+ Post new Ad
FASTCAP STEALTH BRACE SB-16 HD 9/16" COUNTERSUNK HOLES, US $10.99 – Picture 0
FASTCAP STEALTH BRACE SB-16 HD 9/16" COUNTERSUNK HOLES, US $10.99 – Picture 1
FASTCAP STEALTH BRACE SB-16 HD 9/16" COUNTERSUNK HOLES, US $10.99 – Picture 0
FASTCAP STEALTH BRACE SB-16 HD 9/16" COUNTERSUNK HOLES, US $10.99 – Picture 1

Fastcap Stealth Brace Sb-16 Hd 9/16" Countersunk Holes

US $10.99

  • Lee's Summit, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
FASTCAP STEEL BRACE SB-16 HD STEALTH 9/16” COUNTERSUNK HOLES   If you want a clean countertop overhang with no expensive corbels to bang your knees on, then the Stealth Speed Brace is more than up to the job. Made of thick 1/4" steel with a coat of gray primer so you can paint them to match your woodwork or countertop. Each brace can support up to 300 lbs. Just rout a recess into the top of the cabinet and screw it in place - it's nearly invisible once installed. Go ahead and sit on the overhang, it will not sag. Also available from Rockler, FastCap Stealth Speed Braces in Black Finish. ·         The FastCap Stealth Speed Brace is made of solid 1/4" thick steel. ·         Screw holes are countersunk into the brace for a flush installation.  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand FastCap
MPN SB-16 STEALTH PRIMED

Directions

Similar products from Other Woodworking Equipment & Tools

Amana Spiral Up cut Solid Carbide Router Bit 46102

Amana Spiral Up cut Solid Carbide Router Bit 46102

  • Tracy, California, United States
  • Jan 30th
6Pc Carpenters Carpentry Pencils Bulk Joiners Woodwork DIY Tools Pack Set

6Pc Carpenters Carpentry Pencils Bulk Joiners Woodwork DIY Tools Pack Set

  • London, United Kingdom
  • Jan 30th
RECORD RIDGWAY MARPLES UK TOOLS CATALOG 1981 #RR347 planes Vise clamp chisels

RECORD RIDGWAY MARPLES UK TOOLS CATALOG 1981 #RR347 planes Vise clamp chisels

  • Perth, Ontario, Canada
  • Jan 30th
Double edge laminate trimmer UO-401DET NEW IN PACKAGE A6

Double edge laminate trimmer UO-401DET NEW IN PACKAGE A6

  • Grayslake, Illinois, United States
  • Jan 30th
STARK 4 WING CARBIDE TIPPED TABLE EDGE DETAIL SHAPER CUTTER - 1 1/16" HIGH

STARK 4 WING CARBIDE TIPPED TABLE EDGE DETAIL SHAPER CUTTER - 1 1/16" HIGH

  • Lebec, California, United States
  • Jan 30th
New Mirka 22-622-120 BaseCut 6" Velcro Hook & Loop Sanding Discs 120G, Qty. 50

New Mirka 22-622-120 BaseCut 6" Velcro Hook & Loop Sanding Discs 120G, Qty. 50

  • Athens, Georgia, United States
  • Jan 30th
Edco Saw Jam Nut 50019 (Lot of 2)

Edco Saw Jam Nut 50019 (Lot of 2)

  • Fayetteville, Arkansas, United States
  • Jan 30th
Lot 100 Corrugated Steel Wood Joints, Biscuits, Woodworking Ties Connectors New

Lot 100 Corrugated Steel Wood Joints, Biscuits, Woodworking Ties Connectors New

  • Springfield, Tennessee, United States
  • Jan 30th
Orange Push Stick For Joiner Router Table, Tablesaw Etc.

Orange Push Stick For Joiner Router Table, Tablesaw Etc.

  • Plant City, Florida, United States
  • Jan 30th
Snappy 6" #2 square drivers for pocket screws, 2 pak

Snappy 6" #2 square drivers for pocket screws, 2 pak

  • Belleville, Wisconsin, United States
  • Jan 30th
Shop Fox / Woodstock Internation Inc. Featherboard D3096

Shop Fox / Woodstock Internation Inc. Featherboard D3096

  • Sturgis, Michigan, United States
  • Jan 30th
Solid Carbide Panel pilot bevel trim router bits

Solid Carbide Panel pilot bevel trim router bits

  • Tracy, California, United States
  • Jan 30th
ROCKLER HD BALL BEARING ADJUSTABLE STAND#61639 LOAD=220LBS 28-3/4"-47"

ROCKLER HD BALL BEARING ADJUSTABLE STAND#61639 LOAD=220LBS 28-3/4"-47"

  • Des Moines, Iowa, United States
  • Jan 30th
VELOX CNC 8" Z Axis CNC Router Slide - K2CNC specs

VELOX CNC 8" Z Axis CNC Router Slide - K2CNC specs

  • Orange, California, United States
  • Jan 30th
Woodworking 201A Portable edge bander banding machine 110V/220V US1

Woodworking 201A Portable edge bander banding machine 110V/220V US1

  • CN,CN, China
  • Jan 30th
AMANA TOOL MODEL No. 985-VC, VERTICAL PANEL RAISING / SHEAR FACE SHAPER CUTTER

AMANA TOOL MODEL No. 985-VC, VERTICAL PANEL RAISING / SHEAR FACE SHAPER CUTTER

  • Denver, Colorado, United States
  • Jan 30th
Silverline Hardwood Brass Screw Mini Mortice Gauge 130Mm Joinery Precision Tools

Silverline Hardwood Brass Screw Mini Mortice Gauge 130Mm Joinery Precision Tools

  • London, United Kingdom
  • Jan 30th
Shaper Head And Large Cutter Set - Uncleaned But Sharp And Nice

Shaper Head And Large Cutter Set - Uncleaned But Sharp And Nice

  • Mickleton, New Jersey, United States
  • Jan 30th
High-RPM Spindle Motor for router BARELY USED!

High-RPM Spindle Motor for router BARELY USED!

  • Clearwater, Florida, United States
  • Jan 30th
Freud UP109 3/4" Convex Radius Shaper Cutter

Freud UP109 3/4" Convex Radius Shaper Cutter

  • Menomonee Falls, Wisconsin, United States
  • Jan 30th

People who viewed this item also vieved

CRAFTSMAN belt sander manual 207.22301

CRAFTSMAN belt sander manual 207.22301

  • Fort Worth, Texas, United States
  • May 27th
DELTA #32-100 BISCUIT JOINER

DELTA #32-100 BISCUIT JOINER

  • Hampden, Massachusetts, United States
  • May 27th
Delta RC-33 13" wood planer

Delta RC-33 13" wood planer

  • New Port Richey, Florida, United States
  • May 28th
Amana Tool 55237 Carbide Tipped Adjustable Countersink w/Depth-Stop 3/8 Dia x 49

Amana Tool 55237 Carbide Tipped Adjustable Countersink w/Depth-Stop 3/8 Dia x 49

  • USA, United States
  • May 27th
*NEW* Freeborn Tool 3" Outside Dimension 1 1/4" Inside Dimension 1 1/4" KF

*NEW* Freeborn Tool 3" Outside Dimension 1 1/4" Inside Dimension 1 1/4" KF

  • Lawrenceville, Georgia, United States
  • May 27th
*NEW* Amana Tool SC504 Raised Panel Cutter for 3/4 Stock

*NEW* Amana Tool SC504 Raised Panel Cutter for 3/4 Stock

  • Lawrenceville, Georgia, United States
  • May 27th
Used half vacuum pod from a Busellato Super Junior CNC router

Used half vacuum pod from a Busellato Super Junior CNC router

  • Brighton, Michigan, United States
  • May 28th
Used full vacuum pod from a Busellato Super Junior CNC router

Used full vacuum pod from a Busellato Super Junior CNC router

  • Brighton, Michigan, United States
  • May 28th
Desmond Stephan Woodworking Vice Rear Jaw WW9C (From the W10 vice)

Desmond Stephan Woodworking Vice Rear Jaw WW9C (From the W10 vice)

  • Seattle, Washington, United States
  • May 28th
Wood Veneer Beech 48x108 1pcs total 10Mil Paper Backed "EXOTIC" 1610 18

Wood Veneer Beech 48x108 1pcs total 10Mil Paper Backed "EXOTIC" 1610 18

  • Jeffersonville, Indiana, United States
  • Jun 2nd
Wood Veneer Beech 48x120 1pcs total 10Mil Paper Backed "EXOTIC" 1610 17

Wood Veneer Beech 48x120 1pcs total 10Mil Paper Backed "EXOTIC" 1610 17

  • Jeffersonville, Indiana, United States
  • Jun 2nd
Wood Veneer Beech 48x108 1pcs total 10Mil Paper Backed "EXOTIC" 1610 16

Wood Veneer Beech 48x108 1pcs total 10Mil Paper Backed "EXOTIC" 1610 16

  • Jeffersonville, Indiana, United States
  • Jun 2nd
Evolution 10" Wood Blade 10BLADEWD

Evolution 10" Wood Blade 10BLADEWD

  • Arlington, Texas, United States
  • Jun 3rd
Mk Morse MK Morse ZCLB06 6PTI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch

Mk Morse MK Morse ZCLB06 6PTI Woodworking Stationary Bandsaw Blade, 93-1/2-Inch

  • USA, United States
  • Jun 3rd
Evolution 10" Aluminum Blade 10BLADEAL

Evolution 10" Aluminum Blade 10BLADEAL

  • Arlington, Texas, United States
  • Jun 3rd
SANDING DISC’S (Flat Face)) SD750 7/8 Bore Yellow Fine 7 inch Diameter

SANDING DISC’S (Flat Face)) SD750 7/8 Bore Yellow Fine 7 inch Diameter

  • Iron River, Michigan, United States
  • Jun 4th
SANDING DISC’S (Flat Face) SD7125H 7/8 Bore Orange EX-Coarse 7" Diameter W/Holes

SANDING DISC’S (Flat Face) SD7125H 7/8 Bore Orange EX-Coarse 7" Diameter W/Holes

  • Iron River, Michigan, United States
  • Jun 4th
SANDING DISC’S (Flat Face)) SD790H 7/8 Bore Green Coarse 7 inch Diameter W/Holes

SANDING DISC’S (Flat Face)) SD790H 7/8 Bore Green Coarse 7 inch Diameter W/Holes

  • Iron River, Michigan, United States
  • Jun 5th
LOT OF 74 NEW GENUINE LAWSON DRILL BITS ASSORTED PN: 80429-80468 WARRANTY

LOT OF 74 NEW GENUINE LAWSON DRILL BITS ASSORTED PN: 80429-80468 WARRANTY

  • Evansville, Indiana, United States
  • Jun 11th
E-Z Red Super Low Profile Torx Bitet [9 Pack]

E-Z Red Super Low Profile Torx Bitet [9 Pack]

  • Port Richey, Florida, United States
  • Jun 11th
Hitachi 728452 3/8-Inch By 12-Inch Round Shank Installer/Aircraft Hss Drill Bit

Hitachi 728452 3/8-Inch By 12-Inch Round Shank Installer/Aircraft Hss Drill Bit

  • USA, United States
  • Jun 11th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies