RANGE

LS STARRETT NO 368 PRECISION SHRINK RULE 5-16 TO FOOT 24" RANGE

  • Ellington, New York, United States
  • Jan 30th
JLT 79K-6-DC 26" x 62" Capacity Single Station - Pneumatic Door Framing Machine

JLT 79K-6-DC 26" x 62" Capacity Single Station - Pneumatic Door Framing Machine

  • Ridgewood, New York, United States
  • Jan 30th
Bench Dog Tools 10-077 Glue Brush, 2-Pack - (measures 7-Inch long)

Bench Dog Tools 10-077 Glue Brush, 2-Pack - (measures 7-Inch long)

  • Ontario, California, United States
  • Jan 30th
1 PCS CNC router woodworking cove box bits 1/2'' 1"

1 PCS CNC router woodworking cove box bits 1/2'' 1"

  • JINAN CITY , SHANDONG PROVINCE, China
  • Jan 30th
1-1/4 bore 1-1/8 cut 4 dia carbide insert 343 Shaper cutter straight rabbet dado

1-1/4 bore 1-1/8 cut 4 dia carbide insert 343 Shaper cutter straight rabbet dado

  • Greenville, South Carolina, United States
  • Jan 30th
1-1/4 carbide tip Shaper Cutter Industrial head 105 Ogee

1-1/4 carbide tip Shaper Cutter Industrial head 105 Ogee

  • Greenville, South Carolina, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies