Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 0

Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 1

Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 2

Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 3

Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 4

Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 5

Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 6

Exalt EX-5i-DS3 1xDS3 + 16xT1/E1 10/100BaseT Tri-band Wireless Microwave Radio, US $2,200.00 – Picture 7

Exalt Ex-5i-ds3 1xds3 + 16xt1/e1 10/100baset Tri-band Wireless Microwave Radio

US $2,200.00

Salem, Oregon, United States
Jan 30th

Open on mobile:
QR code

This is an Exalt EX-5i-DS3 Tri-band Wireless Backhaul Microwave Radio Interface type: 10/100BaseT + 16xT1/E1 + 1xDS3 AC Power. PN: 201133-A03 This was pulled from a working system 90 Day Hardware Warranty Free Fedex Ground Shipping in the lower 48 States. Let me know if you have any questions M-F 9:00-5:00 PST (503) 391-8191 x 118 Here is the boot up: 1. Radio information 2. Configuration 3. Status 4. Exit 9. Help Select from 1 to 4, 9: 1 Model name: EX-5i-DS3 Part number: 201133-A03 Serial number: PE48XXXX90 Interface type: 10/100BaseT + 16xT1/E1 + 1xDS3 Firmware version: 1.0.2 (Jan 21 2009 - 09:06:19) RF frequency band: 5.250 GHz - 5.850 GHz Hardware ID number: 63cfd06bfb7bXXXX Select from 1 to 4, 9: 2 1. Current IP settings 2. Current system configuration 3. Set endpoint identifier 4. Set IP parameters 5. Administration 0. Back/9. Help Select from 0 to 5, 9: 2 SYS: Radio B SYS: mode: Mode 1 (QPSK) SYS: tx_power: 4.000000 dBm SYS: bandwidth: 8 MHz SYS: rf_freq: 5.787000 GHz SYS: link distance: 10 miles SYS: tdd_frame_size: 2.000000 ms SYS: dfs_ant_gain: 29 dB SYS: ext_alarm_input_1: Alarm when close SYS: ext_alarm_input_2: Alarm when close Press enter to continue... Eth: channel:1 Eth: enable:2 Eth: mode: 100 full duplex Eth: alarm_enable:1 Eth: channel:2 Eth: enable:1 Eth: mode: 100 full duplex Eth: alarm_enable:1 Press enter to continue... T/E1: channel:1 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:2 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:3 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:4 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:5 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:6 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:7 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:8 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:9 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:10 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:11 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:12 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:13 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:14 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:15 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:16 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS Press enter to continue... 1. Current IP settings 2. Current system configuration 3. Set endpoint identifier 4. Set IP parameters 5. Administration 0. Back/9. Help Select from 0 to 5, 9: The EX-5i series of all-indoor digital microwave radios is the first family of carrier-class, tri-band TDD radios available in the 5.2 – 5.8 GHz license-exempt bands. The EX-5i line delivers up to 216 Mbps of aggregate user throughput and up to sixteen T1/E1s plus one DS3. Featuring native TDM and native Ethernet transport and full software configurability and upgradeability, the EX-5i series was designed to meet demanding backhaul requirements of enterprise organizations and service providers seeking the accessibility benefits of an all-indoor configuration. Carrier-class TDD. The EX-5i series radios combine native TDM and native Ethernet transport with low, fixed latency to deliver guaranteed throughput and service quality. Capacity can be allocated variably between TDM and Ethernet via software, while the selectable throughput symmetry control feature enables radio capacity to efficiently match asymmetric traffic requirements. Optional 1+1 monitored hot standby (MHS) protection provides full hardware redundancy

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Exalt
MPN	EX-5i-DS3
Model	EX-5i-DS3