Ethernet Ip Controller Ipsw2210 Web Server Relay Snmp Email+temperature Sensor

US $85.00

Europe, Bulgaria
Jun 9th

Open on mobile:
QR code

IPSW2210 - IP Sensor and Watchdog IPSW2210 - IP Sensor and Watchdog for remote monitoring and control over M2M Technical Features Power supply 12VDC / 0.5 A (adapter) – Jack ?5.5 x 2.0 / 10mm - Not included Network standards: IEEE 802.3, 10 Mbit/s Network connection: RJ 45 – 10BASE-T / 10 Mbps Network protocol – TCP/IP and HTTP Operating conditions: - 10 to + 60 °C 2 dry contact inputs (volt free) Relay Output – 7A / 30VDC / 220VAC 1-Wire sensor input – RJ11 for connecting up to 5 temperature or temperature & humidity sensors Aluminium enclosure Dimensions 112 x 40 x 50 [mm] / wall mount IPSW2210 is a device with build on Ethernet web server with 2 dry contact inputs, relay output, temperature & humidity sensor input and ICMP ping watchdog. Controller enables monitoring over IP (Web, SNMP) and sends alerts if sensor values out of range (e-mail, SNMP trap). Configuration and control over TCP/IP and SNMP v2. The IPSW2210 supports a number of Ethernet protocols with it's built-in server, including HTTP, SNMP, NTP and XML. On-line Demo link (Username: admin; Password: admin) Benefits Easy and fast configuration – full configuration can be performed through the Web using a web browser. Control and configuration over TCP/IP and SNMP v2 IP security – access to the IPSW2210 is protected by name and password 2 dry contact inputs 1 Relay Output for resetting monitored device Temperature & humidity sensor input Measures temperatures from -40°C to +85°C and humidity from 0 to 100% RH Monitoring of one IP device (server, router, camera) with automatic reboots in terms of monitored actions Methods of monitoring IP devices: - Incoming ping - Outgoing ping Alarm alert – SNMP trap and E-mail XML (over HTTP) SNTP synchronization protocol Firmware update over IP Application Examples General Application Watchdog IP device Control device that is powered by 220VAC General Application 2 Sensors Temperature sensor ST102 Technical Features 2.5m long cable with alluminium probe and connector RJ11 Operating temperature range -40°C to +85°C Temperature sensor resolution 0.1 °C Temperature measuring accuracy ± 0.5 °C in range from -10°C to +85°C and otherwise ±2.0°C Communication 1-Wire bus (Data, GND, +5V) Links Ethernet IP Controller - IPSW2210 Manual v2.01 Temperature sensor - ST102 Manual eBay listing - Temperature and humidity sensor STH102 + T-box splitter