Exaktor Overarm Dust Hood

US $13000

Longmont, Colorado, United States
Nov 11th

Open on mobile:
QR code

Purchased in July of 2015, this dust hood has seen less than 20 minutes of use. From Exaktor: Tired of holding your breath while dust flies in your face? This professional-grade table saw dust hood features a huge basket that collects virtually 100% of the dust that is thrown above the table. With wheels at both front and back, stock glides smoothly beneath, while maintaining just enough air intake for optimum dust collection. When you need access to the blade, the scissor lift mechanism with counterbalanced weight lets you lift up the hood with just the touch of a finger. Adjustable horizontal boom will fit a table saw with fence extending up to 70" from the blade. Hardware and fittings are included for mounting either to the floor or to the edge of the saw table. A 4" hose with 700-800 CFM dust extractor is recommended. Parts for the Exaktor dust hood are precision formed by computer-controlled machines to exact tolerances. The telescopic boom is aluminum tubing. The Mast is manufactured from steel tubing. The suspension and guard basket frame are steel. They are coated with a hard baked-on powder coat finish to resist corrosion and provide a smooth working surface. The lenses in the guard basket are 1/8" thick shatterproof plastic. Features: · Guard basket is equipped with in-feed and out-feed wheels. This allows the guard basket to roll up and over the work piece and position the guard basket the correct height above the work piece for optimum dust collection · Shuttered openings at the back of the guard basket allow for the use of splitter and anti-kick-back pawls provided with the user's table saw · Bottom edge of the guard basket can be raised up 7" above the saw table. If more height is required, the horizontal boom and guard basket can be swung out of the way · Easy installation, only three tools are required to install: a 3/8" electric drill, a screw driver and an adjustable wrench. The assembly instructions are included with the unit · Flexible installation options · The Exaktor blade cover can be attached to either the right or left-hand end, or back edge of a saw table up to 35" high · The telescopic boom is adjustable to accommodate a rip fence extending up to 70" from the saw blade · The guard basket can be adjusted forward and backward to accommodate saw tables with different depths. Where floor space is not available, the vertical mast can be upended and hung from above the table saw · Boom consists of two aluminum tubular extrusions · Outer Tube Diameter: 4" · Inner Tube Diameter: 3-1/2" · Three UHMW sleeves between the tubes allow the boom to be easily adjusted for length · Brand: Exaktor · Manufacturer Part Number: EXOA-2 · Weight (lbs): 47.0000