Etcr 6800d Leakage Current Clamp Meter Rs232 Dc 0.0a~2000a/ Ac 0.0a~1500a

US $204.00

Hefei, Anhui Province, China
Jan 29th

Open on mobile:
QR code

Introduction ETCR6800D Clamp Meter is specially designed for measurement online of AC/DC leakage current with voltage below 600V; by adopting up-to-date CT technology and digital integration technology, There is not metallic conductor outside the clamps, non-contact test to ensure save. It is a product with relatively small size, large clamp, high accuracy and perfect function, widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining. It is essential tool for electrician safety testing. This High Accuracy Clamp Leaker have the function of peaking holding, data holding data storage; obtains one USB interface. With the help of the software that we provide, many functions are available. For example, the meter can realize on-line monitoring, historical data inquiry, active curve drawing, indication of max, min and average value and indication, alarm value setting, indication of alarm value, historical data inquiry, export, and print. II. Technical Specification Function Measure AC/DC current, peak hold, online monitor Size of clamp ?68mm Range DC:0.0A~2000A AC:0.0A~1500A Accuracy ±2%rdg±3dgt Resolution 0.1A Dimension 224mmx115mmx43mm Data interface USB Weight 515g(with battery) Power Supply Zn-Mn dry battery 6F22 9V, lasting for100hours Test Mode Clip-on CT, noncontact mode Display Mode Four digits LCD display LCD Dimension 35mmx21.5mm; display domain: 32mmx15mm Frequency AC 45Hz~400Hz Sampling Rate 2 times/s Polarity Indication DC current auto identified and display“—” Test Position Tested wire in the jaw center; Error will increase to 1.5%rdg max if deviate the center Range Shift Automatically Line Voltage AC600V Software with the software the data can upload to computer Data Memory 99units, FULL blinks when the memory is full Peak Hold Push HOLD without release, the meter will show the peak value during the pushing period Reading Hold DH indicating the reading is hold Out of Range OL indicating the current is out of range Auto Power-off 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed ( Battery not included for air shipping security reason) Consumption 10mW Temperature and Humidity -10°C~50°C; Below 80%rh Max error refer to environment -10°C~0°C,40°C~50°C,Error will increase max to 1%rdg Temperature and Humidity for storage -10°C~60°C,below 70%rh Insulating Strength AC2kV/rms. (between the alloy of the clamp and the housing) Applicable safety rules IEC1010-1, IEC1010-2-032, Pollution level 2, CAT III(600V) Accessories Meter: 1pc; USB communication line: 1pc; software: 1pc; battery (6F22 9V):1pc. III. Field Application Note: Make sure your address, phone number left on the order is correct, especially if you are from Russia, please fulfil your full name as Russian Custom requested. Custom duty: could be charged in destination country in a very small possibility, I will try to make the declare value as lower as possible to decrease the possiblity in further, however if it happens, it should be respond of buyers.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	ETCR
Country/Region of Manufacture	China
Model	ETCR6800D
Country of Manufacture	China